Ambientes de trabalho dos leitores #27 Neste 27º artigo da Série de Ambientes de Trabalho dos Leitores do Ubuntued apresentamos-lhe 46 excelentes visuais que foram submetidos durante esta semana. Este conjunto de visuais tem algumas particularidades únicas em relação aos artigos anteriores da Série.

Neste artigo, pela primeira vez, temos duas participações do próximo Ubuntu 12.04 Precise Pangolin (que ainda está em desenvolvimento) que será uma versão LTS, ou seja, que se espera acima de tudo alta estabilidade. Para além disso, neste artigo também é apresentado um sistema operativo não comum nesta série: um MacOS.

Relativamente às características destes 46 ambientes visuais, aqui poderá encontrar vários Conkys, Gnome-Shells, Unitys, temas GTK3 e GTK2, ícones e muitos Wallpapers. Relativamente a cores, existe uma grande diversidade, por isso, certamente haverá um visual que lhe agradará e que lhe poderá dar ideias para enriquecer o seu Ubuntu!

 

Como funciona esta série?

Esta série só existe porque os leitores do Ubuntued participam de forma ativa para a manter ao mais alto nível! Por esse simples motivo a sua participação é muito importante! Como você pode participar? Muito simples, visite esta página que disponibiliza uma aplicação (ver imagem abaixo) para agilizar o processo de partilha! E depois partilhe o seu visual aqui:

Fórum do Ubuntued: Mostre o seu Desktop!

Ubuntued Desktop

Como está feito este artigo?

Como é já comum nos outros artigos desta série, cada visual apresentado neste artigo é da responsabilidade do seu Autor. Quer isto dizer que, se tem alguma questão sobre esse visual, o melhor será você questionar diretamente o Autor ou então em resposta ao post que foi originalmente apresentado por esse Autor.

Para esse efeito, em cada um dos visuais apresentados neste artigo, você tem a oportunidade de ver a descrição redigida pelos Autores, o link para o local original desse ambiente (que você pode e deve aceder para questionar algo), link direto para a página do utilizador para o questionar diretamente. Relativamente às imagens tridimensionais apresentadas em algumas das participações, se você quiser ver com melhor definição os screenshots originais deverá visitar o link do local original, intitulado: “Página deste ambiente”.

 

Ubuntu Precise Pangolin

width="407"

Pangolin Em Preto E Branco

width="625"

Mnml

width="407"

Rosiance

width="625"

Outros Voos

width="625"

Sasuke

  • Página do Ambiente de Trabalho
  • Autor: anna kamilla
  • Sistema Operativo: Ubuntu 10.04 LTS (Lucid Lynx)
  • Tema: dust
  • Ícones:icone faenza dark (Opcional)
  • Wallpaper: NARUTO_sasuke_doodle_by_ari1020.jpg
  • outros: awn dust, com lxde e firefox 8, esqueci de dizer o tema do emerald kaG2 Dark

width="625"

Ubuntu 11.10

Mac Osx Lion 10.7.2

Mac Osx Lion 10.7.21M

Melancias Gnome

width="625"

Bike Orange Blue

width="625"

GaviÂO (Corinthias 2011 CampeÂO)

GaviÂO (Corinthias 2011 CampeÂO)

Dna Ubuntu

width="625"

Pig Pink Ubuntu Girls

  • Página do Ambiente de Trabalho
  • Autor: Roger Braga
  • Sistema Operativo: Ubuntu 11.04 (Natty Narwhal)
  • Tema: GnomishBeige
  • Ícones: Learning to fly 2
  • AWN;
  • Covergloobus: Torn Paper;
  • Conky;
    conkyrc

    Código: Selecionar todos
    background yes
    use_xft yes
    xftfont sans:size=11
    xftalpha 1
    update_interval 1.0
    total_run_times 0
    own_window yes
    own_window_transparent yes
    own_window_type override #desktop
    own_window_hints below,sticky,skip_taskbar,skip_pager
    double_buffer yes
    # minimum_size 300 300
    # maximum_width 800
    draw_shades no
    draw_outline no
    draw_borders no
    draw_graph_borders no
    default_color d8d8d8
    default_shade_color 000000
    default_outline_color d9d7d6
    alignment br
    gap_x 60
    gap_y 80
    no_buffers yes
    uppercase no
    cpu_avg_samples 2
    override_utf8_locale no
    ##############################################
    #  Output
    ##############################################
    TEXT
    ${font sans:size=111}${alignr}${time %k:%M %p}${font}
    ${font sans:size=48}${alignr}${time %B %d %Y}${font}
    ${hr 1}
    ${alignr 10}CPU: ${cpu cpu0}% | RAM: ${memperc}%

width="625"

Black Swan

  • Página do Ambiente de Trabalho
  • Autor: Roger Braga
  • Sistema Operativo: Ubuntu 11.04 (Natty Narwhal)
  • Tema: Orta
  • Ícones: area.o43 SVG Icon theme
  • Wallpaper: http://img23.imageshack.us/img23/6307/1680c.png
  • AWN;
  • Cursor: Bold-Knob;
  • Covergloobus: Corner;
  • Conky;
    conkyrc

    Código: Selecionar todos
    # Conky, a system monitor, based on torsmo
    #
    # Any original torsmo code is licensed under the BSD license
    #
    # All code written since the fork of torsmo is licensed under the GPL
    #
    # Please see COPYING for details
    #
    # Copyright (c) 2004, Hannu Saransaari and Lauri Hakkarainen
    # Copyright (c) 2005-2010 Brenden Matthews, Philip Kovacs, et. al. (see AUTHORS)
    # All rights reserved.
    #
    # This program is free software: you can redistribute it and/or modify
    # it under the terms of the GNU General Public License as published by
    # the Free Software Foundation, either version 3 of the License, or
    # (at your option) any later version.
    #
    # This program is distributed in the hope that it will be useful,
    # but WITHOUT ANY WARRANTY; without even the implied warranty of
    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    # GNU General Public License for more details.
    # You should have received a copy of the GNU General Public License
    # along with this program.  If not, see <http://www.gnu.org/licenses/>.
    #
    alignment top_Right
    background no
    border_width 1
    cpu_avg_samples 2
    default_color white
    default_outline_color black
    default_shade_color white
    draw_borders no
    draw_graph_borders yes
    draw_outline no
    draw_shades no
    use_xft yes
    xftfont Ubuntu regular:size=10
    gap_x 20
    gap_y 138
    minimum_size 5 5
    net_avg_samples 2
    no_buffers yes
    out_to_console no
    out_to_stderr no
    extra_newline no
    own_window no
    own_window_class Conky
    own_window_type desktop
    stippled_borders 0
    update_interval 1.0
    uppercase no
    use_spacer none
    show_graph_scale no
    show_graph_range no
    double_buffer yesTEXT
    ${color #cc6633} ${font Courier-New:size=30}$alignc${time %H:%M:%S}
    ${color black}${font Courier-New:bold:size=12}$alignc${time %A} ${font Courier-New:bold:size=12}$alignc${time %d %b. %Y}$alignc${color black}${font Courier-New:size=12}wrong5tep
    ${font}
    ${font Arial:bold:size=10}${color #cc6633}SYSTEM ${color black} ${hr 2}$font${color black}${font Courier-New:size=10}$sysname $kernel $alignr $machine
    Intel Pentium 4 $alignr${freq_g cpu0}Ghz
    Uptime $alignr${uptime}
    File System $alignr${fs_type}${font Arial:bold:size=10}${color #cc6633}MEMORY ${color black}${hr 2}${font Courier-new:size=10}${color black}MEM $alignc $mem / $memmax $alignr $memperc%
    ${color black}$membar${font Arial:bold:size=10}${color #cc6633}CPU ${color black}${hr 2}${font courier-new:size=10}${color black}${cpu}% ${cpubar}

