Apresente aqui temas que gostou, skins de programas, ícones, wallpapers, conky's, etc. Ou seja, tudo o que possa alterar de estético no seu Ubuntu, apresente aqui. Em caso de dúvidas de personalização ou se quiser mostrá-la ao mundo, utilize esta secção!
Pessoal, não se esqueçam de partilhar as vossas participações no tópico dos desktops!
Entretanto, Luís, o Painel acho que ficou bem melhor com essa linha mais clara. Gostei também da abordagem diferente do tema. Apesar de não ser o mesmo tema, talvez se enquadre melhor no conjunto visual.
Agora vamos aos pormenores:
o applet das áreas de trabalho permite pô-lo mais pequeno? Acho que ficaria mais bonito, 1px mais pequeno. No caso do mockup, ele tem uma margem de 1 px à volta.
o fundo luminoso das aplicações abertas no painel lateral ficaria bem interessante!
Fontes light à lá Metro. Open Sans light talvez fossem a melhor escolha!
De resto, está bastante bom. Já nem tenho grandes coisas a dizer e até tenho medo de tentar fazer a minha abordagem, coisa que eu queria fazer hoje quando chegasse a casa
# Shadow shadow = true; # Enabled client-side shadows on windows. no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows. no-dnd-shadow = true; # Don't draw shadows on DND windows. clear-shadow = true; # Zero the part of the shadow's mask behind the # window. Fix some weirdness with ARGB windows. shadow-radius = 7; # The blur radius for shadows. (default 12) shadow-offset-x = -10; # The left offset for shadows. (default -15) shadow-offset-y = -10; # The top offset for shadows. (default -15) shadow-opacity = 0.3; # The translucency for shadows. (default .75) # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0) # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0) # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0) shadow-exclude = [ "g:si:xfce4-noti","n:e:Notification","g:si:conky" ]; # Exclude conditions for shadows. # shadow-exclude = "n:e:Notification"; shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows # (see also: --detect-rounded-corners)
# Opacity menu-opacity = 0.95; # The opacity for menus. (default 1.0) inactive-opacity = 0.70; # Default opacity of inactive windows. (0.0 - 1.0) active-opacity = 1.0; # Default opacity for active windows. (0.0 - 1.0) frame-opacity = 0.75; # Opacity of window titlebars and borders. (0.1 - 1.0) inactive-opacity-override = false; # Let inactive opacity set by 'inactive-opacity' overrides # value of _NET_WM_OPACITY. Bad choice. alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing # it may result in less X resource usage, # Yet fading may look bad. # inactive-dim = 0.2; # Dim inactive windows. (0.0 - 1.0) # inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity. # blur-background = true; # Blur background of transparent windows. # Bad performance with X Render backend. # GLX backend is preferred. # blur-background-frame = true; # Blur background of opaque windows with transparent # frames as well. blur-background-fixed = false; # Do not let blur radius adjust based on window opacity. blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ]; # Exclude conditions for background blur.
# Fading fading = true; # Fade windows during opacity changes. #fade-delta = 30; # The time between steps in a fade in milliseconds. (default 10). fade-in-step = 0.06; # Opacity change between steps while fading in. (default 0.028). fade-out-step = 0.06; # Opacity change between steps while fading out. (default 0.03). # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing. fade-exclude = [ ]; # Exclude conditions for fading.
# Other backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically # much faster but depends on a sane driver. mark-wmwin-focused = true; # Try to detect WM windows and mark them as active. mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus). use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused # instead of using FocusIn/Out events. Usually more reliable but # depends on a EWMH-compliant WM. detect-rounded-corners = true; # Detect rounded corners and treat them as rectangular when --shadow-ignore-shaped is on. detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window # managers not passing _NET_WM_OPACITY of client windows to frame # Unredirect all windows if a full-screen opaque window is detected, to maximize performance for full-screen windows, like games. # Known to cause flickering when redirecting/unredirecting windows. # windows. refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto. vsync = "none"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc" # See man page for more details. dbe = false; # Enable DBE painting mode. Rarely needed. paint-on-overlay = true; # Painting on X Composite overlay window. Recommended. sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate. # Incompatible with certain VSync methods. unredir-if-possible = true; # Unredirect all windows if a full-screen opaque window is # detected, to maximize performance for full-screen windows. focus-exclude = [ ]; # A list of conditions of windows that should always be considered # focused. detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in # the same group focused at the same time. detect-client-leader = false; # Use WM_CLIENT_LEADER to group windows. invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
# GLX backend # GLX backend fine-tune options. See man page for more info. glx-no-stencil = true; # Recommended. glx-copy-from-front = false; # Useful with --glx-swap-method, # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync. # glx-no-rebind-pixmap = true; # Recommended if it works. glx-swap-method = "undefined"; # See man page.
