Bem-vindo: Dom, 29 de Setembro 2024, 18:17 Pesquisa avançada
por Donatello van Dijck » Ter, 15 de Novembro 2011, 13:37
por leandrolopes » Ter, 15 de Novembro 2011, 16:00
por rafaelsarilho » Ter, 15 de Novembro 2011, 17:10
por Kaverah » Qua, 16 de Novembro 2011, 0:36
por Roger Braga » Qua, 16 de Novembro 2011, 0:57
total_run_times 0
background no
cpu_avg_samples 1
net_avg_samples 2
double_buffer yes
no_buffers yes
text_buffer_size 1024
out_to_console no
update_interval 1
alignment top_right
minimum_size 600 700
maximum_width 600
gap_x -1
gap_y 20
draw_shades no
draw_outline no
draw_borders no
border_width 1
border_inner_margin 1
own_window yes
own_window_type override
own_window_class Conky
own_window_transparent yes
use_xft yes
xftalpha .1
override_utf8_locale yes
uppercase no
use_spacer right
xftfont saxMono:size=9
default_bar_size 82 3
stippled_borders 3
default_color FFFFFF
default_shade_color 333333
default_outline_color black
color1 D6D6D6
color2 40CEFF
color3 424242
color4 424242
color5 ffffff
color6 cccccc
short_units yes
pad_percents 2
#Carga LUA(CORRECT WITH YOUR PATH!!)
lua_load ~/.conky/.clock_0.lua
lua_draw_hook_pre clock_rings
TEXT
${voffset -50}
${color4}${offset 546}${voffset 150}${cpugraph cpu6 1}${voffset -3}${hr 2}
${color4}${offset 206}${voffset -14}${cpubar cpu6 1, 130}${voffset 2}
${color4}${offset 206}${voffset -10}${cpubar cpu6 10, 1}${voffset 2}
#tiempos#
${color3}${voffset -145}${offset 330}${font Impact:pixelsize=20}${time %H:%M}
${color4}${font Impact :pixelsize=20 style=bold}${voffset 60}${offset 240} Tempo
${color3}${voffset 15}${offset 160}${font Nimbus Sans L:pixelsize=10}Uptime ${voffset -11}${font Impact:pixelsize=20}$uptime
#bat#
${color4}${offset 400}${voffset 100}${cpugraph cpu6 1}${voffset -3}${hr 2}
${color4}${font Impact :pixelsize=20 style=bold}${voffset -40}${offset 470} Frequency
${color3}${offset 300}${voffset -10} ${font Impact:pixelsize=20} ${freq_g} GHz
#${color3}${font Nimbus Sans L:pixelsize=10}${offset 450}Restan ${voffset -11}${font Impact:pixelsize=20}${battery_time BAT0}
#RAM#
${color4}${offset 250}${voffset 45}${cpugraph cpu6 1}${voffset -3}${hr 2}
${color4}${offset 338}${voffset -21}${cpubar cpu6 180, 1}${voffset 2}
${color4}${font Impact :pixelsize=20 style=bold}${voffset -225}${offset 420} Performance
${color3}${voffset 10}${offset 370}${font Nimbus Sans L:pixelsize=10 style=bold} RAM ${goto 405}${voffset -11}${font Impact:pixelsize=20}$memperc%
${color3}${voffset 5}${offset 375}${font Nimbus Sans L:pixelsize=10 style=bold}${top_mem name 1}${voffset -11}${font Impact:pixelsize=20 style=bold}${goto 460}${font Impact:pixelsize=20 style=bold}${top_mem mem_res 1}${goto 520}${top_mem mem 1}%
${color3}${voffset 5}${offset 375}${font Nimbus Sans L:pixelsize=10 style=bold}${top_mem name 2}${voffset -11}${font Impact:pixelsize=20 style=bold}${goto 460}${font Impact:pixelsize=20 style=bold}${top_mem mem_res 2}${goto 520}${top_mem mem 2}%
${color3}${voffset 5}${offset 375}${font Nimbus Sans L:pixelsize=10 style=bold}${top_mem name 3}${voffset -11}${font Impact:pixelsize=20 style=bold}${goto 460}${font Impact:pixelsize=20 style=bold}${top_mem mem_res 3}${goto 520}${top_mem mem 3}%
#cpu#
${voffset -35}${offset 230}${font Nimbus Sans L:pixelsize=10 style=bold}Cpu 1 ${voffset -10}${goto 265}${font Impact:pixelsize=20}${cpu cpu1}%
${voffset 0}${offset 230}${font Nimbus Sans L:pixelsize=10 style=bold}Cpu 2 ${voffset -10}${goto 265}${font Impact:pixelsize=20}${cpu cpu2}%
#${color3}${voffset 30}${offset 200}${font Nimbus Sans L:pixelsize=10 style=bold}${top name 1}${font #Impact:pixelsize=20 style=bold}${voffset -11}${goto 260}${top cpu 1}
#${color3}${voffset -5}${offset 200}${font Nimbus Sans L:pixelsize=10 style=bold}${top name 2}${font #Impact:pixelsize=20 style=bold}${goto 520}${top cpu 2}
total_run_times 0
background no
cpu_avg_samples 1
net_avg_samples 2
double_buffer yes
no_buffers yes
text_buffer_size 1024
out_to_console no
update_interval 1
alignment top_left
minimum_size 600 700
maximum_width 600
gap_x -1
gap_y 50
draw_shades no
draw_outline no
draw_borders no
border_width 1
border_inner_margin 1
own_window yes
own_window_type override
own_window_class Conky
own_window_transparent yes
use_xft yes
xftalpha .1
override_utf8_locale yes
uppercase no
use_spacer right
xftfont saxMono:size=9
default_bar_size 82 3
stippled_borders 3
default_color FFFFFF
default_shade_color 333333
default_outline_color black
color1 D6D6D6
color2 40CEFF
color3 585858
color4 585858
color5 ffffff
short_units yes
pad_percents 2
#Carga LUA(CORRECT WITH YOUR PATH!!)
lua_load ~/.conky/.clock_1.lua
lua_draw_hook_pre clock_rings
TEXT
${color4}${voffset 78}${cpugraph cpu1 1,300}${offset -100}${voffset 1}${cpugraph cpu2 120,1}
#net wifi#
${color4}${font Impact :pixelsize=20 style=bold}${voffset -170}${offset 20} Wi-Fi ${color4}${offset 25}${addrs eth0}
${color3}${font Impact :pixelsize=20 style=bold}${voffset -26}${offset 255} ${wireless_link_qual_perc eth0}${goto 290}%
${voffset -20}${offset 20}${font Nimbus Sans L:pixelsize=10 style=bold}${if_up eth0}$color3 Activa $else $color2 WiFi Inactivo $endif
${color3}${offset 20} En la red: ${wireless_essid eth0}
#traf wifi#
${voffset 40}
${offset 25}${font Nimbus Sans L:pixelsize=10 style=bold}Descarga a ${voffset -11}${goto 90}${font Impact:pixelsize=20} ${downspeed eth0}
${offset 25}${font Nimbus Sans L:pixelsize=10 style=bold}Sube a ${voffset -11}${goto 90}${font Impact:pixelsize=20} ${upspeed eth0}
${offset 25}${font Nimbus Sans L:pixelsize=10 style=bold}Total de Descarga ${voffset -10}${font Impact:pixelsize=20}${totaldown eth0}
#traf eth#
${color4}${voffset 35}${cpugraph cpu6 1,300}${voffset -65}${cpugraph cpu6 67,1}
${color4}${voffset -42}${font Impact :pixelsize=20 style=bold}${offset 20} Ethernet ${color4}${offset 25}${addrs eth0}
${color3}${voffset -105}${offset 355}${font Nimbus Sans L:pixelsize=10 style=bold}Descarga a ${voffset -11}${goto 424}${font Impact:pixelsize=20}${downspeed eth0}
${color3}${offset 355}${font Nimbus Sans L:pixelsize=10 style=bold}Sube a ${voffset -11}${goto 424}${font Impact:pixelsize=20}${upspeed eth0}
${color3}${voffset 15}${offset 355}${font Nimbus Sans L:pixelsize=10 style=bold}Total de Descarga ${voffset -11}${font Impact:pixelsize=20}${totaldown eth0}
#almacenamiento#
${color4}${voffset 60}${cpugraph cpu6 1,220}
${color4}${voffset 190}${font Impact :pixelsize=20 style=bold}${voffset -230}${offset 20}
Armazenamento
${voffset -65}${offset 280}${font Nimbus Sans L:pixelsize=10 style=bold}Home ${voffset -11}${font Impact:pixelsize=20 style=bold}${fs_used /} / ${fs_size /}
${font Nimbus Sans L:pixelsize=10 style=bold}${offset 280}root ${voffset -11}${font Impact:pixelsize=20 style=bold}${fs_used /root} / ${fs_size /root}
--[[
Clock Rings by londonali1010 (2009)
This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.
IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement near the end of the script uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num > 5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num > 3; conversely if you update Conky every 0.5s, you should use update_num > 10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.
To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
lua_load ~/scripts/clock_rings-v1.1.1.lua
lua_draw_hook_pre clock_rings
Changelog:
+ v1.1.1 -- Fixed minor bug that caused the script to crash if conky_parse() returns a nil value (20.10.2009)
+ v1.1 -- Added colour option for clock hands (07.10.2009)
+ v1.0 -- Original release (30.09.2009)
]]
settings_table = {
--[[Anneau des heures
{
name='time',
arg='%I.%M',
max=12,
bg_colour=0x2E2E2E,
bg_alpha=0.1,
fg_colour=0xffffff,
fg_alpha=0.2,
x=60, y=70,
radius=40,
thickness=5,
start_angle=0,
end_angle=360
},
--Anneau des minutes
{
name='time',
arg='%M.%S',
max=60,
bg_colour=0x2E2E2E,
bg_alpha=0.1,
fg_colour=0xffffff,
fg_alpha=0.4,
x=60, y=70,
radius=46,
thickness=5,
start_angle=0,
end_angle=360
},]]
--Anneau des secondes
{
name='time',
arg='%S',
max=60,
bg_colour=0x2E2E2E,
bg_alpha=0.2,
fg_colour=0x424242,
fg_alpha=0.8,
x=445, y=120,
radius=102,
thickness=6,
start_angle=0,
end_angle=360
},
{
name='time',
arg='%M.%S',
max=60,
bg_colour=0x2E2E2E,
bg_alpha=0.2,
fg_colour=0x424242,
fg_alpha=0.8,
x=445, y=120,
radius=90,
thickness=10,
start_angle=0,
end_angle=360
},
{
name='time',
arg='%I.%M',
max=12,
bg_colour=0x2E2E2E,
bg_alpha=0.2,
fg_colour=0x424242,
fg_alpha=0.8,
x=445, y=120,
radius=78,
thickness=4,
start_angle=0,
end_angle=360
},
{
name='cpu',
arg='cpu1',
max=100,
bg_colour=0x2E2E2E,
bg_alpha=0.2,
fg_colour=0x424242,
fg_alpha=0.8,
x=342, y=600,
radius=40,
thickness=3,
start_angle=0,
end_angle=360
},
{
name='cpu',
arg='cpu2',
max=100,
bg_colour=0x2E2E2E,
bg_alpha=0.2,
fg_colour=0x424242,
fg_alpha=0.8,
x=342, y=600,
radius=25,
thickness=10,
start_angle=0,
end_angle=360
},
{
name='memperc',
arg='/',
max=100,
bg_colour=0x2E2E2E,
bg_alpha=0.2,
fg_colour=0x424242,
fg_alpha=0.8,
x=250, y=425,
radius=70,
thickness=8,
start_angle=0,
end_angle=360
},
--[[{
name='fs_used_perc',
arg='/',
max=100,
bg_colour=0x2E2E2E,
bg_alpha=0.1,
fg_colour=0x0778ec,
fg_alpha=0.6,
x=105, y=454,
radius=35,
thickness=10,
start_angle=0,
end_angle=360
},]]
}
--Use these settings to define the origin and extent of your clock.
clock_r=60
--Coordinates of the centre of the clock, in pixels, from the top left of the Conky window.
clock_x=445
clock_y=120
--Colour & alpha of the clock hands
clock_colour=0x424242
clock_alpha=0.8
--Show the seconds hand ?
show_seconds=true
require 'cairo'
function rgb_to_r_g_b(colour,alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end
function draw_ring(cr,t,pt)
local w,h=conky_window.width,conky_window.height
local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']
local angle_0=sa*(2*math.pi/360)-math.pi/2
local angle_f=ea*(2*math.pi/360)-math.pi/2
local t_arc=t*(angle_f-angle_0)
--Draw background ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
cairo_set_line_width(cr,ring_w)
cairo_stroke(cr)
--Draw indicator ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
cairo_stroke(cr)
end
function draw_clock_hands(cr,xc,yc)
local secs,mins,hours,secs_arc,mins_arc,hours_arc
local xh,yh,xm,ym,xs,ys
secs=os.date("%S")
mins=os.date("%M")
hours=os.date("%I")
secs_arc=(2*math.pi/60)*secs
mins_arc=(2*math.pi/60)*mins+secs_arc/60
hours_arc=(2*math.pi/12)*hours+mins_arc/12
--Draw hour hand
xh=xc+0.65*clock_r*math.sin(hours_arc)
yh=yc-0.65*clock_r*math.cos(hours_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xh,yh)
--
cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
cairo_set_line_width(cr,5)
cairo_set_source_rgba(cr,rgb_to_r_g_b(clock_colour,clock_alpha))
cairo_stroke(cr)
--Draw minute hand
xm=xc+0.95*clock_r*math.sin(mins_arc)
ym=yc-0.95*clock_r*math.cos(mins_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xm,ym)
--
cairo_set_line_width(cr,3)
cairo_stroke(cr)
-- Draw seconds hand
if show_seconds then
xs=xc+1.1*clock_r*math.sin(secs_arc)
ys=yc-1.1*clock_r*math.cos(secs_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xs,ys)
--
cairo_set_line_width(cr,1)
cairo_stroke(cr)
end
end
function conky_clock_rings()
local function setup_rings(cr,pt)
local str=''
local value=0
str=string.format('${%s %s}',pt['name'],pt['arg'])
str=conky_parse(str)
value=tonumber(str)
if value == nil then value = 0 end
--Les ajouts suivants permettent de corriger le retard prit par les anneaux
--Ajout wlourf : conversion des minutes en centièmes d'heures
if pt['arg'] == "%I.%M" then
value=os.date("%I")+os.date("%M")/60
if value>12 then value=value-12 end
end
--Ajout Fenouille84 : conversion des secondes en centièmes de minutes
if pt['arg'] == "%M.%S" then
value=os.date("%M")+os.date("%S")/60
end
--Fin ajout
pct=value/pt['max']
draw_ring(cr,pct,pt)
end
--Check that Conky has been running for at least 5s
if conky_window==nil then return end
local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
local cr=cairo_create(cs)
local updates=conky_parse('${updates}')
update_num=tonumber(updates)
if update_num>5 then
for i in pairs(settings_table) do
setup_rings(cr,settings_table[i])
end
end
draw_clock_hands(cr,clock_x,clock_y)
end
--[[
Clock Rings by londonali1010 (2009)
This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.
IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement near the end of the script uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num > 5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num > 3; conversely if you update Conky every 0.5s, you should use update_num > 10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.