    ${font Arial:bold:size=10}${color #cc6633}HDD ${color black}${hr 2}

    ${font Courier-new:size=10}${color black}/home $alignc ${fs_used /home} / ${fs_size /home} $alignr ${fs_free_perc /home}%
    ${color black}${fs_bar /home}

    ${font Arial:bold:size=10}${color #cc6633}NETWORK ${color Black}${hr 2}

    $font${color black}${font Courier-New:size=10}IP on eth0 $alignr ${addr eth0}

    ${color black}Down $alignr ${downspeed eth0} kb/s
    ${color black}Up $alignr ${upspeed eth0} kb/s

    ${color black}Downloaded: $alignr  ${totaldown eth0}
    Uploaded: $alignr  ${totalup eth0}

    ${font Arial:bold:size=10}${color #cc6633}TOP PROCESSES ${color black}${hr 2}

    ${color black}${font Courier-new:size=10}${top_mem name 2}${alignr}${top mem 2} %
    ${top_mem name 3}${alignr}${top mem 3} %
    ${top_mem name 4}${alignr}${top mem 4} %
    ${top_mem name 5}${alignr}${top mem 5} %

width="625"

Hallowen Blue

width="625"

Female Flowers Ubuntu

  • Página do Ambiente de Trabalho
  • Autor: Roger Braga
  • Sistema Operativo: Ubuntu 11.04 (Natty Narwhal)
  • Tema: Prospero
  • Ícones: AwOken
  • Wallpaper: http://img51.imageshack.us/img51/4374/3 … intern.jpg
  • AWN;
  • Cursor: Bold-Knob;
  • Covergloobus: Caledonia;
  • Conky;
    conkyrc

    Código: Selecionar todos
    # conky configurationbackground yes
    use_xft yes
    xftfont neuropol x free:size=10
    xftalpha 1
    update_interval 1.0
    total_run_times 0
    own_window yes
    own_window_transparent yes
    own_window_type override
    own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
    double_buffer yes
    minimum_size 400 400
    maximum_width 1600
    draw_shades no
    draw_outline no
    draw_borders no
    draw_graph_borders no
    default_color C71585
    default_shade_color black
    default_outline_color 000000
    alignment top_left
    gap_x 12
    gap_y 12
    no_buffers yes
    uppercase no
    cpu_avg_samples 2
    override_utf8_locale no
    ##############################################
    #  Output
    ##############################################
    TEXT
    SYSTEM INFO:
    ${font neuropol x free:size=10}Host: $nodename | ${font neuropol x free:size=10}RAM: $mem/$memmax | ${font neuropol x free:size=10}Disk usage: ${fs_used /}/${fs_size /} | ${font neuropol x free:size=10}CPU usage: ${cpu cpu0}% CPU1 usage: ${cpu cpu1}%${font neuropol x free:bold:size=52}${time %H:%M:%S}
    ${font neuropol x free:bold:size=24}${time %A %d %B %Y}

width="625"

Redhead

width="407"

Foresight Linux

width="625"

Outros

Winter Shiver

width="625"

Love

  • Página do Ambiente de Trabalho
  • Autor: Roger Braga
  • Sistema Operativo: Ubuntu 11.04 (Natty Narwhal)
  • Tema: GnomishDark
  • Ícones: Mashup+5.4
  • Wallpaper: http://img835.imageshack.us/img835/6061 … 4iaivb.jpg
  • AWN;
  • Covergloobus: TWQUET;
  • Conky;
    conkyrc

    Código: Selecionar todos
    background yes
    use_xft yes
    xftfont ubuntu:size=8
    xftalpha 1
    update_interval 1.0
    total_run_times 0
    own_window yes
    own_window_transparent yes
    own_window_type override
    own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
    double_buffer yes
    minimum_size 200 200
    maximum_width 240
    draw_shades yes
    draw_outline no
    draw_borders no
    draw_graph_borders no
    default_color 6B8297
    default_shade_color black
    default_outline_color white
    alignment top_right
    gap_x 12
    gap_y 12
    no_buffers yes
    uppercase no
    cpu_avg_samples 2
    override_utf8_locale yes
    ##############################################
    #  Output
    ##############################################
    TEXT
    ${goto 60}${font Arial Black:size=16}${time %H:%M:%S}${font}
    ${alignc}${time %A %d %B %Y}
    System Info:${hr 2}
    Host:$alignr$nodename
    Uptime:$alignr$uptime
    Memory:${hr 2}
    RAM:
    $mem/$memmax${alignr}${memperc}% ${membar 8,60}
    Swap:
    $swap/$swapmax${alignr}${swapperc}% ${swapbar 8,60}CPU:${hr 2}
    Core 1: ${cpu cpu1}% ${alignr}${cpubar cpu1 6,100}
    Core 2: ${cpu cpu2}% ${alignr}${cpubar cpu2 6,100}
    Total: ${cpu cpu0}% ${alignr}${cpubar cpu0 6,100}
    ${cpugraph cpu0 18}
    Top Processes:${hr 2}
    ${top_mem name 1}${alignr}${top mem 1} %
    ${top_mem name 2}${alignr}${top mem 2} %
    ${top_mem name 3}${alignr}${top mem 3} %
    ${top_mem name 4}${alignr}${top mem 4} %
    ${top_mem name 5}${alignr}${top mem 5} %HDD:${hr 2}
    Home:
    ${fs_free /home}/${fs_size /home} ${alignr}${fs_used_perc /home}% ${fs_bar 8,60 /home}
    Root:
    ${fs_free /root}/${fs_size /root} ${alignr}${fs_used_perc /root}% ${fs_bar 8,60 /root}WEATHER ${hr 2}
    ${if_up eth0}
    ${voffset -10}${alignr 56}${font ConkyWeather:style=Bold:size=40}${execi 600 conkyForecast –location=BRXX0232 –datatype=WF}${font}
    ${voffset -50}${font Weather:size=40}y${font}  ${voffset -38}${font Arial Black:size=26}${execi 600 conkyForecast –location=BRXX0232 –datatype=HT}${font}${voffset 0}${alignc 43}${execpi 600 conkyForecast –location=BRXX0232 –datatype=DW –startday=1 –shortweekday} ${alignc 8}${execpi 600 conkyForecast –location=BRXX0232 –datatype=DW –startday=2 –shortweekday} ${alignc -29}${execpi 600 conkyForecast –location=BRXX0232 –datatype=DW –startday=3 –shortweekday} ${alignc -64}${execpi 600 conkyForecast –location=BRXX0232 –datatype=DW –startday=4 –shortweekday}
    ${voffset 0}${alignc 75}${font ConkyWeather:size=28}${execpi 600 conkyForecast –location=BRXX0232 –datatype=WF –startday=1 –endday=4 –spaces=1}${font}
    ${voffset 0}${font DejaVu Sans:size=7}${alignc 48}${execpi 600 conkyForecast –location=BRXX0232 –datatype=HT –startday=1 –hideunits –centeredwidth=3}/${execpi 600 conkyForecast –location=BRXX0232 –datatype=LT –startday=1 –hideunits –centeredwidth=3} ${alignc -14}${execpi 600 conkyForecast –location=BRXX0232 –datatype=HT –startday=2 –hideunits –centeredwidth=3}/${execpi 600 conkyForecast –location=BRXX0232 –datatype=LT –startday=2 –hideunits –centeredwidth=3} ${alignc -40}${execpi 600 conkyForecast –location=BRXX0232 –datatype=HT –startday=3 –hideunits –centeredwidth=3}/${execpi 600 conkyForecast –location=BRXX0232 –datatype=LT –startday=3 –hideunits –centeredwidth=3} ${alignr 6}${execpi 600 conkyForecast –location=BRXX0232 –datatype=HT –startday=4 –hideunits –centeredwidth=3}/${execpi 600 conkyForecast –location=BRXX0232 –datatype=LT –startday=4 –hideunits –centeredwidth=3}${font}
    ${voffset 0}Wind: ${alignr}${execi 600 conkyForecast –location=BRXX0232 –datatype=WS}
    ${voffset 0}Humidity: ${alignr}${execi 600 conkyForecast –location=BRXX0232 –datatype=HM}

width="625"