# Window type settings wintypes: { tooltip = { fade = true; shadow = false; opacity = 0.75; focus = true; }; # fade: Fade the particular type of windows. # shadow: Give those windows shadow # opacity: Default opacity for the type of windows. # focus: Whether to always consider windows of this type focused. };
LxPanel: Barra do Topo;
Cairo-Dock
Editado pela última vez por yuryrodrigues em Seg, 11 de Novembro 2013, 21:33, em um total de 1 vez.
Parabéns Yury e Luis! De um lado Luis com XFCE e do outro Yury com LXDE, mas ambos usam OpenBox. Luis, a preferência pelo OpenBox é por que o xfwm4 possui poucas opções ou por serem adequadas para janelas quadradas? Concordo com Claudio, apenas faltou no Tint2 o efeito destacado de sombreado branco nos aplicativos abertos.
Obs.: Yury, tem no canto esquerdo uma linha vertical de pixel vazia no painel superior.
Editado pela última vez por hailton em Seg, 11 de Novembro 2013, 21:34, em um total de 1 vez.
# Shadow shadow = true; # Enabled client-side shadows on windows. no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows. no-dnd-shadow = true; # Don't draw shadows on DND windows. clear-shadow = true; # Zero the part of the shadow's mask behind the # window. Fix some weirdness with ARGB windows. shadow-radius = 7; # The blur radius for shadows. (default 12) shadow-offset-x = -10; # The left offset for shadows. (default -15) shadow-offset-y = -10; # The top offset for shadows. (default -15) shadow-opacity = 0.3; # The translucency for shadows. (default .75) # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0) # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0) # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0) shadow-exclude = [ "g:si:xfce4-noti","n:e:Notification","g:si:conky" ]; # Exclude conditions for shadows. # shadow-exclude = "n:e:Notification"; shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows # (see also: --detect-rounded-corners)
# Opacity menu-opacity = 0.95; # The opacity for menus. (default 1.0) inactive-opacity = 0.70; # Default opacity of inactive windows. (0.0 - 1.0) active-opacity = 1.0; # Default opacity for active windows. (0.0 - 1.0) frame-opacity = 0.75; # Opacity of window titlebars and borders. (0.1 - 1.0) inactive-opacity-override = false; # Let inactive opacity set by 'inactive-opacity' overrides # value of _NET_WM_OPACITY. Bad choice. alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing # it may result in less X resource usage, # Yet fading may look bad. # inactive-dim = 0.2; # Dim inactive windows. (0.0 - 1.0) # inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity. # blur-background = true; # Blur background of transparent windows. # Bad performance with X Render backend. # GLX backend is preferred. # blur-background-frame = true; # Blur background of opaque windows with transparent # frames as well. blur-background-fixed = false; # Do not let blur radius adjust based on window opacity. blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ]; # Exclude conditions for background blur.
# Fading fading = true; # Fade windows during opacity changes. #fade-delta = 30; # The time between steps in a fade in milliseconds. (default 10). fade-in-step = 0.06; # Opacity change between steps while fading in. (default 0.028). fade-out-step = 0.06; # Opacity change between steps while fading out. (default 0.03). # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing. fade-exclude = [ ]; # Exclude conditions for fading.
# Other backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically # much faster but depends on a sane driver. mark-wmwin-focused = true; # Try to detect WM windows and mark them as active. mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus). use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused # instead of using FocusIn/Out events. Usually more reliable but # depends on a EWMH-compliant WM. detect-rounded-corners = true; # Detect rounded corners and treat them as rectangular when --shadow-ignore-shaped is on. detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window # managers not passing _NET_WM_OPACITY of client windows to frame # Unredirect all windows if a full-screen opaque window is detected, to maximize performance for full-screen windows, like games. # Known to cause flickering when redirecting/unredirecting windows. # windows. refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto. vsync = "none"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc" # See man page for more details. dbe = false; # Enable DBE painting mode. Rarely needed. paint-on-overlay = true; # Painting on X Composite overlay window. Recommended. sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate. # Incompatible with certain VSync methods. unredir-if-possible = true; # Unredirect all windows if a full-screen opaque window is # detected, to maximize performance for full-screen windows. focus-exclude = [ ]; # A list of conditions of windows that should always be considered # focused. detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in # the same group focused at the same time. detect-client-leader = false; # Use WM_CLIENT_LEADER to group windows. invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
# GLX backend # GLX backend fine-tune options. See man page for more info. glx-no-stencil = true; # Recommended. glx-copy-from-front = false; # Useful with --glx-swap-method, # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync. # glx-no-rebind-pixmap = true; # Recommended if it works. glx-swap-method = "undefined"; # See man page.
