Este é um conjunto de visuais diversificado, onde encontrará ambientes gráficos diferentes, desde o comum Unity até ao Gnome-Shell, Pantheon e até sessões personalizadas! Para além disso, as personalizações frequentes nesta série continuam a aparecer, nomeadamente temas GTK, conjuntos de ícones, Wallpapers e, claro, o configurações do Conky.
Como funciona esta série?
Esta série só existe porque os leitores do Ubuntued participam de forma ativa para a manter ao mais alto nível! Por esse simples motivo a sua participação é muito importante! Como você pode participar? Muito simples, visite esta página que disponibiliza uma aplicação (ver imagem abaixo) para agilizar o processo de partilha! E depois partilhe o seu visual aqui:
Como é já comum nos outros artigos desta série, cada visual apresentado neste artigo é da responsabilidade do seu Autor. Quer isto dizer que, se tem alguma questão sobre esse visual, o melhor será você questionar diretamente o Autor ou então em resposta ao post que foi originalmente apresentado por esse Autor.
Para esse efeito, em cada um dos visuais apresentados neste artigo, você tem a oportunidade de ver a descrição redigida pelos Autores, o link para o local original desse ambiente (que você pode e deve aceder para questionar algo), link direto para a página do utilizador para o questionar diretamente. Relativamente às imagens tridimensionais apresentadas em algumas das participações, se você quiser ver com melhor definição os screenshots originais deverá visitar o link do local original, intitulado: “Página deste ambiente“.
--==============================================================================
-- seamod_rings.lua
--
-- Date : 05/02/2012
-- Author : SeaJey
-- Version : v0.1
-- License : Distributed under the terms of GNU GPL version 2 or later
--
-- This version is a modification of lunatico_rings.lua wich is modification of conky_orange.lua
--
-- conky_orange.lua: http://gnome-look.org/content/show.php?content=137503&forumpage=0
-- lunatico_rings.lua: http://gnome-look.org/content/show.php?content=142884
--==============================================================================
-------------------------------------------------------------------------------
-- rgb_to_r_g_b
-- converts color in hexa to decimal
--
function rgb_to_r_g_b(colour, alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end
-------------------------------------------------------------------------------
-- angle_to_position
-- convert degree to rad and rotate (0 degree is top/north)
--
function angle_to_position(start_angle, current_angle)
local pos = current_angle + start_angle
return ( ( pos * (2 * math.pi / 360) ) - (math.pi / 2) )
end
-------------------------------------------------------------------------------
-- draw_gauge_ring
-- displays gauges
--
function draw_gauge_ring(display, data, value)
local max_value = data['max_value']
local x, y = data['x'], data['y']
local graph_radius = data['graph_radius']
local graph_thickness, graph_unit_thickness = data['graph_thickness'], data['graph_unit_thickness']
local graph_start_angle = data['graph_start_angle']
local graph_unit_angle = data['graph_unit_angle']
local graph_bg_colour, graph_bg_alpha = data['graph_bg_colour'], data['graph_bg_alpha']
local graph_fg_colour, graph_fg_alpha = data['graph_fg_colour'], data['graph_fg_alpha']