Woodbuntu V2.66

  • Página do Ambiente de Trabalho
  • Autor: Roger Braga
  • Sistema Operativo: Ubuntu 11.04 (Natty Narwhal)
  • Tema: WoodenHead
  • Ícones: Antique
  • Wallpaper: http://img713.imageshack.us/img713/5516 … kore31.jpg
  • Outros:Screenlets
  • AWN;
  • Cursor: Azenis-Orange;
  • Covergloobus: Dimage 1;
  • Conky;
    conkyrc

    Código: Selecionar todos
      total_run_times 0
    background no                       
    cpu_avg_samples 1
    net_avg_samples 2double_buffer yes
    no_buffers yes
    text_buffer_size 1024out_to_console no
    update_interval 1alignment tlminimum_size 1100 100
    maximum_width 1100gap_x 10
    gap_y 10draw_shades no
    draw_outline no
    draw_borders no
    border_width 1
    border_inner_margin 1own_window yes
    own_window_type override
    own_window_transparent yes

    use_xft yes
    xftalpha .1
    override_utf8_locale yes
    uppercase no
    use_spacer right

    xftfont saxMono:size=9

    default_bar_size 82 3
    stippled_borders 3

    default_color FFFFFF
    default_shade_color 333333
    default_outline_color black

    color1 D6D6D6
    color2 40CEFF
    color3 424242
    color4 424242
    color5 ffffff
    color6 cccccc
    color7 363636

    short_units yes
    pad_percents 2

    TEXT
    ${color7}${font Yonna :pixelsize=40}RAM: ${font Yonna :pixelsize=26}${mem}${font}
    ${voffset -36}${goto 170}${color7}${font Yonna :pixelsize=40}CPU: ${font Yonna :pixelsize=26}${cpu cpu0}%
    ${voffset -40}${goto 325}${color7}${font Yonna :pixelsize=40}Uptime: ${font Yonna :pixelsize=26}${uptime}
    ${voffset -40}${goto 615}${color7}${font Yonna :pixelsize=40}ETH: ${font Yonna :pixelsize=26}${upspeed eth0}
    ${voffset -40}${goto 765}${color7}${font Yonna :pixelsize=40}CLOCK: ${font Yonna :pixelsize=26}${time %H:%M:%S}
    ${voffset -40}${goto 995}${color7}${font Yonna :pixelsize=40}HD: ${font Yonna :pixelsize=26}${fs_used_perc /}%${alignr}${fs_size /}
    ${font Yonna :pixelsize=46}${alignc}${time %A %d %B %Y}

Charger By Roger

width="625"

Somniu

width="625"

Fido

  • Página do Ambiente de Trabalho
  • Autor: Roger Braga
  • Sistema Operativo: Ubuntu 11.04 (Natty Narwhal)
  • Tema: unitary night
  • Ícones: Drakfire Ultra White
  • Wallpaper: http://img641.imageshack.us/img641/1702 … esuper.jpg
  • AWN;
  • Covergloobus: Elegante;
  • Conky;
    conkyrc

    Código: Selecionar todos
    #Fonctionnement de conky
    total_run_times 0            #Temps en secondes ; 0 = toujours actif
    background yes            #Pour que conky tourne en arrière plan ; no = pour les tests
    #Réglages système
    cpu_avg_samples 1            #Nb d’échantillons pour calculer la moyenne d’utilisation CPU
    net_avg_samples 2            #Nb d’échantillons pour calculer la moyenne d’utilisation CPU#Mémoire
    double_buffer yes            #Éviter le clignotement
    no_buffers yes            #Soustraire les mémoires tampons de la mémoire utilisée
    text_buffer_size 1024            #Taille du cache pour le texte#Affichage
    out_to_console no            #Affiche le texte sur la sortie standard
    update_interval 1            #Taux de rafraîchissement de la fenêtre (s)#Fenêtre conky
    alignment top_left            #Alignement
    #—
    minimum_size 400 10            #Taille minimum (px) ; largeur / hauteur
    maximum_width 400            #Largeur maximum (px)
    #—
    gap_x 600                #Écart avec le bord gauche / droit
    gap_y 200                #Écart avec le bord haut / bas
    #—
    draw_shades no            #Afficher les ombres
    draw_outline no            #Afficher les contours de fenêtre
    draw_borders no            #Afficher des contours autour des blocs de texte
    border_width 1            #Largeur du contour
    border_inner_margin 1            #Largeur des marges
    #—
    own_window yes            #Utiliser sa propre fenêtre
    own_window_type override         #Type de fenêtre ; normal / override / desktop
    own_window_transparent yes        #Pseudo transparence#Mise en forme
    use_xft yes                #Utiliser Xft (polices lissées etc)
    xftalpha .1                #Utiliser Xft
    override_utf8_locale yes         #Force l’UTF8
    uppercase no                #Tout le texte en majuscule
    use_spacer right            #Ajoute des espaces après certains objets (qu’avec des polices fixes)
    #—
    xftfont saxMono:size=9         #Police par défaut
    #—
    default_bar_size 46 3            #Barre par défaut (longeur hauteur)
    stippled_borders 5            #Taille des pointillés#Couleurs
    default_color FFFFFF             #Couleur par défaut
    default_shade_color 333333        #Couleur des ombres
    default_outline_color black        #Couleur des contours
    #—
    color1 121212                #Gris
    color2 000000                #Argenté
    color3 E8E8E8                #Vert#—
    short_units yes            #Unités courtes
    pad_percents 2            #Unité à 2 décimales#Prise en charge du LUA
    lua_load /home/roger/.conky/scripts/clock5.lua
    lua_draw_hook_pre clock_rings

    TEXT
    ${color2}${offset 86}${cpugraph cpu6 30,1}${voffset -1}${cpugraph cpu6 0,50}
    ${voffset -40}${offset 140}${font Digital\-7:size=20}${time %H %M %S}${color1}${offset -96} :     :${font}${color2}
    ${voffset -5}${offset 140}${cpugraph cpu6 0,96}
    ${voffset -11}${offset 234}${cpugraph cpu6 30,1}${voffset 29}${cpugraph cpu6 0,146}
    ${voffset -53}${font saxMono:size=8}${goto 264}${exec date +%B | sed ‘s/^./\U&/g’}${color1}${goto 360}${time %Y}

    ${color1}${execp ncal -C -h | sed ’1d ; s/^/ /g ; s/$/ /g ; s/’” $(date +%e)”‘/\${color2}’” $(date +%e)”‘\${color1}/1 ; s/^/\${goto 258}/g’}${color2}