To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
lua_load ~/scripts/clock_rings-v1.1.1.lua
lua_draw_hook_pre clock_rings
Changelog:
+ v1.1.1 -- Fixed minor bug that caused the script to crash if conky_parse() returns a nil value (20.10.2009)
+ v1.1 -- Added colour option for clock hands (07.10.2009)
+ v1.0 -- Original release (30.09.2009)
]]
settings_table = {
--[[Anneau des heures
{
name='time',
arg='%I.%M',
max=12,
bg_colour=0x6c6c71,
bg_alpha=0.1,
fg_colour=0xffffff,
fg_alpha=0.2,
x=60, y=70,
radius=40,
thickness=5,
start_angle=0,
end_angle=360
},
--Anneau des minutes
{
name='time',
arg='%M.%S',
max=60,
bg_colour=0x6c6c71,
bg_alpha=0.1,
fg_colour=0xffffff,
fg_alpha=0.4,
x=60, y=70,
radius=46,
thickness=5,
start_angle=0,
end_angle=360
},]]
--Anneau des secondes
{
name='wireless_link_qual_perc',
arg='eth0',
max=100,
bg_colour=0x6c6c71,
bg_alpha=0.2,
fg_colour=0x6c6c71,
fg_alpha=0.8,
x=305, y=90,
radius=75,
thickness=10,
start_angle=0,
end_angle=360
},
--[[{
name='wireless_link_qual_perc',
arg='ppp0',
max=100,
bg_colour=0x6c6c71,
bg_alpha=0.1,
fg_colour=0x0778ec,
fg_alpha=0.6,
x=305, y=83,
radius=45,
thickness=5,
start_angle=0,
end_angle=360
},]]
{
name='downspeedf',
arg='eth0',
max=800,
bg_colour=0x6c6c71,
bg_alpha=0.2,
fg_colour=0x6c6c71,
fg_alpha=0.8,
x=204, y=210,
radius=40,
thickness=3,
start_angle=0,
end_angle=360
},
{
name='upspeedf',
arg='eth0',
max=800,
bg_colour=0x6c6c71,
bg_alpha=0.2,
fg_colour=0x6c6c71,
fg_alpha=0.8,
x=204, y=210,
radius=30,
thickness=10,
start_angle=0,
end_angle=360
},
{
name='downspeedf',
arg='eth0',
max=800,
bg_colour=0x6c6c71,
bg_alpha=0.2,
fg_colour=0x6c6c71,
fg_alpha=0.8,
x=304, y=290,
radius=40,
thickness=3,
start_angle=0,
end_angle=360
},
{
name='upspeedf',
arg='eth0',
max=800,
bg_colour=0x6c6c71,
bg_alpha=0.2,
fg_colour=0x6c6c71,
fg_alpha=0.8,
x=304, y=290,
radius=30,
thickness=10,
start_angle=0,
end_angle=360
},
{
name="fs_used_perc",
arg="/",
max=100,
bg_colour=0x6c6c71,
bg_alpha=0.2,
fg_colour=0x6c6c71,
fg_alpha=0.8,
x=225, y=450,
radius=45,
thickness=6,
start_angle=0,
end_angle=360
},
{
name="fs_used_perc",
arg="/root",
max=100,
bg_colour=0x6c6c71,
bg_alpha=0.2,
fg_colour=0x6c6c71,
fg_alpha=0.8,
x=225, y=450,
radius=35,
thickness=6,
start_angle=0,
end_angle=360
},
--[[{
name="exec conkyExaile",
arg="--datatype=PP",
max=100,
bg_colour=0x6c6c71,
bg_alpha=0.1,
fg_colour=0x0778ec,
fg_alpha=0.6,
x=305, y=374,
radius=30,
thickness=3,
start_angle=0,
end_angle=360
},]]
--[[{
name="exec conkyExaile",
arg="--datatype=PP",
max=100,
bg_colour=0x6c6c71,
bg_alpha=0.0,
fg_colour=0x0778ec,
fg_alpha=0.6,
x=305, y=374,
radius=22,
thickness=8,
start_angle=0,
end_angle=360
},]]
}
--Use these settings to define the origin and extent of your clock.
clock_r=28
--Coordinates of the centre of the clock, in pixels, from the top left of the Conky window.
clock_x=60
clock_y=82
--Colour & alpha of the clock hands
clock_colour=0xffffff
clock_alpha=0
--Show the seconds hand ?
show_seconds=true
require 'cairo'
function rgb_to_r_g_b(colour,alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end
function draw_ring(cr,t,pt)
local w,h=conky_window.width,conky_window.height
local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']
local angle_0=sa*(2*math.pi/360)-math.pi/2
local angle_f=ea*(2*math.pi/360)-math.pi/2
local t_arc=t*(angle_f-angle_0)
--Draw background ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
cairo_set_line_width(cr,ring_w)
cairo_stroke(cr)
--Draw indicator ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
cairo_stroke(cr)
end
function draw_clock_hands(cr,xc,yc)
local secs,mins,hours,secs_arc,mins_arc,hours_arc
local xh,yh,xm,ym,xs,ys
secs=os.date("%S")
mins=os.date("%M")
hours=os.date("%I")
secs_arc=(2*math.pi/60)*secs
mins_arc=(2*math.pi/60)*mins+secs_arc/60
hours_arc=(2*math.pi/12)*hours+mins_arc/12
--Draw hour hand
xh=xc+0.65*clock_r*math.sin(hours_arc)
yh=yc-0.65*clock_r*math.cos(hours_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xh,yh)
--
cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
cairo_set_line_width(cr,5)
cairo_set_source_rgba(cr,rgb_to_r_g_b(clock_colour,clock_alpha))
cairo_stroke(cr)
--Draw minute hand
xm=xc+0.95*clock_r*math.sin(mins_arc)
ym=yc-0.95*clock_r*math.cos(mins_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xm,ym)
--
cairo_set_line_width(cr,3)
cairo_stroke(cr)
-- Draw seconds hand
if show_seconds then
xs=xc+1.1*clock_r*math.sin(secs_arc)
ys=yc-1.1*clock_r*math.cos(secs_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xs,ys)
--
cairo_set_line_width(cr,1)
cairo_stroke(cr)
end
end
function conky_clock_rings()
local function setup_rings(cr,pt)
local str=''
local value=0
str=string.format('${%s %s}',pt['name'],pt['arg'])
str=conky_parse(str)
value=tonumber(str)
if value == nil then value = 0 end
--Les ajouts suivants permettent de corriger le retard prit par les anneaux
--Ajout wlourf : conversion des minutes en centièmes d'heures
if pt['arg'] == "%I.%M" then
value=os.date("%I")+os.date("%M")/60
if value>12 then value=value-12 end
end
--Ajout Fenouille84 : conversion des secondes en centièmes de minutes
if pt['arg'] == "%M.%S" then
value=os.date("%M")+os.date("%S")/60
end
--Fin ajout
pct=value/pt['max']
draw_ring(cr,pct,pt)
end
--Check that Conky has been running for at least 5s
if conky_window==nil then return end
local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
local cr=cairo_create(cs)
local updates=conky_parse('${updates}')
update_num=tonumber(updates)
if update_num>5 then
for i in pairs(settings_table) do
setup_rings(cr,settings_table[i])
end
end
draw_clock_hands(cr,clock_x,clock_y)
end
"Somente seres humanos excepcionais e irrepreensíveis suscitam ideias generosas e ações elevadas. O conhecimento é limitado. A imaginação envolve ao mundo."