# Window type settings wintypes: { tooltip = { fade = true; shadow = false; opacity = 0.75; focus = true; }; # fade: Fade the particular type of windows. # shadow: Give those windows shadow # opacity: Default opacity for the type of windows. # focus: Whether to always consider windows of this type focused. };
# Tint2 config file # Generated by tintwizard (http://code.google.com/p/tintwizard/) # For information on manually configuring tint2 see http://code.google.com/p/tint2/wiki/Configure
talvez a barra de título da janela com foco devesse ter uma transparência menor, para ter o título mais nítido. Mas este pormenor não sei até que ponto é relevante.
Em termos de usabilidade, acho importante incluir a área de notificação, com os indicadores de som, chat e outros pormenores importantes;
tal como disse ao Luís Cardoso, seria interessante que o applet das áreas de trabalho tivesse 1px de margem, para não ficar a ocupar totalmente a barra superior;
Acho que se a barra superior tivesse a linha clara como o Luís pôs ficasse sensivelmente melhor.
De resto, volto a afirmar, vocês estão quase a chegar à perfeição! E, peço desculpa dizer isto ao Luís, mas o Yury acho que está mesmo quase lá!!
talvez a barra de título da janela com foco devesse ter uma transparência menor, para ter o título mais nítido. Mas este pormenor não sei até que ponto é relevante.
Em termos de usabilidade, acho importante incluir a área de notificação, com os indicadores de som, chat e outros pormenores importantes;
tal como disse ao Luís Cardoso, seria interessante que o applet das áreas de trabalho tivesse 1px de margem, para não ficar a ocupar totalmente a barra superior;
Acho que se a barra superior tivesse a linha clara como o Luís pôs ficasse sensivelmente melhor.
De resto, volto a afirmar, vocês estão quase a chegar à perfeição! E, peço desculpa dizer isto ao Luís, mas o Yury acho que está mesmo quase lá!!
talvez a barra de título da janela com foco devesse ter uma transparência menor, para ter o título mais nítido. Mas este pormenor não sei até que ponto é relevante.
Em termos de usabilidade, acho importante incluir a área de notificação, com os indicadores de som, chat e outros pormenores importantes;
tal como disse ao Luís Cardoso, seria interessante que o applet das áreas de trabalho tivesse 1px de margem, para não ficar a ocupar totalmente a barra superior;
Acho que se a barra superior tivesse a linha clara como o Luís pôs ficasse sensivelmente melhor.
@Claudio Novais,
Não consegui colocar margem no applet das áreas de trabalho
Alterei a opacidade dos títulos das janelas. Adicionei a borda branca no painel do topo. Coloquei a Área de Notificação, mas sem os indicadores de som, chat e etc. Não os utilizo, então apenas ocupariam espaço
# Shadow shadow = true; # Enabled client-side shadows on windows. no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows. no-dnd-shadow = true; # Don't draw shadows on DND windows. clear-shadow = true; # Zero the part of the shadow's mask behind the # window. Fix some weirdness with ARGB windows. shadow-radius = 7; # The blur radius for shadows. (default 12) shadow-offset-x = -10; # The left offset for shadows. (default -15) shadow-offset-y = -10; # The top offset for shadows. (default -15) shadow-opacity = 0.3; # The translucency for shadows. (default .75) # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0) # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0) # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0) shadow-exclude = [ "g:si:xfce4-noti","n:e:Notification","g:si:conky" ]; # Exclude conditions for shadows. # shadow-exclude = "n:e:Notification"; shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows # (see also: --detect-rounded-corners)
# Opacity menu-opacity = 0.95; # The opacity for menus. (default 1.0) inactive-opacity = 0.70; # Default opacity of inactive windows. (0.0 - 1.0) active-opacity = 1.0; # Default opacity for active windows. (0.0 - 1.0) frame-opacity = 0.85; # Opacity of window titlebars and borders. (0.1 - 1.0) inactive-opacity-override = false; # Let inactive opacity set by 'inactive-opacity' overrides # value of _NET_WM_OPACITY. Bad choice. alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing # it may result in less X resource usage, # Yet fading may look bad. # inactive-dim = 0.2; # Dim inactive windows. (0.0 - 1.0) # inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity. # blur-background = true; # Blur background of transparent windows. # Bad performance with X Render backend. # GLX backend is preferred. # blur-background-frame = true; # Blur background of opaque windows with transparent # frames as well. blur-background-fixed = false; # Do not let blur radius adjust based on window opacity. blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ]; # Exclude conditions for background blur.