    ${offset 264}Uptime   ${color1}${uptime}${color2}
    ${voffset -109}${offset 234}${cpugraph cpu6 109,1}${voffset 108}${cpugraph cpu6 0,146}${voffset -315}

    clock5.lua

    Código: Selecionar todos
    --[[
    Clock Rings by londonali1010 (2009)
    This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement near the end of the script uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num > 5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num > 3; conversely if you update Conky every 0.5s, you should use update_num > 10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
    lua_load ~/scripts/clock_rings-v1.1.1.lua
    lua_draw_hook_pre clock_ringsChangelog:
    + v1.1.1 -- Fixed minor bug that caused the script to crash if conky_parse() returns a nil value (20.10.2009)
    + v1.1 -- Added colour option for clock hands (07.10.2009)
    + v1.0 -- Original release (30.09.2009)
    ]]settings_table = {
    --Anneau des heures
    {
    name='time',
    arg='%I.%M',
    max=12,
    bg_colour=0x121212,
    bg_alpha=0.1,
    fg_colour=0xE8E8E8,
    fg_alpha=0.2,
    x=90, y=95,
    radius=60,
    thickness=5,
    start_angle=0,
    end_angle=360
    },
    --Anneau des minutes
    {
    name='time',
    arg='%M.%S',
    max=60,
    bg_colour=0x121212,
    bg_alpha=0.1,
    fg_colour=0xE8E8E8,
    fg_alpha=0.4,
    x=90, y=95,
    radius=66,
    thickness=5,
    start_angle=0,
    end_angle=360
    },
    --Anneau des secondes
    {
    name='time',
    arg='%S',
    max=60,
    bg_colour=0x121212,
    bg_alpha=0.1,
    fg_colour=0xE8E8E8,
    fg_alpha=0.6,
    x=90, y=95,
    radius=72,
    thickness=5,
    start_angle=0,
    end_angle=360
    },
    }--Use these settings to define the origin and extent of your clock.
    clock_r=67--Coordinates of the centre of the clock, in pixels, from the top left of the Conky window.
    clock_x=90
    clock_y=95--Colour & alpha of the clock hands
    clock_colour=0x121212
    clock_alpha=0.8

    --Show the seconds hand ?
    show_seconds=true

    require 'cairo'

    function rgb_to_r_g_b(colour,alpha)
    return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
    end

    function draw_ring(cr,t,pt)
    local w,h=conky_window.width,conky_window.height

    local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
    local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

    local angle_0=sa*(2*math.pi/360)-math.pi/2
    local angle_f=ea*(2*math.pi/360)-math.pi/2
    local t_arc=t*(angle_f-angle_0)

    --Draw background ring
    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
    cairo_set_line_width(cr,ring_w)
    cairo_stroke(cr)

    --Draw indicator ring
    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
    cairo_stroke(cr)
    end

    function draw_clock_hands(cr,xc,yc)
    local secs,mins,hours,secs_arc,mins_arc,hours_arc
    local xh,yh,xm,ym,xs,ys

    secs=os.date("%S")
    mins=os.date("%M")
    hours=os.date("%I")

    secs_arc=(2*math.pi/60)*secs
    mins_arc=(2*math.pi/60)*mins+secs_arc/60
    hours_arc=(2*math.pi/12)*hours+mins_arc/12

    --Draw hour hand
    xh=xc+0.9*clock_r*math.sin(hours_arc)
    yh=yc-0.9*clock_r*math.cos(hours_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xh,yh)
    --
    cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
    cairo_set_line_width(cr,5)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(clock_colour,clock_alpha))
    cairo_stroke(cr)

    --Draw minute hand
    xm=xc+clock_r*math.sin(mins_arc)
    ym=yc-clock_r*math.cos(mins_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xm,ym)
    --
    cairo_set_line_width(cr,3)
    cairo_stroke(cr)

    -- Draw seconds hand
    if show_seconds then
    xs=xc+1.1*clock_r*math.sin(secs_arc)
    ys=yc-1.1*clock_r*math.cos(secs_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xs,ys)
    --
    cairo_set_line_width(cr,1)
    cairo_stroke(cr)
    end
    end

    function conky_clock_rings()
    local function setup_rings(cr,pt)
    local str=''
    local value=0

    str=string.format('${%s %s}',pt['name'],pt['arg'])
    str=conky_parse(str)

    value=tonumber(str)
    if value == nil then value = 0 end

    --Les ajouts suivants permettent de corriger le retard prit par les anneaux
    --Ajout wlourf : conversion des minutes en centièmes d'heures
    if pt['arg'] == "%I.%M"  then
    value=os.date("%I")+os.date("%M")/60
    if value>12 then value=value-12 end
    end

    --Ajout Fenouille84 : conversion des secondes en centièmes de minutes
    if pt['arg'] == "%M.%S"  then
    value=os.date("%M")+os.date("%S")/60
    end
    --Fin ajout

    pct=value/pt['max']
    draw_ring(cr,pct,pt)
    end

    --Check that Conky has been running for at least 5s
    if conky_window==nil then return end
    local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)

    local cr=cairo_create(cs)

    local updates=conky_parse('${updates}')
    update_num=tonumber(updates)

    if update_num>5 then
    for i in pairs(settings_table) do
    setup_rings(cr,settings_table[i])
    end
    end

    draw_clock_hands(cr,clock_x,clock_y)
    end

width="625"

Ubuntu Blue

width="625"

Hard Rock CafÈ

width="625"

Snow Sexy

width="625"

Bubbles

width="407"

Mosca Na Caveira

width="312"width="312"
width="312"width="312"

Ubuntu Pink Lxde

Black Suit

width="625"

Blackopal64

  • Página do Ambiente de Trabalho
  • Autor: Roger Braga
  • Sistema Operativo: Ubuntu 11.04 (Natty Narwhal)
  • Tema: GnomishDark
  • Ícones: AwOken
  • Wallpaper: http://img848.imageshack.us/img848/935/ozunity.png
  • AWN;
  • Cursor: BW3D;
  • Conky;
    conkyrc

    Código: Selecionar todos
    # — Conky settings — #
    background no
    update_interval 1
    gap_x 0
    gap_y 0cpu_avg_samples 2
    net_avg_samples 2override_utf8_locale yesdouble_buffer yes
    no_buffers yestext_buffer_size 2048
    imlib_cache_size 0temperature_unit fahrenheit# — Window specifications — #own_window yes
    own_window_type override
    own_window_transparent yes
    own_window_hints undecorated,sticky,skip_taskbar,skip_pager,below

    border_inner_margin 0
    border_outer_margin 0

    minimum_size 984 50
    maximum_width 784

    alignment tr
    gap_x 10
    gap_y 40

    # — Graphics settings — #
    draw_shades no
    draw_outline no
    draw_borders no
    draw_graph_borders no

    # — Text settings — #
    use_xft yes
    xftfont caviar dreams:size=8
    xftalpha 0.5

    uppercase yes

    own_window_transparent yes

    default_color BEBEBE

    # — Lua Load — #
    lua_load ./.conky/scripts/clock_rings1.lua
    lua_draw_hook_pre clock_rings

    TEXT

    ${voffset 8}${color BEBEBE}${font Prototype:size=16}${time %A}${font}${voffset -8}${goto 120}${color BEBEBE}${font Prototype:size=32}${time %d}${font}
    ${color BEBEBE}${voffset -10}${color D3D3D3}${font Prototype:size=18}${time %b}${font}${voffset -3} ${color BEBEBE}${font Prototype:size=20}${time %Y}${font}${color D3D3D3}${font Prototype}${hr}
    ${color BEBEBE}${font Prototype:size=8}${voffset -80}${goto 590}Distro: ${exec lsb_release -d -s} (${exec lsb_release -c -s})${font Prototype:size=8}
    ${goto 590}${font Prototype:size=8}${voffset 0}Kernel: $kernel $machine${font Prototype}
    ${goto 590}${font Prototype:size=8}${voffset 0}Uptime: $uptime_short${font Prototype}
    ${color BEBEBE}${goto 190}${voffset -30}${downspeedf eth0}
    ${color BEBEBE}${goto 190}${voffset -7}${upspeedf eth0}
    ${color D3D3D3}${goto 217}${voffset -55}net
    ${color BEBEBE}${goto 290}${voffset 2}${cpu cpu0}%
    ${color BEBEBE}${goto 290}${voffset -7}${cpu cpu1}%
    ${color D3D3D3}${goto 317}${voffset -55}cpu
    ${color BEBEBE}${goto 390}${voffset 2}${memperc}%
    ${color BEBEBE}${goto 390}${voffset -7}${swapperc}%
    ${color D3D3D3}${goto 412}${voffset -55}mem
    ${color BEBEBE}${goto 490}${voffset 2}${fs_used_perc /}%
    ${color BEBEBE}${goto 490}${voffset -7}${fs_used_perc /home/}%
    ${color D3D3D3}${goto 514}${voffset -55}hdd