por Roger Braga » Qua, 16 de Novembro 2011, 1:42
VIOLATOR
# -- Ustawienia Conky -- #
# -- conky by didi -- #
background yes
cpu_avg_samples 2
pad_percents 2 # to co nizej, miejsc po przecinku
short_units yes # krotka wersja podawania wielkosci dyskow np. 612.21M/3.80G
stippled_borders 3
total_run_times 0
update_interval 1.0
use_spacer right
net_avg_samples 2
no_buffers yes
uppercase no
imlib_cache_size 0
# -- Ustawienia tekstu -- #
uppercase no
override_utf8_locale yes
use_xft yes
text_buffer_size 8000
xftalpha 1.0
xftfont Trebuchet MS:size=7
# -- Specyfikacja okien -- #
own_window yes
own_window_colour 000000 # Black
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_transparent yes
own_window_type override
# -- Ustawienia grafiki -- #
double_buffer yes
draw_borders no
draw_graph_borders no
draw_outline no
draw_shades no
# -- Ustawienia koloru -- #
color0 1c1c1c # prawie czarny
color1 000000 # czarny
color2 7e5973 # braz 64574e
color3 a82553 # rozowy f71f84
color4 3D2C31 # zielony
color5 b3b3b3 # jasny b3b3b3
color6 a7a7a7 # szary
color7 090202 # ciemny
color8 6A324D # fiolet
color9 000000 # czarny
default_color bfbfbf # ciemny 141414
default_outline_color 000000 # Black
default_shade_color 000000 # Black
# Layout
alignment top_right
gap_x 1
gap_y 100
max_specials 1024
max_user_text 10000
maximum_width 120
minimum_size 110 3000
border_margin 10
border_width 1
# -- Load Lua -- #
lua_load ~/.conky/punto.lua
lua_draw_hook_post main_bars
#STATYSTYKI SIECI
#${color5}${font Trebuchet MS:bold:size=8}${voffset 19}${alignc}DOWNLOAD ${time %B}
#${color5}${font}${alignc}${execi 300 vnstat -m | grep "`date +"'%y"`" | tail -1 | awk '{print $3 $4}'}
#${color5}${font Trebuchet MS:bold:size=8}${voffset 5}${alignc}UPLOAD ${time %B}
#${color5}${font}${alignc}${execi 300 vnstat -m | grep "`date +"'%y"`" | tail -1 | awk '{print $6 $7}'}${font}
TEXT
${color5}${font Trebuchet MS:bold:size=8}${voffset 11}${alignc}
${color5}${font Trebuchet MS:bold:size=8}${voffset 11}${alignc}CPU 1
${color5}${font}${alignc}${freq_g (1)} GHz Temp: ${exec sensors | grep 'Core 0' | awk '{print $3}' | cut -c2-3}°C
${color5}${font Trebuchet MS:bold:size=8}${voffset 11}${alignc}CPU 2
${color5}${font}${alignc}${freq_g (2)} GHz Temp: ${exec sensors | grep 'Core 1' | awk '{print $3}' | cut -c2-3}°C
${color5}${font Trebuchet MS:bold:size=8}${voffset 11}${alignc}RAM ${font}${memperc}%
${color5}${voffset 7}${top_mem name 1}${alignr}${top mem 1} %
${top_mem name 2}${alignr}${top mem 2} %
${top_mem name 3}${alignr}${top mem 3} %
#${color5}${font Trebuchet MS:bold:size=8}${voffset 11}${alignc}BATERIA
${color5}${font Trebuchet MS:bold:size=8}${voffset 11}${alignc}HDD SYSTEM
${color5}${font}${alignc}${fs_used /} / ${fs_size /}
${color5}${font Trebuchet MS:bold:size=8}${voffset 11}${alignc}HDD HOME
${color5}${font}${alignc}${fs_used /home} / ${fs_size /home}
${color5}${font Trebuchet MS:bold:size=8}${voffset 11}${alignc}IP
${color5}${font}${alignc}${addr eth0}
${color5}${font}${alignc}${execi 3600 wget -O - http://whatismyip.org/ | tail}
${color5}${font Trebuchet MS:bold:size=8}${voffset 11}${alignc}DOWN: ${font}${downspeed eth0}b/s
${color5}${font Trebuchet MS:bold:size=8}${voffset 11}${alignc}UPLOAD: ${font}${upspeed eth0}b/s
${color5}${font Trebuchet MS:bold:size=8}${voffset 19}${alignc}DOWNLOAD ${time %B}
${color5}${font}${alignc}${execi 300 vnstat -m | grep "`date +"'%y"`" | tail -1 | awk '{print $3 $4}'}
${color5}${font Trebuchet MS:bold:size=8}${voffset 5}${alignc}UPLOAD ${time %B}
${color5}${font}${alignc}${execi 300 vnstat -m | grep "`date +"'%y"`" | tail -1 | awk '{print $6 $7}'}${font}
--[[ BARGRAPH WIDGET
v2.0 by wlourf (12.07.2010)
this widget draws a bargraph with differe,ts effects
http://u-scripts.blogspot.com/2010/07/bargraph-widget.html
Parameters are :
3 parameters are mandatory
name - the name of the conky variable to display, for example for {$cpu cpu0}, just write name="cpu"
arg - the argument of the above variable, for example for {$cpu cpu0}, just write arg="cpu0"
arg can be a numericla value if name=""
max - the maximum value the above variable can reach, for example for {$cpu cpu0}, just write max=100
Optional parameters:
x,y - coordinates of the starting point of the bar, default = middle of the conky window
cap - end of cap line, ossibles values are r,b,s (for round, butt, square), default="b"
http://www.cairographics.org/samples/set_line_cap/
angle - angle of rotation of the bar in degress, default = 0 (i.e. a vertical bar)
set to 90 for an horizontal bar
skew_x - skew bar around x axis, défaut = 0
skew_y - skew bar around y axis, défaut = 600
blocks - number of blocks to display for a bar (values >0) , default= 10
height - height of a block, default=20 pixels
width - width of a block, default=20 pixels
space - space between 2 blocks, default=2 pixels
angle_bar - this angle is used to draw a bar on a circular way (ok, this is no more a bar !) default=0
radius - for cicular bars, internal radius, default=0
with radius, parameter width has no more effect.
Colours below are defined into braces {colour in hexadecimal, alpha}
fg_colour - colour of a block ON, default= {0x00FF00,1}
bg_colour - colour of a block OFF, défaut = {0x00FF00,0.5}
alarm - threshold, values after this threshold will use alarm_colour colour , default=max
alarm_colour - colour of a block greater than alarm, default=fg_colour
smooth - (true or false), create a gradient from fg_colour to bg_colour, default=false
mid_colour - colours to add to gradient, with this syntax {position into the gradient (0 to1), colour hexa, alpha}
for example, this table {{0.25,0xff0000,1},{0.5,0x00ff00,1},{0.75,0x0000ff,1}} will add
3 colurs to gradient created by fg_colour and alarm_colour, default=no mid_colour
led_effect - add LED effects to each block, default=no led_effect
if smooth=true, led_effect is not used
possibles values : "r","a","e" for radial, parallelel, perdendicular to the bar (just try!)