local hand_fg_colour, hand_fg_alpha = data['hand_fg_colour'], data['hand_fg_alpha']
local graph_end_angle = (max_value * graph_unit_angle) % 360
-- background ring
cairo_arc(display, x, y, graph_radius, angle_to_position(graph_start_angle, 0), angle_to_position(graph_start_angle, graph_end_angle))
cairo_set_source_rgba(display, rgb_to_r_g_b(graph_bg_colour, graph_bg_alpha))
cairo_set_line_width(display, graph_thickness)
cairo_stroke(display)
-- arc of value
local val = value % (max_value + 1)
local start_arc = 0
local stop_arc = 0
local i = 1
while i <= val do
start_arc = (graph_unit_angle * i) - graph_unit_thickness
stop_arc = (graph_unit_angle * i)
cairo_arc(display, x, y, graph_radius, angle_to_position(graph_start_angle, start_arc), angle_to_position(graph_start_angle, stop_arc))
cairo_set_source_rgba(display, rgb_to_r_g_b(graph_fg_colour, graph_fg_alpha))
cairo_stroke(display)
i = i + 1
end
local angle = start_arc
-- graduations marks
local graduation_radius = data['graduation_radius']
local graduation_thickness, graduation_mark_thickness = data['graduation_thickness'], data['graduation_mark_thickness']
local graduation_unit_angle = data['graduation_unit_angle']
local graduation_fg_colour, graduation_fg_alpha = data['graduation_fg_colour'], data['graduation_fg_alpha']
if graduation_radius > 0 and graduation_thickness > 0 and graduation_unit_angle > 0 then
local nb_graduation = graph_end_angle / graduation_unit_angle
local i = 0
while i < nb_graduation do
cairo_set_line_width(display, graduation_thickness)
start_arc = (graduation_unit_angle * i) - (graduation_mark_thickness / 2)
stop_arc = (graduation_unit_angle * i) + (graduation_mark_thickness / 2)
cairo_arc(display, x, y, graduation_radius, angle_to_position(graph_start_angle, start_arc), angle_to_position(graph_start_angle, stop_arc))
cairo_set_source_rgba(display,rgb_to_r_g_b(graduation_fg_colour,graduation_fg_alpha))
cairo_stroke(display)
cairo_set_line_width(display, graph_thickness)
i = i + 1
end
end
-- text
local txt_radius = data['txt_radius']
local txt_weight, txt_size = data['txt_weight'], data['txt_size']
local txt_fg_colour, txt_fg_alpha = data['txt_fg_colour'], data['txt_fg_alpha']
local movex = txt_radius * math.cos(angle_to_position(graph_start_angle, angle))
local movey = txt_radius * math.sin(angle_to_position(graph_start_angle, angle))
cairo_select_font_face (display, "ubuntu", CAIRO_FONT_SLANT_NORMAL, txt_weight)
cairo_set_font_size (display, txt_size)
cairo_set_source_rgba (display, rgb_to_r_g_b(txt_fg_colour, txt_fg_alpha))
cairo_move_to (display, x + movex - (txt_size / 2), y + movey + 3)
cairo_show_text (display, value)
cairo_stroke (display)
-- caption
local caption = data['caption']
local caption_weight, caption_size = data['caption_weight'], data['caption_size']
local caption_fg_colour, caption_fg_alpha = data['caption_fg_colour'], data['caption_fg_alpha']
local tox = graph_radius * (math.cos((graph_start_angle * 2 * math.pi / 360)-(math.pi/2)))
local toy = graph_radius * (math.sin((graph_start_angle * 2 * math.pi / 360)-(math.pi/2)))
cairo_select_font_face (display, "ubuntu", CAIRO_FONT_SLANT_NORMAL, caption_weight);
cairo_set_font_size (display, caption_size)
cairo_set_source_rgba (display, rgb_to_r_g_b(caption_fg_colour, caption_fg_alpha))
cairo_move_to (display, x + tox + 5, y + toy + 1)
-- bad hack but not enough time !