     

    clock_rings1.lua

    Código: Selecionar todos
    --[[
    Clock Rings by londonali1010 (2009) Edited by AleAngel
    This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num>5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num>3; conversely if you update Conky every 0.5s, you should use update_num>10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
    lua_load ~/scripts/clock_rings.lua
    lua_draw_hook_pre clock_ringsChangelog:
    + v1.0 -- Original release (30.09.2009)
    v1.1p -- jpope edit (05.10.2009)
    v1.2p -- jpope edit (06.10.2009)
    v1.3p -- jpope edit (10.10.2009)
    ]]settings_table = {
    {
    -- Edit this table to customise your rings.
    -- You can create more rings simply by adding more elements to settings_table.
    -- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
    name='time',
    -- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
    arg='%I.%M',
    -- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
    max=12,
    -- "bg_colour" is the colour of the base ring.
    bg_colour=0x9400D3,
    -- "bg_alpha" is the alpha value of the base ring.
    bg_alpha=0.2,
    -- "fg_colour" is the colour of the indicator part of the ring.
    fg_colour=0x9400D3,
    -- "fg_alpha" is the alpha value of the indicator part of the ring.
    fg_alpha=0.2,
    -- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
    x=600, y=210,
    -- "radius" is the radius of the ring.
    radius=52,
    -- "thickness" is the thickness of the ring, centred around the radius.
    thickness=10,
    -- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
    start_angle=0,
    -- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
    end_angle=360
    },
    {
    name='time',
    arg='%M.%S',
    max=60,
    bg_colour=0x9400D3,
    bg_alpha=0.2,
    fg_colour=0xBEBEBE,
    fg_alpha=0.4,
    x=600, y=210,
    radius=64,
    thickness=10,
    start_angle=0,
    end_angle=360
    },
    {
    name='time',
    arg='%S',
    max=60,
    bg_colour=0x9400D3,
    bg_alpha=0.2,
    fg_colour=0xBEBEBE,
    fg_alpha=0.6,
    x=600, y=210,
    radius=76,
    thickness=10,
    start_angle=0,
    end_angle=360
    },
    {
    name='time',
    arg='%d',
    max=31,
    bg_colour=0x9400D3,
    bg_alpha=0.2,
    fg_colour=0xBEBEBE,
    fg_alpha=0.8,
    x=600, y=210,
    radius=88,
    thickness=10,
    start_angle=-90,
    end_angle=89
    },
    {
    name='time',
    arg='%m',
    max=12,
    bg_colour=0x9400D3,
    bg_alpha=0.2,
    fg_colour=0xBEBEBE,
    fg_alpha=1,
    x=600, y=210,
    radius=100,
    thickness=10,
    start_angle=-90,
    end_angle=89
    },
    {
    name='time',
    arg='%w',
    max=6,
    bg_colour=0x9400D3,
    bg_alpha=0.2,
    fg_colour=0xBEBEBE,
    fg_alpha=0.8,
    x=600, y=210,
    radius=88,
    thickness=10,
    start_angle=90,
    end_angle=269
    },
    {
    name='time',
    arg='%U',
    max=52,
    bg_colour=0x9400D3,
    bg_alpha=0.2,
    fg_colour=0xBEBEBE,
    fg_alpha=1,
    x=600, y=210,
    radius=100,
    thickness=10,
    start_angle=90,
    end_angle=269
    },
    {
    name='downspeedf',
    arg='eth0',
    max=100,
    bg_colour=0x9400D3,
    bg_alpha=0.2,
    fg_colour=0xBEBEBE,
    fg_alpha=0.6,
    x=230, y=45,
    radius=35,
    thickness=10,
    start_angle=-90,
    end_angle=180
    },
    {
    name='upspeedf',
    arg='eth0',
    max=100,
    bg_colour=0x9400D3,
    bg_alpha=0.2,
    fg_colour=0xBEBEBE,
    fg_alpha=0.3,
    x=230, y=45,
    radius=23,
    thickness=10,
    start_angle=-90,
    end_angle=180
    },
    {
    name='cpu',
    arg='cpu0',
    max=100,
    bg_colour=0x9400D3,
    bg_alpha=0.2,
    fg_colour=0xBEBEBE,
    fg_alpha=0.6,
    x=330, y=45,
    radius=35,
    thickness=10,
    start_angle=-90,
    end_angle=180
    },
    {
    name='cpu',
    arg='cpu1',
    max=100,
    bg_colour=0x9400D3,
    bg_alpha=0.2,
    fg_colour=0xBEBEBE,
    fg_alpha=0.3,
    x=330, y=45,
    radius=23,
    thickness=10,
    start_angle=-90,
    end_angle=180
    },{
    name='memperc',
    arg='',
    max=100,
    bg_colour=0x9400D3,
    bg_alpha=0.2,
    fg_colour=0xBEBEBE,
    fg_alpha=0.6,
    x=430, y=45,
    radius=35,
    thickness=10,
    start_angle=-90,
    end_angle=180
    },
    {
    name='swapperc',
    arg='',
    max=100,
    bg_colour=0x9400D3,
    bg_alpha=0.2,
    fg_colour=0xBEBEBE,
    fg_alpha=0.4,
    x=430, y=45,
    radius=23,
    thickness=10,
    start_angle=-90,
    end_angle=180
    },
    {
    name='fs_used_perc',
    arg='/',
    max=100,
    bg_colour=0x9400D3,
    bg_alpha=0.2,
    fg_colour=0xBEBEBE,
    fg_alpha=0.6,
    x=530, y=45,
    radius=35,
    thickness=10,
    start_angle=-90,
    end_angle=180
    },
    {
    name='fs_used_perc',
    arg='/home/',
    max=100,
    bg_colour=0x9400D3,
    bg_alpha=0.2,
    fg_colour=0xBEBEBE,
    fg_alpha=0.3,
    x=530, y=45,
    radius=23,
    thickness=10,
    start_angle=-90,
    end_angle=180
    },}-- Use these settings to define the origin and extent of your clock.

    clock_r=100

    -- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.

    clock_x=600
    clock_y=210

    show_seconds=true

    require 'cairo'

    function rgb_to_r_g_b(colour,alpha)
    return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
    end

    function draw_ring(cr,t,pt)
    local w,h=conky_window.width,conky_window.height

    local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
    local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

    local angle_0=sa*(2*math.pi/360)-math.pi/2
    local angle_f=ea*(2*math.pi/360)-math.pi/2
    local t_arc=t*(angle_f-angle_0)

    -- Draw background ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
    cairo_set_line_width(cr,ring_w)
    cairo_stroke(cr)

    -- Draw indicator ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
    cairo_stroke(cr)
    end

    function draw_clock_hands(cr,xc,yc)
    local secs,mins,hours,secs_arc,mins_arc,hours_arc
    local xh,yh,xm,ym,xs,ys

    secs=os.date("%S")
    mins=os.date("%M")
    hours=os.date("%I")

    secs_arc=(2*math.pi/60)*secs
    mins_arc=(2*math.pi/60)*mins+secs_arc/60
    hours_arc=(2*math.pi/12)*hours+mins_arc/12

    -- Draw hour hand

    xh=xc+0.7*clock_r*math.sin(hours_arc)
    yh=yc-0.7*clock_r*math.cos(hours_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xh,yh)

    cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
    cairo_set_line_width(cr,5)
    cairo_set_source_rgba(cr,0.2,0.6,1,0.4)
    cairo_stroke(cr)