led_effect has to be used with theses colours :
fg_led - middle colour of a block ON, default = fg_colour
bg_led - middle colour of a block OFF, default = bg_colour
alarm_led - middle colour of a block > ALARM, default = alarm_colour
reflection parameters, not avaimable for circular bars
reflection_alpha - add a reflection effect (values from 0 to 1) default = 0 = no reflection
other values = starting opacity
reflection_scale - scale of the reflection (default = 1 = height of text)
reflection_length - length of reflection, define where the opacity will be set to zero
calues from 0 to 1, default =1
reflection - position of reflection, relative to a vertical bar, default="b"
possibles values are : "b","t","l","r" for bottom, top, left, right
v1.0 (10 Feb. 2010) original release
v1.1 (13 Feb. 2010) numeric values can be passed instead conky stats with parameters name="", arg = numeric_value
v1.2 (28 Feb. 2010) just renamed the widget to bargraph
v1.3 (03 March 2010) added parameters radius & angle_bar to draw the bar in a circular way
v2.0 (12 Jul. 2010) rewrite script + add reflection effects and parameters are now set into tables
]]
require 'cairo'
----------------START OF PARAMETERS ----------
function conky_main_bars()
bars_settings={
{
name="cpu",
arg="cpu0",
max=100,
alarm=50,
bg_colour={0xFFFFFF,0.25},
fg_colour={0xCEFFCD,0.9},
alarm_colour={0x00D1FF,0.9},
x=5,y=67,
blocks=36,
space=1,
height=2,width=3,
angle=90,
smooth=true,
mid_colour={{0.5,0x04FF00,0.9}}
},
{
name="cpu",
arg="cpu1",
max=100,
alarm=50,
bg_colour={0xFFFFFF,0.25},
fg_colour={0xCEFFCD,0.9},
alarm_colour={0x00D1FF,0.9},
x=5,y=104,
blocks=36,
space=1,
height=2,width=3,
angle=90,
smooth=true,
mid_colour={{0.5,0x04FF00,0.9}}
},
{
name="memperc",
arg="",
max=100,
alarm=50,
bg_colour={0xFFFFFF,0.25},
fg_colour={0xCEFFCD,0.9},
alarm_colour={0x00D1FF,0.9},
x=5,y=129,
blocks=36,
space=1,
height=2,width=3,
angle=90,
smooth=true,
mid_colour={{0.5,0x04FF00,0.9}}
},
{
name='fs_used_perc',
arg='/',
max=100,
alarm=50,
bg_colour={0xFFFFFF,0.25},
fg_colour={0xCEFFCD,0.9},
alarm_colour={0x00D1FF,0.9},
x=5,y=210,
blocks=36,
space=1,
height=2,width=3,
angle=90,
smooth=true,
mid_colour={{0.5,0x04FF00,0.9}} },
{
name='fs_used_perc',
arg='/home',
max=100,
alarm=50,
bg_colour={0xFFFFFF,0.25},
fg_colour={0xCEFFCD,0.9},
alarm_colour={0x00D1FF,0.9},
x=5,y=245,
blocks=36,
space=1,
height=2,width=3,
angle=90,
smooth=true,
mid_colour={{0.5,0x04FF00,0.9}} },
{
name='downspeedf',
arg='eth0',
max=2560,
alarm=1400,
bg_colour={0xFFFFFF,0.25},
fg_colour={0xCEFFCD,0.9},
alarm_colour={0x00D1FF,0.9},
x=5,y=319,
blocks=36,
space=1,
height=2,width=3,
angle=90,
smooth=true,
mid_colour={{0.5,0x04FF00,0.9}} },
{
name='upspeedf',
arg='eth0',
max=1536,
alarm=500,
bg_colour={0xFFFFFF,0.25},
fg_colour={0xCEFFCD,0.9},
alarm_colour={0x00D1FF,0.9},
x=5,y=347,
blocks=36,
space=1,
height=2,width=3,
angle=90,
smooth=true,
mid_colour={{0.5,0x04FF00,0.9}} },
}
-----------END OF PARAMETERS--------------
if conky_window == nil then return end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
cr = cairo_create(cs)
--prevent segmentation error when reading cpu state
if tonumber(conky_parse('${updates}'))>3 then
for i in pairs(bars_settings) do
draw_multi_bar_graph(bars_settings[i])
end
end
cairo_destroy(cr)
cairo_surface_destroy(cs)
end
function draw_multi_bar_graph(t)
cairo_save(cr)
--check values
if t.name==nil and t.arg==nil then
print ("No input values ... use parameters 'name' with 'arg' or only parameter 'arg' ")
return
end
if t.max==nil then
print ("No maximum value defined, use 'max'")
return
end
if t.name==nil then t.name="" end
if t.arg==nil then t.arg="" end
--set default values
if t.x == nil then t.x = conky_window.width/2 end
if t.y == nil then t.y = conky_window.height/2 end
if t.blocks == nil then t.blocks=10 end
if t.height == nil then t.height=10 end
if t.angle == nil then t.angle=0 end
t.angle = t.angle*math.pi/180
--line cap style
if t.cap==nil then t.cap = "b" end
local cap="b"
for i,v in ipairs({"s","r","b"}) do
if v==t.cap then cap=v end
end
delta=0
if t.cap=="r" or t.cap=="s" then delta = t.height end
if cap=="s" then cap = CAIRO_LINE_CAP_SQUARE
elseif cap=="r" then
cap = CAIRO_LINE_CAP_ROUND
elseif cap=="b" then
cap = CAIRO_LINE_CAP_BUTT
end
--end line cap style
--if t.led_effect == nil then t.led_effect="r" end
if t.width == nil then t.width=20 end
if t.space == nil then t.space=2 end
if t.radius == nil then t.radius=0 end
if t.angle_bar == nil then t.angle_bar=0 end
t.angle_bar = t.angle_bar*math.pi/360 --halt angle
--colours
if t.bg_colour == nil then t.bg_colour = {0x00FF00,0.5} end
if #t.bg_colour~=2 then t.bg_colour = {0x00FF00,0.5} end
if t.fg_colour == nil then t.fg_colour = {0x00FF00,1} end
if #t.fg_colour~=2 then t.fg_colour = {0x00FF00,1} end
if t.alarm_colour == nil then t.alarm_colour = t.fg_colour end
if #t.alarm_colour~=2 then t.alarm_colour = t.fg_colour end
if t.mid_colour ~= nil then
for i=1, #t.mid_colour do
if #t.mid_colour[i]~=3 then
print ("error in mid_color table")
t.mid_colour[i]={1,0xFFFFFF,1}
end
end
end
if t.bg_led ~= nil and #t.bg_led~=2 then t.bg_led = t.bg_colour end
if t.fg_led ~= nil and #t.fg_led~=2 then t.fg_led = t.fg_colour end
if t.alarm_led~= nil and #t.alarm_led~=2 then t.alarm_led = t.fg_led end
if t.led_effect~=nil then
if t.bg_led == nil then t.bg_led = t.bg_colour end
if t.fg_led == nil then t.fg_led = t.fg_colour end
if t.alarm_led == nil then t.alarm_led = t.fg_led end
end
if t.alarm==nil then t.alarm = t.max end --0.8*t.max end
if t.smooth == nil then t.smooth = false end
if t.skew_x == nil then
t.skew_x=0
else
t.skew_x = math.pi*t.skew_x/180
end
if t.skew_y == nil then
t.skew_y=0
else
t.skew_y = math.pi*t.skew_y/180
end
if t.reflection_alpha==nil then t.reflection_alpha=0 end
if t.reflection_length==nil then t.reflection_length=1 end
if t.reflection_scale==nil then t.reflection_scale=1 end
--end of default values
local function rgb_to_r_g_b(col_a)
return ((col_a[1] / 0x10000) % 0x100) / 255., ((col_a[1] / 0x100) % 0x100) / 255., (col_a[1] % 0x100) / 255., col_a[2]
end
--functions used to create patterns
local function create_smooth_linear_gradient(x0,y0,x1,y1)
local pat = cairo_pattern_create_linear (x0,y0,x1,y1)
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
if t.mid_colour ~=nil then
for i=1, #t.mid_colour do
cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
end
end
return pat
end
local function create_smooth_radial_gradient(x0,y0,r0,x1,y1,r1)
local pat = cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
if t.mid_colour ~=nil then
for i=1, #t.mid_colour do
cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
end
end
return pat
end
local function create_led_linear_gradient(x0,y0,x1,y1,col_alp,col_led)
local pat = cairo_pattern_create_linear (x0,y0,x1,y1) ---delta, 0,delta+ t.width,0)
cairo_pattern_add_color_stop_rgba (pat, 0.0, rgb_to_r_g_b(col_alp))
cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1.0, rgb_to_r_g_b(col_alp))
return pat
end
local function create_led_radial_gradient(x0,y0,r0,x1,y1,r1,col_alp,col_led,mode)
local pat = cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
if mode==3 then
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_alp))
cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))
else
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))
end
return pat
end
local function draw_single_bar()
--this fucntion is used for bars with a single block (blocks=1) but
--the drawing is cut in 3 blocks : value/alarm/background
--not zvzimzblr for circular bar
local function create_pattern(col_alp,col_led,bg)
local pat
if not t.smooth then
if t.led_effect=="e" then
pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
elseif t.led_effect=="a" then
pat = create_led_linear_gradient (t.width/2, 0,t.width/2,-t.height,col_alp,col_led)
elseif t.led_effect=="r" then
pat = create_led_radial_gradient (t.width/2, -t.height/2, 0, t.width/2,-t.height/2,t.height/1.5,col_alp,col_led,2)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
else
if bg then
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(t.bg_colour))
else
pat = create_smooth_linear_gradient(t.width/2, 0, t.width/2,-t.height)
end
end
return pat
end
local y1=-t.height*pct/100
local y2=nil
if pct>(100*t.alarm/t.max) then
y1 = -t.height*t.alarm/100
y2 = -t.height*pct/100
if t.smooth then y1=y2 end
end
if t.angle_bar==0 then
--block for fg value
pat = create_pattern(t.fg_colour,t.fg_led,false)
cairo_set_source(cr,pat)
cairo_rectangle(cr,0,0,t.width,y1)
cairo_fill(cr)
-- block for alarm value
if not t.smooth and y2 ~=nil then
pat = create_pattern(t.alarm_colour,t.alarm_led,false)
cairo_set_source(cr,pat)
cairo_rectangle(cr,0,y1,t.width,y2-y1)
cairo_fill(cr)
y3=y2
else
y2,y3=y1,y1
end
-- block for bg value
cairo_rectangle(cr,0,y2,t.width,-t.height-y3)
pat = create_pattern(t.bg_colour,t.bg_led,true)
cairo_set_source(cr,pat)
cairo_pattern_destroy(pat)
cairo_fill(cr)
end
end --end single bar
local function draw_multi_bar()
--function used for bars with 2 or more blocks
for pt = 1,t.blocks do
--set block y
local y1 = -(pt-1)*(t.height+t.space)
local light_on=false
--set colors
local col_alp = t.bg_colour
local col_led = t.bg_led
if pct>=(100/t.blocks) or pct>0 then --ligth on or not the block
if pct>=(pcb*(pt-1)) then
light_on = true
col_alp = t.fg_colour
col_led = t.fg_led
if pct>=(100*t.alarm/t.max) and (pcb*pt)>(100*t.alarm/t.max) then
col_alp = t.alarm_colour
col_led = t.alarm_led
end
end
end
--set colors
--have to try to create gradients outside the loop ?