if graph_start_angle < 105 then
cairo_move_to (display, x + tox - 30, y + toy + 1)
end
cairo_show_text (display, caption)
cairo_stroke (display)
end
-------------------------------------------------------------------------------
-- go_gauge_rings
-- loads data and displays gauges
--
function go_gauge_rings(display)
local function load_gauge_rings(display, data)
local str, value = '', 0
str = string.format('${%s %s}',data['name'], data['arg'])
str = conky_parse(str)
value = tonumber(str)
draw_gauge_ring(display, data, value)
end
for i in pairs(gauge) do
load_gauge_rings(display, gauge[i])
end
end
-------------------------------------------------------------------------------
-- MAIN
function conky_main()
if conky_window == nil then
return
end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
local display = cairo_create(cs)
local updates = conky_parse('${updates}')
update_num = tonumber(updates)
if update_num > 5 then
go_gauge_rings(display)
end
#==============================================================================
# conkyrc_seamod
# Date : 05/02/2012
# Author : SeaJey
# Version : v0.1
# License : Distributed under the terms of GNU GPL version 2 or later
#
# This version is a modification of conkyrc_lunatico wich is modification of conkyrc_orange
#
# conkyrc_orange: http://gnome-look.org/content/show.php?content=137503&forumpage=0
# conkyrc_lunatico: http://gnome-look.org/content/show.php?content=142884
#==============================================================================
# Loading lua script for drawning rings
lua_load ~/.conky/seamod_rings.lua
lua_draw_hook_post main
## System information using conky capabilities
# Header with base system info
TEXT
${font Ubuntu:size=10,weight:bold}${color4}SISTEMA ${hr 2}
${offset 15}${font Ubuntu:size=10,weight:normal}${color1}$sysname $kernel
${offset 15}${font Ubuntu:size=10,weight:normal}${color1}$nodename
${offset 15}${font Ubuntu:size=10,weight:normal}${color1}Uptime: $uptime
# Showing CPU Graph
${voffset 0}
${offset 150}${cpugraph 40,150 666666 666666}${voffset -25}
${offset 90}${font Ubuntu:size=10,weight:bold}${color5}CPU
# Showing TOP 5 CPU-consumers
${offset 105}${font Ubuntu:size=10,weight:normal}${color4}${top name 1}${alignr}${top cpu 1}%
${offset 105}${font Ubuntu:size=10,weight:normal}${color1}${top name 2}${alignr}${top cpu 2}%
${offset 105}${font Ubuntu:size=10,weight:normal}${color2}${top name 3}${alignr}${top cpu 3}%
${offset 105}${font Ubuntu:size=10,weight:normal}${color3}${top name 4}${alignr}${top cpu 4}%
${offset 105}${font Ubuntu:size=10,weight:normal}${color3}${top name 5}${alignr}${top cpu 5}%
#Showing memory part with TOP 5
${voffset -5}
${offset 150}${memgraph 40,150 666666 666666}${voffset -25}
${offset 90}${font Ubuntu:size=10,weight:bold}${color5}MEM
${offset 105}${font Ubuntu:size=10,weight:normal}${color4}${top_mem name 1}${alignr}${top_mem mem 1}%
${offset 105}${font Ubuntu:size=10,weight:normal}${color1}${top_mem name 2}${alignr}${top_mem mem 2}%
${offset 105}${font Ubuntu:size=10,weight:normal}${color2}${top_mem name 3}${alignr}${top_mem mem 3}%
${offset 105}${font Ubuntu:size=10,weight:normal}${color3}${top_mem name 4}${alignr}${top_mem mem 4}%
${offset 105}${font Ubuntu:size=10,weight:normal}${color3}${top_mem name 4}${alignr}${top_mem mem 5}%
settings_table = {
{
-- Edit this table to customise your rings.
-- You can create more rings simply by adding more elements to settings_table.
-- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
name='time',
-- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
arg='%I.%M',
-- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
max=12,
-- "bg_colour" is the colour of the base ring.
bg_colour=0xffffff,
-- "bg_alpha" is the alpha value of the base ring.
bg_alpha=0.1,
-- "fg_colour" is the colour of the indicator part of the ring.
fg_colour=0xFF6600,
-- "fg_alpha" is the alpha value of the indicator part of the ring.
fg_alpha=0.2,
-- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
x=100, y=150,
-- "radius" is the radius of the ring.
radius=50,
-- "thickness" is the thickness of the ring, centred around the radius.