    -- Draw minute hand

    xm=xc+clock_r*math.sin(mins_arc)
    ym=yc-clock_r*math.cos(mins_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xm,ym)

    cairo_set_line_width(cr,3)
    cairo_stroke(cr)

    -- Draw seconds hand

    if show_seconds then
    xs=xc+clock_r*math.sin(secs_arc)
    ys=yc-clock_r*math.cos(secs_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xs,ys)

    cairo_set_line_width(cr,1)
    cairo_stroke(cr)
    end
    end

    function conky_clock_rings()
    local function setup_rings(cr,pt)
    local str=''
    local value=0

    str=string.format('${%s %s}',pt['name'],pt['arg'])
    str=conky_parse(str)

    value=tonumber(str)
    pct=value/pt['max']

    draw_ring(cr,pct,pt)
    end

    -- Check that Conky has been running for at least 5s

    if conky_window==nil then return end
    local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)

    local cr=cairo_create(cs)

    local updates=conky_parse('${updates}')
    update_num=tonumber(updates)

    if update_num>5 then
    for i in pairs(settings_table) do
    setup_rings(cr,settings_table[i])
    end
    end

    draw_clock_hands(cr,clock_x,clock_y)
    end

    function inca_draw_shadow(cr, radius, color, strength, radiusstart)
    local alpha = strength / radius
    cairo_set_source_rgba(cr, inca_rgb(color, alpha))
    cairo_set_line_join(cr, CAIRO_LINE_JOIN_ROUND)
    cairo_set_line_cap(cr, CAIRO_LINE_CAP_ROUND)
    local w, radiusstart = 0, radiusstart
    if radiusstart     ~= nil and radiusstart > 1 then
    radius = radius + radiusstart
    else
    radiusstart = 1
    end
    for w=radiusstart,radius,1 do
    cairo_set_line_width(cr, w)
    cairo_stroke_preserve(cr)
    end
    end

    function inca_draw_ring(cr, x, y, radius, width, ring)
    local value,valuemax = ring['value'], ring['valuemax']
    local angle1,angle2,angle3 = ring['angle1'], ring['angle2'], 0
    local color,alpha = settings['fgcolor'], ring['alpha']
    local alphasd = 0.3

    if ring['isparsable'] == true then
    value = conky_parse(value)
    if value == nil then return end
    value = tonumber(value)/valuemax
    value = math.max(0, math.min(1, value))
    else
    value = 1
    alphasd = 1
    color = settings['bgcolor']
    end
    angle3 = (angle2 - angle1)*value + angle1
    cairo_arc_negative(cr, x, y, radius, angle1*math.pi/180, angle3*math.pi/180)
    inca_draw_shadow(cr, 5, 0x000000, 0.60*alphasd, width + 1)
    cairo_set_source_rgba(cr, inca_rgb(color,alpha))
    cairo_set_line_width(cr, width)
    cairo_stroke(cr)
    end

    function inca_draw_line(cr, x1, y1, x2, y2, width, line)
    local value,valuemax = line['value'], line['valuemax']
    local color,alpha = settings['fgcolor'], line['alpha']
    local alphasd = 0.3

    if line['isparsable'] == true then
    value = conky_parse(value)
    if value == nil then return end
    value = tonumber(value)/valuemax
    value = math.max(0, math.min(1, value))
    else
    value = 1
    alphasd = 1
    color = settings['bgcolor']
    end
    local x = (1 - value)/2
    cairo_move_to(cr, x1 + x2*x, y1 + y2*x)
    cairo_rel_line_to(cr, x2*(1-x*2), y2*(1-x*2))
    cairo_close_path (cr)
    inca_draw_shadow(cr, 5, 0x000000, 0.60*alphasd, width + 1)
    cairo_set_source_rgba(cr, inca_rgb(color, alpha))
    cairo_set_line_width(cr, width)
    cairo_stroke(cr)
    end

    function inca_draw_job(cr, job)
    if job['job'] == 'text' then
    cairo_select_font_face(cr, job.font, CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_BOLD)
    cairo_set_font_size(cr, job.size)
    cairo_move_to(cr, job['x'], job['y'])
    local str = job['str']
    if job['isparsable'] == true then
    str = conky_parse(str)
    if str == nil then return end
    end
    if job['isformatable'] ~= nil and job['isformatable'] == true then
    str = string.format(job['fmt'], str)
    end
    cairo_text_path(cr, str)
    inca_draw_shadow(cr, 5, 0x000000, 0.65)
    cairo_set_source_rgba(cr, inca_rgb(settings['fgcolor'], 1))
    cairo_fill(cr)
    elseif job['job'] == 'ring' then
    local x,y,radius = job['x'], job['y'], job['radius']
    local layers,width = job['layers'], job['width']
    for i in pairs(layers) do
    inca_draw_ring(cr, x, y, radius, width, layers[i])
    end
    elseif job['job'] == 'line' then
    local x1,y1,x2,y2 = job['x1'], job['y1'], job['x2'], job['y2']
    local layers,width = job['layers'], job['width']
    for i in pairs(layers) do
    inca_draw_line(cr, x1, y1, x2, y2, width, layers[i])
    end
    end
    end

    function conky_paint()
    if conky_window == nil then return end
    local cs = cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
    local cr = cairo_create(cs)
    for i in pairs(jobs) do
    inca_draw_job(cr, jobs[i])
    end
    end

width="625"

Naruto

width="625"

Ubuntu 11.10 Gnome Shell

Oldskool

width="625"

Elegant Brit New Version

width="625"

Debian_Orb_Metal

width="625"

Dragon Blue

width="625"

Blue Gtk

width="625"

Photographia

width="625"

Knight 11.04

  • Página do Ambiente de Trabalho
  • Autor: Roger Braga
  • Sistema Operativo: Ubuntu 11.04 (Natty Narwhal)
  • Tema: Blue Carbonite
  • Ícones: Slipper 0.5
  • Wallpaper: http://img831.imageshack.us/img831/5899 ... kore31.jpg
  • AWN;
  • Cursor: Vienna;
  • Covergloobus: Teac;
  • Conky;
    conkyrc