local pat
if not t.smooth then
if t.angle_bar==0 then
if t.led_effect=="e" then
pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
elseif t.led_effect=="a" then
pat = create_led_linear_gradient (t.width/2, -t.height/2+y1,t.width/2,0+t.height/2+y1,col_alp,col_led)
elseif t.led_effect=="r" then
pat = create_led_radial_gradient (t.width/2, y1, 0, t.width/2,y1,t.width/1.5,col_alp,col_led,2)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
else
if t.led_effect=="a" then
pat = create_led_radial_gradient (0, 0, t.radius+(t.height+t.space)*(pt-1),
0, 0, t.radius+(t.height+t.space)*(pt),
col_alp,col_led,3)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
end
else
if light_on then
if t.angle_bar==0 then
pat = create_smooth_linear_gradient(t.width/2, t.height/2, t.width/2,-(t.blocks-0.5)*(t.height+t.space))
else
pat = create_smooth_radial_gradient(0, 0, (t.height+t.space), 0,0,(t.blocks+1)*(t.height+t.space),2)
end
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(t.bg_colour))
end
end
cairo_set_source (cr, pat)
cairo_pattern_destroy(pat)
--draw a block
if t.angle_bar==0 then
cairo_move_to(cr,0,y1)
cairo_line_to(cr,t.width,y1)
else
cairo_arc( cr,0,0,
t.radius+(t.height+t.space)*(pt)-t.height/2,
-t.angle_bar -math.pi/2 ,
t.angle_bar -math.pi/2)
end
cairo_stroke(cr)
end
end
local function setup_bar_graph()
--function used to retrieve the value to display and to set the cairo structure
if t.blocks ~=1 then t.y=t.y-t.height/2 end
local value = 0
if t.name ~="" then
value = tonumber(conky_parse(string.format('${%s %s}', t.name, t.arg)))
else
value = tonumber(t.arg)
end
if value==nil then value =0 end
pct = 100*value/t.max
pcb = 100/t.blocks
cairo_set_line_width (cr, t.height)
cairo_set_line_cap (cr, cap)
cairo_translate(cr,t.x,t.y)
cairo_rotate(cr,t.angle)
local matrix0 = cairo_matrix_t:create()
cairo_matrix_init (matrix0, 1,t.skew_y,t.skew_x,1,0,0)
cairo_transform(cr,matrix0)
--call the drawing function for blocks
if t.blocks==1 and t.angle_bar==0 then
draw_single_bar()
if t.reflection=="t" or t.reflection=="b" then cairo_translate(cr,0,-t.height) end
else
draw_multi_bar()
end
--dot for reminder
--[[
if t.blocks ~=1 then
cairo_set_source_rgba(cr,1,0,0,1)
cairo_arc(cr,0,t.height/2,3,0,2*math.pi)
cairo_fill(cr)
else
cairo_set_source_rgba(cr,1,0,0,1)
cairo_arc(cr,0,0,3,0,2*math.pi)
cairo_fill(cr)
end
]]
--call the drawing function for reflection and prepare the mask used
if t.reflection_alpha>0 and t.angle_bar==0 then
local pat2
local matrix1 = cairo_matrix_t:create()
if t.angle_bar==0 then
pts={-delta/2,(t.height+t.space)/2,t.width+delta,-(t.height+t.space)*(t.blocks)}
if t.reflection=="t" then
cairo_matrix_init (matrix1,1,0,0,-t.reflection_scale,0,-(t.height+t.space)*(t.blocks-0.5)*2*(t.reflection_scale+1)/2)
pat2 = cairo_pattern_create_linear (t.width/2,-(t.height+t.space)*(t.blocks),t.width/2,(t.height+t.space)/2)
elseif t.reflection=="r" then
cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,delta+2*t.width,0)
pat2 = cairo_pattern_create_linear (delta/2+t.width,0,-delta/2,0)
elseif t.reflection=="l" then
cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,-delta,0)
pat2 = cairo_pattern_create_linear (-delta/2,0,delta/2+t.width,-0)
else --bottom
cairo_matrix_init (matrix1,1,0,0,-1*t.reflection_scale,0,(t.height+t.space)*(t.reflection_scale+1)/2)
pat2 = cairo_pattern_create_linear (t.width/2,(t.height+t.space)/2,t.width/2,-(t.height+t.space)*(t.blocks))
end
end
cairo_transform(cr,matrix1)
if t.blocks==1 and t.angle_bar==0 then
draw_single_bar()
cairo_translate(cr,0,-t.height/2)
else
draw_multi_bar()
end
cairo_set_line_width(cr,0.01)
cairo_pattern_add_color_stop_rgba (pat2, 0,0,0,0,1-t.reflection_alpha)
cairo_pattern_add_color_stop_rgba (pat2, t.reflection_length,0,0,0,1)
if t.angle_bar==0 then
cairo_rectangle(cr,pts[1],pts[2],pts[3],pts[4])
end
cairo_clip_preserve(cr)
cairo_set_operator(cr,CAIRO_OPERATOR_CLEAR)
cairo_stroke(cr)
cairo_mask(cr,pat2)
cairo_pattern_destroy(pat2)
cairo_set_operator(cr,CAIRO_OPERATOR_OVER)
end --reflection
end --setup_bar_graph()
--start here !