# Fading fading = true; # Fade windows during opacity changes. #fade-delta = 30; # The time between steps in a fade in milliseconds. (default 10). fade-in-step = 0.06; # Opacity change between steps while fading in. (default 0.028). fade-out-step = 0.06; # Opacity change between steps while fading out. (default 0.03). # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing. fade-exclude = [ ]; # Exclude conditions for fading.
# Other backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically # much faster but depends on a sane driver. mark-wmwin-focused = true; # Try to detect WM windows and mark them as active. mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus). use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused # instead of using FocusIn/Out events. Usually more reliable but # depends on a EWMH-compliant WM. detect-rounded-corners = true; # Detect rounded corners and treat them as rectangular when --shadow-ignore-shaped is on. detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window # managers not passing _NET_WM_OPACITY of client windows to frame # Unredirect all windows if a full-screen opaque window is detected, to maximize performance for full-screen windows, like games. # Known to cause flickering when redirecting/unredirecting windows. # windows. refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto. vsync = "none"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc" # See man page for more details. dbe = false; # Enable DBE painting mode. Rarely needed. paint-on-overlay = true; # Painting on X Composite overlay window. Recommended. sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate. # Incompatible with certain VSync methods. unredir-if-possible = true; # Unredirect all windows if a full-screen opaque window is # detected, to maximize performance for full-screen windows. focus-exclude = [ ]; # A list of conditions of windows that should always be considered # focused. detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in # the same group focused at the same time. detect-client-leader = false; # Use WM_CLIENT_LEADER to group windows. invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
# GLX backend # GLX backend fine-tune options. See man page for more info. glx-no-stencil = true; # Recommended. glx-copy-from-front = false; # Useful with --glx-swap-method, # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync. # glx-no-rebind-pixmap = true; # Recommended if it works. glx-swap-method = "undefined"; # See man page.
# Window type settings wintypes: { tooltip = { fade = true; shadow = false; opacity = 0.75; focus = true; }; # fade: Fade the particular type of windows. # shadow: Give those windows shadow # opacity: Default opacity for the type of windows. # focus: Whether to always consider windows of this type focused. };
LxPanel: Barra do Topo;
Tint2: Escondido. Para colocar a borda branca no LxPanel.
Cairo-Dock
Editado pela última vez por yuryrodrigues em Seg, 11 de Novembro 2013, 22:41, em um total de 1 vez.
Entretanto, Luís, o Painel acho que ficou bem melhor com essa linha mais clara. Gostei também da abordagem diferente do tema. Apesar de não ser o mesmo tema, talvez se enquadre melhor no conjunto visual.
Agora vamos aos pormenores:
o applet das áreas de trabalho permite pô-lo mais pequeno? Acho que ficaria mais bonito, 1px mais pequeno. No caso do mockup, ele tem uma margem de 1 px à volta.
o fundo luminoso das aplicações abertas no painel lateral ficaria bem interessante!
Fontes light à lá Metro. Open Sans light talvez fossem a melhor escolha!
De resto, está bastante bom. Já nem tenho grandes coisas a dizer e até tenho medo de tentar fazer a minha abordagem, coisa que eu queria fazer hoje quando chegasse a casa
Eu já não vou partilhar mais alguma versão, tenho a vista cansada e tenho de a descansar para amanhã a usar no trabalho!
Respondendo aos teus pormenores:
Não dá, isso depende do tema...
Se o AWN não tivesse sido abandonado e não tivesse sido retirado do Debian por incumprimento dos requisitos (funcionar e ser estável), poderia apresentar algo mais desse género...
Estas são a Open Sans Regular, porque quando usei a Light até os olhos me começaram a arder tal era a dificuldade em ler...
Faz e partilha! Fico ansioso por ver o resultado
«Escolhe um trabalho de que gostes, e não terás que trabalhar um só dia na tua vida» - Confúcio
por Luis Cardoso » Seg, 11 de Novembro 2013, 20:26 
Windows 9 - Vol 2 