    Código: Selecionar todos
    use_xft yes
    xftfont Sans:size=8
    override_utf8_locale yes
    text_buffer_size 384
    background yes
    update_interval 1
    total_run_times 0
    own_window yes
    own_window_type override
    own_window_transparent yes
    imlib_cache_size 0
    double_buffer yes
    draw_shades no
    draw_outline no
    draw_borders no
    draw_graph_borders yes
    out_to_ncurses no
    out_to_console no
    alignment bl
    minimum_size 240 0
    maximum_width 490
    gap_x 10
    gap_y 100
    short_units yes
    pad_percents 0
    border_inner_margin 4
    top_name_width 6
    no_buffers yes
    uppercase no
    cpu_avg_samples 2
    net_avg_samples 2
    use_spacer left
    ####
    ## Colors
    #
    color1 Grey        ##icons
    color2 Ivory       ##text
    color3 323232    ##divider lines
    color4 FFEC8B        ##headings
    color5 bfff80##TEXT
    ${font  Hawaii Lover:size=20}   ${color3}  ${time %e %B %G}
    ${font Hawaii Lover:size=40}   ${color3}${time %H}:${time %M}:${time %S}
    ${font HandelGotD:bold:size=8}${color4}Weather${color3}$font
    ${voffset 5}${alignr 170}${font ConkyWeather:size=45}${execpi 900 conkyForecast --location=BRXX0232 --datatype=WF}${font}${alignr 110}${voffset -40} ${font ConkyWindNESW:normal:size=40}${execpi 900 conkyForecast --location=BRXX0232 --datatype=BS}${font}
    ${alignr 50}${voffset -46}${font moon phases:size=32}${execpi 900 conkyForecast --location=BRXX0232 --datatype=MF}$font
    ${voffset 10}${execi 900 conkyForecast --location=BRXX0232 --datatype=CT}${alignr}${color4} ${execpi 900 conkyForecast --location=BRXX0232 --datatype=HT}${color3}
    Humidity:${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=HM}${color3}
    Precipitation Chance: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=PC --startday=0}${color3}
    Wind Directon: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=WD}${color3}
    Wind Angle: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=WA}${color3}
    Wind Speed: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=WS}${color3}
    Wind Gusts: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=WG}${color3}
    Barometer: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=BR}${color3}
    Barometer Description: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=BD}${color3}
    Visibility: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=VI}${color3}
    Dew Point: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=DP}${color3}
    UV Text: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=UT}${color3}
    SunRise: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=SR}${color3}
    DayLight: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=DL}${color3}
    SunSet: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=SS}${color3}
    Moon Phase: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=MP}${color3}
    City Name: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=CN}${color3}
    Country: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=CO}${color3}
    Last Update: ${alignr}${color4}${execpi 900 conkyForecast --location=BRXX0232 --datatype=LU}${color3}
    ${font HandelGotD:bold:size=8}${color4}Forecast${font}${color3}
    ${voffset 5}${execi 900 conkyForecast --location=BRXX0232 --datatype=DW --shortweekday --startday=1 --endday=4 --spaces=14}
    ${font ConkyWeather:size=32}${execi 900 conkyForecast --location=BRXX0232 --datatype=WF --startday=1 --endday=4 --spaces=1}${font}
    ${execi 900 conkyForecast --location=BRXX0232 --datatype=HT --startday=1 --endday=4 --spaces=10}

Rbr

  • Página do Ambiente de Trabalho
  • Autor: Roger Braga
  • Sistema Operativo: Ubuntu 11.04 (Natty Narwhal)
  • Tema: HumanGraphite 0.0
  • Ícones: LaGaDesk-BlackWhite-III
  • Wallpaper: http://img35.imageshack.us/img35/5872/k ... bylali.png
  • AWN;
  • Conky;
    conkyrc

    Código: Selecionar todos
    ##############################################
    ## Settings ##################################
    ##############################################
    background yes
    use_xft yes
    xftfont Verdana:size=7
    xftalpha 1
    update_interval 6.0
    total_run_times 0
    own_window yes
    own_window_transparent yes
    own_window_type normal
    own_window_argb_visual yes
    own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
    double_buffer yes
    minimum_size 700
    maximum_width 1180
    draw_shades no
    draw_outline no
    draw_borders no
    draw_graph_borders yes
    default_color 000000
    default_shade_color bdb383
    default_outline_color 666666
    alignment bottom_left
    gap_x 5
    gap_y 45
    no_buffers yes
    uppercase no
    cpu_avg_samples 2
    override_utf8_locale no
    ##############################################
    #  Output ####################################
    ##############################################
    ### CPU graph not necessary ${cpugraph cpu0}
    ### Unused ethernet code
    #Up: ${upspeed eth2} kb/s     ethernet$color${alignr}${upspeedgraph eth2 8,70 99CCFF 6666FF}
    #Down: ${downspeed eth2} kb/s ${alignr}${downspeedgraph eth2 8,70 99CCFF 6666FF}
    #Upload: ${alignr}${totalup eth2}
    #Download: ${alignr}${totaldown eth2}
    #IP/GW: ${alignr}${addr eth2} / ${gw_ip}${else}${if_existing /proc/net/ ath0}
    ### Small 1-line Network Upload/Download graphs
    #Down: ${downspeed eth0} kb/s ${alignr}${downspeedgraph eth0 8,60 ffffff A39AF1}
    #Up: ${upspeed eth0} kb/s ${alignr}${upspeedgraph eth0 8,60 ffffff A39AF1}
    ### FS Bars
    #${fs_bar 8,60 ffffff A39AF1 /}
    #${swapbar}
    ### Large Net u/d
    # Down: ${downspeed eth2} kb/s ${alignr}Up: ${upspeed eth2} kb/s
    # ${downspeedgraph eth2 25,100} ${alignr}${upspeedgraph eth2 25,100}
    ### Node
    # $sysname $kernel $alignr $machine
    ### Time${color cccccc}
    #${alignc 19}${font Arial Black:size=14}${time %H:%M}${font}
    #${voffset 2}${alignc}${time %A, %d %B %Y}
    ### now in conkybrc
    TEXT
    ${font Arial Black:size=34}${time %H:%M}${font} ${goto 170}${time %a %d %b} ${goto 340}sys${goto 360}proc | $processes ($running_processes)${goto 455}pid${goto 495}cpu${goto 535}mem${goto 580}mocp
    ${hr}
    w ${goto 20} ${addr eth0} ${goto 170}${wireless_essid eth0} | ${wireless_link_qual_perc eth0}% ${goto 340}${top name 1}${goto 450}${top pid 1}${goto 490}${top cpu 1}${goto 530}${top mem 1}${goto 580}Time: ${if_running mocp}${execpi 3mocp -Q %tl} / ${execpi 1 mocp -Q %tt}${else}...${endif}
    ${goto 170}dn: ${downspeed eth0} ${goto 240}up: ${upspeed eth0} ${goto 340}${top name 2}${goto 450}${top pid 2}${goto 490}${top cpu 2}${goto 530}${top mem 1}${goto 580}Song: ${if_running mocp}${execpi 3 mocp -Q %song}${else}...${endif}
    e ${goto 20} ${addr eth0} ${goto 170}${gw_ip} ${goto 340}${top name 2}${goto 450}${top pid 3}${goto 490}${top cpu 3}${goto 530}${top mem 3}${goto 580}Artist: ${if_running mocp}${execpi 3 mocp -Q %artist}${else}...${endif}
    ${goto 170} dn: ${downspeed eth0} ${goto 240}up: ${upspeed eth0} ${goto 340}${top name 4}${goto 450}${top pid 4}${goto 490}${top cpu 4}${goto 530}${top mem 4}${goto 580}Album: ${if_running mocp}${execpi 3 mocp -Q %album}${else}...${endif}
    ${hr}
    $nodename ${goto 40}                                     $uptime  | ${freq_g 0}Ghz ${goto 260} r: ${fs_used /} ${fs_bar 6,50 /} | h: ${fs_used /home} ${fs_bar 6,50 /home} | m: $memperc% ${membar 6,50 cccccc A39AF1} | c: ${cpu cpu0}% ${cpubar cpu0 6,50 cccccc A39AF1}

width="625"

Muphy

width="625"

Dominando O Mundo

  • Página do Ambiente de Trabalho
  • Autor: tatuiano
  • Sistema Operativo:Ubuntu 11.1o gonme-shell
  • Tema:Delta shell Orange
  • Ícones:Buuf 3.2
  • Wallpaper:
  • Outros:Tema gtk Ambiance Dark Sidebar tema da janela Salinx gtk3 v1.1

width="407"

Heavy Metal

  • Página do Ambiente de Trabalho
  • Autor: Roger Braga
  • Sistema Operativo: Ubuntu 11.04 (Natty Narwhal)
  • Tema: Minimum Suite
  • Ícones: Avalon
  • Wallpaper: http://img696.imageshack.us/img696/7168 ... cbydev.jpg
  • AWN;
  • Cursor: Cyclone;
  • Covergloobus: Coversutra;
  • Conky;
    conkyrc