setup_bar_graph()
cairo_restore(cr)
end
por Roger Braga » Qua, 16 de Novembro 2011, 2:42
alignment top_middle
default_color CD0000
double_buffer yes
draw_outline no
draw_shades no
border_inner_margin 20
minimum_size 1280
net_avg_samples 2
no_buffers yes
override_utf8_locale yes
own_window_argb_visual yes
own_window_argb_value 1
own_window_class Conky
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_transparent no
own_window_colour 000000
own_window_type override
own_window_type normal
own_window yes
pad_percents 2
cpu_avg_samples 2
short_units yes
text_buffer_size 1024
total_run_times 0
update_interval 1.0
use_spacer right
use_xft yes
xftfont Zegoe Light :pixelsize=12
color1 ffffff
TEXT
${color1}${GOTO 600}${font steiner - U:pixelsize=30}${time %H:%M:%S}${font}${color}
${GOTO 570}${font Zegoe Light - U:pixelsize=18}${time %A} ${time %B, %d %Y}${font}
${GOTO 50}${font Zegoe Light - U:pixelsize=24}${color1} Usage${font}${voffset -13}${GOTO 270}${font Zegoe Light - U:pixelsize=24}Sensors${font}${voffset -13}${GOTO 1140}${font Zegoe Light - U:pixelsize=24}Network${font}
${color}${GOTO 60}Mem: ${color1}$mem ${color}${GOTO 280}CPU: ${color1}${exec sensors | grep 'Core 0' | awk '{print $3}' | cut -c2-3}°C ${color}${GOTO 1150}Up: ${color1}${font} ${upspeed eth0} ${color}
${GOTO 60}CPU: ${color1}$cpu % ${color}${GOTO 280}HDD: ${color1}${exec hddtemp /dev/sda -n --unit=C}°C${color}${GOTO 890}${GOTO 1150}Dn: ${color1}${font} ${downspeed eth0}${color}
${GOTO 60}Root: ${color1}$fs_free ${color}${GOTO 280}Mother Temp: ${color1}${exec sensors | grep "MB Temp" | cut -b 21-22} °C ${color}${GOTO 1150}IP: ${color1}${execi 400 ~/.conky/scripts/ip.sh}${color}
${GOTO 60}Home: ${color1}${fs_free /home/} ${color}${GOTO 280}HD Temp: ${color1}${exec hddtemp /dev/sda -n --unit=C}°C ${color}${GOTO 1150}Local IP: ${color1}${addr eth0}
por Roger Braga » Qua, 16 de Novembro 2011, 5:11
# -- Conky settings -- #
background no
update_interval 1
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale yes
double_buffer yes
no_buffers yes
text_buffer_size 2048
imlib_cache_size 0
# -- Window specifications -- #
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below
border_inner_margin 0
border_outer_margin 0
minimum_size 1450 500
maximum_width 1600
alignment botton_left
gap_x -60
gap_y -100
# -- Graphics settings -- #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
# -- Text settings -- #
use_xft yes
xftfont Aller:size=24
xftalpha 0.8
uppercase no
default_color f0f0f0
color1 696969
# -- Lua Load -- #
lua_load ~/.conky/lua/.lua.lua
lua_draw_hook_pre ring_stats
TEXT
${voffset 55}${font Baveuse 3D:bold:size=68}${alignr}${color1}${time %H:%M}${font}${color}
${voffset -20}${goto 100}${hr 2}
${voffset -57}${goto 100}${color1}${font Baveuse 3D:size=24}${time %A, %d %B %Y}${color}
${voffset -10}${goto 100}${font Aller:size=9}Local Network: ${goto 190}Down ${downspeed eth0}/s ${goto 320}Wireless Network: ${goto 430}Down ${downspeed eth0}/s
${goto 190}Up ${upspeed eth0}/s ${goto 430}Up ${upspeed eth0}/s
--[[
Ring Meters by londonali1010 (2009)
This script draws percentage meters as rings. It is fully customisable; all options are described in the script.
IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num > 5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num > 3; conversely if you update Conky every 0.5s, you should use update_num > 10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.
To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
lua_load ~/scripts/rings-v1.2.1.lua
lua_draw_hook_pre ring_stats
Changelog:
+ v1.2.1 -- Fixed minor bug that caused script to crash if conky_parse() returns a nil value (20.10.2009)
+ v1.2 -- Added option for the ending angle of the rings (07.10.2009)
+ v1.1 -- Added options for the starting angle of the rings, and added the "max" variable, to allow for variables that output a numerical value rather than a percentage (29.09.2009)
+ v1.0 -- Original release (28.09.2009)
]]
settings_table = {
{
-- Edit this table to customise your rings.
-- You can create more rings simply by adding more elements to settings_table.
-- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
name='time',
-- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
arg='%I.%M',
-- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
max=12,
-- "bg_colour" is the colour of the base ring.
bg_colour=0xffffff,
-- "bg_alpha" is the alpha value of the base ring.
bg_alpha=0.1,
-- "fg_colour" is the colour of the indicator part of the ring.
fg_colour=0xffffff,
-- "fg_alpha" is the alpha value of the indicator part of the ring.
fg_alpha=0.5,
-- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
x=152, y=270,
-- "radius" is the radius of the ring.
radius=15,
-- "thickness" is the thickness of the ring, centred around the radius.
thickness=29,
-- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
start_angle=0,
-- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger (e.g. more clockwise) than start_angle.
end_angle=360
},
{
name='time',
arg='%M.%S',
max=60,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xffffff,
fg_alpha=0.3,
x=152, y=270,
radius=22,
thickness=42,
start_angle=0,
end_angle=360
},
{
name='time',
arg='%S',
max=60,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xffffff,
fg_alpha=0.2,
x=152, y=270,
radius=30,
thickness=59,
start_angle=0,
end_angle=360
},
{
name='cpu',
arg='cpu0',
max=100,
bg_colour=0xffffff,
bg_alpha=0.3,
fg_colour=0xFF4500,
fg_alpha=0.6,
x=910, y=163,
radius=45,
thickness=89,
start_angle=90,
end_angle=270
},
{
name='memperc',
arg='',
max=100,
bg_colour=0xffffff,
bg_alpha=0.3,
fg_colour=0xFF4500,
fg_alpha=0.6,
x=1100, y=163,
radius=45,
thickness=89,
start_angle=90,
end_angle=270
},
{
name='time',
arg='%d',
max=31,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xFF4500,
fg_alpha=0.4,
x=152, y=270,
radius=70,
thickness=5,
start_angle=-60,
end_angle=60
},
{
name='time',
arg='%m',
max=12,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xFF4500,
fg_alpha=0.4,
x=152, y=270,
radius=70,
thickness=5,
start_angle=120,
end_angle=240
},
{
name='fs_used_perc',
arg='/',
max=150,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF4500,
fg_alpha=0.3,
x=960, y=161,
radius=20,
thickness=37,
start_angle=-90,
end_angle=90
},
{
name='fs_used_perc',
arg='/root',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF4500,
fg_alpha=0.3,
x=859, y=161,
radius=20,
thickness=37,
start_angle=-90,
end_angle=90
},
{
name='fs_used_perc',
arg='/home',
max=150,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF4500,
fg_alpha=0.3,
x=1049, y=161,
radius=20,
thickness=37,
start_angle=-90,
end_angle=90
},
}
require 'cairo'
function rgb_to_r_g_b(colour,alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end
function draw_ring(cr,t,pt)
local w,h=conky_window.width,conky_window.height
local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']
local angle_0=sa*(2*math.pi/360)-math.pi/2
local angle_f=ea*(2*math.pi/360)-math.pi/2
local t_arc=t*(angle_f-angle_0)
-- Draw background ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
cairo_set_line_width(cr,ring_w)
cairo_stroke(cr)
-- Draw indicator ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
cairo_stroke(cr)
end
function conky_ring_stats()
local function setup_rings(cr,pt)
local str=''
local value=0
str=string.format('${%s %s}',pt['name'],pt['arg'])
str=conky_parse(str)
value=tonumber(str)
if value == nil then value = 0 end
pct=value/pt['max']
draw_ring(cr,pct,pt)
end
if conky_window==nil then return end
local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
local cr=cairo_create(cs)
local updates=conky_parse('${updates}')
update_num=tonumber(updates)
if update_num>5 then
for i in pairs(settings_table) do
setup_rings(cr,settings_table[i])
end
end
end
"Somente seres humanos excepcionais e irrepreensíveis suscitam ideias generosas e ações elevadas. O conhecimento é limitado. A imaginação envolve ao mundo."
por Roger Braga » Qua, 16 de Novembro 2011, 7:24
##Search tips
#google calendar username --username=Username@gmail.com
#google calendar password --password=Password}
# Horizontal conky
#Default Fonts
use_xft yes
xftfont URW Chancery L:size=12
background no
double_buffer yes
xftalpha 0.5
# Window Settings
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
# Window Boarder
draw_shades no
draw_outline no
# Default Color
default_color FFFFFF
default_shade_color 000000
# Color Title.
color1 000000
# Lua Load
lua_load ~/.conky/scripts/vertical.lua
lua_draw_hook_post main_bars
# Ect
imlib_cache_size 0
out_to_console no
update_interval 1
total_run_times 0
# Size and position.
minimum_size 200 300
gap_x 2
gap_y 10
alignment top_right
no_buffers yes
use_spacer right
TEXT
${font Crystal:size=56}${color1}${time %I}:${time %M}${font Crystal:size=20}${time %p}
${font}${alignc}${time %A} ${time %b}. ${time %d} ${time %Y}
Volume${alignr}${mixer}%
RAM: ${mem} ${alignr}${membar 12,50}
CPU1: ${cpu cpu0}% ${alignr}${cpubar cpu0 12,50}
CPU2: ${cpu cpu1}% ${alignr}${cpubar cpu1 12,50}
SWAP: $swapperc% ${alignr}${swapbar 12,50}
Down: ${downspeed eth0}${font} ${alignr}${downspeedgraph eth0 12,50 00D1FF FF1900}
Up: ${upspeed eth0}${font} ${alignr}${upspeedgraph eth0 12,50 00D1FF FF1900}
Local IP: ${alignr}${addr eth0}
Home: ${fs_used_perc /home}%${alignr}${fs_size /home}
HD Temp:${alignr}${exec hddtemp /dev/sda -n --unit=C}°C
CPU Temp: ${alignr}${exec sensors | grep 'Core 0' | awk '{print $3}' | cut -c2-3}°C
Mother Temp: ${alignr}${exec sensors | grep "MB Temp" | cut -b 21-22} °C
${hr 1}
Uptime${alignc}${uptime}
Gmail${alignr}${execi 300 python ~/.conky/scripts/gmail.py}
Weather${hr 1}
${alignc}Current
${alignc}${execpi 360 conkyForecast --location=BRXX0232 --datatype=HT --centeredwidth=3 } / ${execpi 360 conkyForecast --location=BRXX0232 --datatype=LT --centeredwidth=3 }
${alignc}${execpi 360 conkyForecast --location=BRXX0232 --datatype=CC}
${alignc}${execpi 360 conkyForecast --location=BRXX0232 --datatype=DW --startday=1}
${alignc}${execpi 360 conkyForecast --location=BRXX0232 --datatype=HT --startday=1 } / ${execpi 360 conkyForecast --location=BRXX0232 --datatype=LT --startday=1 --centeredwidth=3 }
${alignc}${execpi 360 conkyForecast --location=BRXX0232 --datatype=CC --startday=4}
${alignc}${execpi 360 conkyForecast --location=BRXX0232 --datatype=DW --startday=2}
${alignc}${execpi 360 conkyForecast --location=BRXX0232 --datatype=HT --startday=2 } / ${execpi 360 conkyForecast --location=BRXX0232 --datatype=LT --startday=2 --centeredwidth=3 }
${alignc}${execpi 360 conkyForecast --location=BRXX0232 --datatype=CC --startday=2}
${alignc}${execpi 360 conkyForecast --location=BRXX0232 --datatype=DW --startday=3}
${alignc}${execpi 360 conkyForecast --location=BRXX0232 --datatype=HT --startday=3 } / ${execpi 360 conkyForecast --location=BRXX0232 --datatype=LT --startday=3 --centeredwidth=3 }
${alignc}${execpi 360 conkyForecast --location=BRXX0232 --datatype=CC --startday=3}
${alignc}${execpi 360 conkyForecast --location=BRXX0232 --datatype=DW --startday=4}
${font}${alignc}${execpi 360 conkyForecast --location=BRXX0232 --datatype=HT --startday=4 } / ${execpi 360 conkyForecast --location=BRXX0232 --datatype=LT --startday=4 --centeredwidth=3 }
${alignc}${execpi 360 conkyForecast --location=BRXX0232 --datatype=CC --startday=4}
${voffset -420}${font ConkyWeather:size=50}${execpi 360 conkyForecast --location=BRXX0232 --datatype=WF}
${voffset 60}${font ConkyWeather:size=50}${voffset -60}${execpi 360 conkyForecast --location=BRXX0232 --datatype=WF --startday=1}
${voffset 25}${font ConkyWeather:size=50}${execpi 360 conkyForecast --location=BRXX0232 --datatype=WF --startday=2}
${voffset 20}${font ConkyWeather:size=50}${execpi 360 conkyForecast --location=BRXX0232 --datatype=WF --startday=3}
${voffset 10}${font ConkyWeather:size=50}${execpi 360 conkyForecast --location=BRXX0232 --datatype=WF --startday=4}
"Somente seres humanos excepcionais e irrepreensíveis suscitam ideias generosas e ações elevadas. O conhecimento é limitado. A imaginação envolve ao mundo."
por Roger Braga » Qua, 16 de Novembro 2011, 16:51
background no
font DejaVu Sans Mono:size=10
xftfont DejaVu Sans Mono:size=10
use_xft yes
xftalpha 0
update_interval 1.0
total_run_times 0
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
minimum_size 280 5
maximum_width 280
default_color 696969
default_shade_color black
default_outline_color black
alignment top_right
gap_x 30
gap_y 60
no_buffers yes
cpu_avg_samples 2
override_utf8_locale no
TEXT
${offset -7}${font openlogos:size=60}u${font DejaVu Sans Mono:size=10:style=bold}
${voffset -80}${offset 75}${nodename}${font DejaVu Sans Mono:size=10} up $uptime_short
${offset 75}$kernel on $machine
${offset 75}$processes processes ($running_processes)
${offset 75}IP ${execi 14400 wget -O - http://whatismyip.org/ | tail}
${font Mac Dingbats:size=50}h${font DejaVu Sans Mono:size=10:style=bold}
${voffset -68}${offset 75}Resources ${cpugraph 15}${font DejaVu Sans Mono:size=10}
${offset 75}CPU ${cpubar 6 cpu1}
${offset 75}RAM ${membar 6}
${offset 75}SWAP ${swapbar 6}
${voffset -25}${font Mac Dingbats:size=50}x${font DejaVu Sans Mono:size=10:style=bold}
${voffset -50}${offset 75}Top Processes${font DejaVu Sans Mono:size=10}$alignr %
${offset 75}CPU ${top name 1}$alignr${top cpu 1}
${offset 75}RAM ${top_mem name 1}$alignr${top_mem mem 1}
${font Mac Dingbats:size=50}f${font DejaVu Sans Mono:size=10:style=bold}
${voffset -65}${offset 75}Filesystem${font DejaVu Sans Mono:size=10} ${diskiograph 15}
${offset 75}Root ${fs_bar 6 /}
${offset 75}Home ${fs_bar 6 /home}
${voffset 10}${font Mac Dingbats:size=50}c${font DejaVu Sans Mono:size=10:style=bold}
${voffset -60}${offset 75}Network ${font DejaVu Sans Mono:size=10}$alignr${addr eth0}
${offset 75}Up ${upspeedgraph eth0 15}
${offset 75}Down ${downspeedgraph eth0 15}
"Somente seres humanos excepcionais e irrepreensíveis suscitam ideias generosas e ações elevadas. O conhecimento é limitado. A imaginação envolve ao mundo."
Usuários navegando neste fórum: Nenhum usuário registrado e 14 visitantes
No total, há 14 usuários online :: 0 usuários registrados, nenhum invisível, 0 bots e 14 visitantes (Esta informação é baseada em usuários ativos nos últimos 15 minutos)
O recorde de usuários online foi de 1329 em Seg, 20 de Abril 2020, 1:54
Usuários navegando neste fórum: Nenhum usuário registrado e 14 visitantes