    Código: Selecionar todos
    background no
    use_xft yes
    xftfont Sans:size=12
    xftalpha 0.1
    update_interval 2
    total_run_times 0
    own_window yes
    own_window_type normal
    own_window_transparent no #set to yes if not using next three lines
    own_window_argb_visual yes #sets color of panel
    own_window_colour 000000
    own_window_argb_value 20 #adjust between 0 (completely transparent) and 255 (opaque)
    own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
    double_buffer true
    minimum_size 250 5
    alignment tl
    #Gap between borders of screen and text
    gap_x 5
    gap_y 1
    no_buffers yes
    uppercase no
    override_utf8_locale yes
    color1 AntiqueWhite2
    color2 DarkSlateGray
    TEXT
    ###############
    ## Times ##
    ###############
    ${voffset -4}${if_match ${time %l}<=9}${font RadioSpace:size=32}${color1}${alignc 2}${time %l:%M%p }${else}${if_match ${time %l}>=10}${font RadioSpace:size=32}${color1}${alignc 2}${time %l:%M%p}${endif}${endif}
    ${voffset -35}${font LiberationSans:size=8}${color1}${alignc 5}Sunrise${offset 1}${execi 600 conkyForecast --location=BRXX0232 --datatype=SR --startday=1}${color1}${offset 2}|${offset 2}${color1}Sunset${offset 1}${execi 600 conkyForecast --location=BRXX0232 --datatype=SS --startday=1}#####################
    ## CALENDAR & DATE ##
    #####################
    ${color orange}${font StyleBats:bold:size=10}u${voffset -4}${goto 30}${font Arial:bold:size=10}CALENDAR ${color2}${hr 2}
    ${voffset 10}${font :bold:size=8}${color1}${goto 180}${time %A}
    ${font :bold:size=16}${goto 192}${time %d}${font}
    ${font :bold:size=10}${goto 192}${time %b}
    ${font :bold:size=8}${goto 192}${time %Y}${voffset -100}${font DejaVu Sans Mono :size=8}
    ${execpi 60 DJS=`date +%_d`; ncal -C -h | sed '1d' | sed '/./!d' | sed 's/$/ /' | fold -w 21 | sed -n '/^.\{21\}/p' | sed 's/^/ /' | sed /" $DJS "/s/" $DJS "/" "'${color orange}'"$DJS"'${color1}'" "/}######################
    ## Atmosphere ##
    ######################
    ${color orange}${font Martin Vogel's Symbols:bold:size=10}m${voffset -2}${goto 30}${font Arial:bold:size=10}ATMOSPHERE ${color2}${hr 2}
    ${voffset 3}${font Vibrocentric:italic:size=8}${color orange}${alignc}Current Forecast
    ${font Vibrocentric:size=8}${color1}${voffset 7}${goto 75}${color1}${font Weather:size=22}y${voffset -3}${alignc -5}${font RadioSpace:size=16}${color1} ${execpi 600 conkyForecast  --location=BRXX0232}
    ${voffset -10}${font LiberationSans:size=10}${color1}${alignc}${execi 600 conkyForecast --location=BRXX0232 --datatype=CT}
    ${voffset -5}${font Vibrocentric:size=8}${color1}${goto 32}${execi 600 conkyForecast --location=BRXX0232 --datatype=DW --startday=0 --shortweekday}
    ${voffset 3}${goto 20}${font ConkyWeather:size=32}${execi 600 conkyForecast --location=BRXX0232 --datatype=WF --startday=0}
    ${voffset -20}${goto 22}${font Vibrocentric:size=8}${color1}${execi 600 conkyForecast --location=BRXX0232 -- --datatype=HT --startday=0 --hideunits --centeredwidth=4 -iu}/${execi 600 conkyForecast --location=BRXX0232 -- --datatype=LT --startday=0 --hideunits --centeredwidth=4 -iu}
    #two graphics on right
    ${voffset -64}${goto 110}${font ConkyWeather:style=Bold:size=32}${color1}${execi 600 conkyForecast --location=BRXX0232 --datatype=WF}${goto 185}${voffset -6}${font ConkyWindNESW:style=Bold:size=32}${color1}${execi 600 conkyForecast --location=BRXX0232 --datatype=BS}
    #two text on right
    ${voffset -9}${goto 95}${font Vibrocentric:size=8}${color1}Feels like ${execi 600 conkyForecast --location=BRXX0232 -- --datatype=LT --centeredwidth=4 -iu}${goto 188}${execi 600 conkyForecast --location=BRXX0232 -- --datatype=WS}${font Vibrocentric:size=8}${color1}${voffset 2}Barometer: ${goto 90}${execpi 300 conkyForecast --location=BRXX0232 --datatype=BR --} (${execpi 300 conkyForecast --location=BRXX0232 --datatype=BD})
    ${voffset 2}Rain Chance:${goto 90}${execi 3600 conkyForecast --location=BRXX0232 --datatype=PC --startday=0 -iu}${goto 145}Dew Point: ${alignr}${execi 1800 conkyForecast --location=BRXX0232 --datatype=DP --}
    ${voffset 2}Humidity:${goto 90}${execpi 300 conkyForecast –location=BRXX0232 --datatype=HM}${goto 145}Visibility:${alignr}${execpi 300 conkyForecast --location=BRXX0232 --datatype=VI --}${font Vibrocentric:italic:size=8}${color orange}${alignc}Extended Forecast
    ${font Vibrocentric:size=8}${color1}${voffset 10}${goto 30}${execi 600 conkyForecast --location=BRXX0232 --datatype=DW --startday=1 --shortweekday}${goto 83}${execi 600 conkyForecast --location=BRXX0232 --datatype=DW --startday=2 --shortweekday}${goto 136}${execi 600 conkyForecast --location=BRXX0232 --datatype=DW --startday=3 --shortweekday}${goto 192}${execi 600 conkyForecast --location=BRXX0232 --datatype=DW --startday=4 --shortweekday}
    ${goto 20}${font ConkyWeather:size=32}${execi 600 conkyForecast --location=BRXX0232 --datatype=WF --startday=1 --endday=4 --spaces=1}
    ${goto 22}${voffset -30}${font Vibrocentric:size=8}${color1}${execi 600 conkyForecast --location=BRXX0232 -- --datatype=HT --startday=1 --hideunits --centeredwidth=4 -iu}/${execi 600 conkyForecast --location=BRXX0232 -- --datatype=LT --startday=1 --hideunits --centeredwidth=4 -iu}${goto 76}${execi 600 conkyForecast --location=BRXX0232 -- --datatype=HT --startday=2 --hideunits --centeredwidth=4 -iu}/${execi 600 conkyForecast --location=BRXX0232 -- --datatype=LT --startday=2 --hideunits --centeredwidth=4 -iu}${goto 130}${execi 600 conkyForecast --location=BRXX0232 -- --datatype=HT --startday=3 --hideunits --centeredwidth=4 -iu}/${execi 600 conkyForecast --location=BRXX0232 -- --datatype=LT --startday=3 --hideunits --centeredwidth=4 -iu}${goto 185}${execi 600 conkyForecast --location=BRXX0232 -- --datatype=HT --startday=4 --hideunits --centeredwidth=4 -iu}/${execi 600 conkyForecast --location=BRXX0232 -- --datatype=LT --startday=4 --hideunits --centeredwidth=4 -iu}
    ${voffset 3}${goto 34}${execi 3600 conkyForecast --location=BRXX0232 --datatype=PC --startday=1 --endday=4 --spaces=10 -iu}${color}

width="625"

Red Stell

width="625"

4 Respostas ate agora.

  1. Allan Robs diz:

    muito legal todos, quero aprender a fazer isso tambem,
    grato pela ajuda.

  2. Valeu por publicar o meu OSX Lion, obrigado!!!

Deixe uma resposta a Reinaldo Versuri


Pesquisar


Publicidade

  • Forum Do Ubuntued
  • Ubuntu Dicas
  • Ubuntu-BR-SC
  • Tomates Podres
  • Servidores com Ubuntu desde 5$ do mês
  • Anuncie no Ubuntued!