thickness=5,
-- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
start_angle=0,
-- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
end_angle=360
},
{
name='time',
arg='%M.%S',
max=60,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xFF6600,
fg_alpha=0.4,
x=100, y=150,
radius=56,
thickness=5,
start_angle=0,
end_angle=360
},
{
name='time',
arg='%S',
max=60,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xFF6600,
fg_alpha=0.6,
x=100, y=150,
radius=62,
thickness=5,
start_angle=0,
end_angle=360
},
{
name='time',
arg='%d',
max=31,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=100, y=150,
radius=70,
thickness=5,
start_angle=-90,
end_angle=90
},
{
name='time',
arg='%m',
max=12,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xFF6600,
fg_alpha=1,
x=100, y=150,
radius=76,
thickness=5,
start_angle=-90,
end_angle=90
},
{
name='cpu',
arg='cpu0',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=50, y=300,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='memperc',
arg='',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=75, y=350,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='swapperc',
arg='',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=100, y=400,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='fs_used_perc',
arg='/',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=125, y=450,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='downspeedf',
arg='eth0',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=150, y=500,
radius=25,
thickness=4,
start_angle=-90,
end_angle=180
},
{
name='upspeedf',
arg='eth0',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=150, y=500,
radius=20,
thickness=4,
start_angle=-90,
end_angle=180
},
}
-- Use these settings to define the origin and extent of your clock.
clock_r=65
-- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.
function draw_ring(cr,t,pt)
local w,h=conky_window.width,conky_window.height
local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']
local angle_0=sa*(2*math.pi/360)-math.pi/2
local angle_f=ea*(2*math.pi/360)-math.pi/2
local t_arc=t*(angle_f-angle_0)
-- Check that Conky has been running for at least 5s
if conky_window==nil then return end
local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
local cr=cairo_create(cs)
local updates=conky_parse('${updates}')
update_num=tonumber(updates)
if update_num>5 then
for i in pairs(settings_table) do
setup_rings(cr,settings_table[i])
end
end
# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0
# Create own window instead of using desktop (required in nautilus)
own_window_class Conky
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 300 0
maximum_width 1000
# Draw shades?
draw_shades no
default_color ffffff #4D4D4D
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
draw_graph_borders no
# border width
border_width 0
# Text alignment, other possible values are commented
#alignment top_left
#alignment top_middle
alignment top_right
#alignment bottom_left
#alignment bottom_middle
#alignment bottom_right
# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 60
gap_y 30
color0 888
imlib_cache_size 0
TEXT
${color DDD}${font Bebas - U:pixelsize=70}${time %H : %M : %S}${font}${voffset -20}${offset 10}${font Bebas - U:pixelsize=20}${time %p}${font}
${voffset 10}${offset 120}${font Open Sans Semibold - U:pixelsize=20}${time %A, %d de %B}${font}
${voffset -26}${offset 40}${font Bebas - U:pixelsize=32}${time %Y}${font}
335363 Respostashttp%3A%2F%2Fubuntued.info%2Fambientes-de-trabalho-dos-leitores-106Ambientes+de+trabalho+dos+leitores+%231062013-06-16+13%3A44%3A03Cl%C3%A1udio+Novaishttp%3A%2F%2Fubuntued.info%2F%3Fp%3D33536 ate agora.
Os visuais têm os nomes dos temas e icones utilizados. É só procurar por esses temas (ou clicar nos links quando existem) e instalar.
Se não está confortável a instalar sozinho um tema, sugiro vivamente que comece a aplicar os temas apresentados nesta série pois a explicação das instalações é minuciosa:
O site Ubuntued está sob a licença CC (Creative Commons). Significa então, que as técnicas apresentadas neste site pertencem aos seus autores e podem ser utilizadas em qualquer situação.
Relativamente ao conteúdo em si, pode ser partilhado livremente, copiado para fins não lucrativos e com a condição de referenciar o autor através de um link para o artigo original.
Para mais informações sobre a licença dos conteúdos apresentados no Ubuntued, clique aqui ou na imagem acima.
Escreva para o Ubuntued
Tem um artigo interessante e importante para a comunidade?
Então considere publicar o seu trabalho no Ubuntued pois, através dele, ganhará exposição e o seu trabalho será reconhecido não só pelos milhares subscritores, mas também pelos milhares de leitores que visitam o Ubuntued e o Planeta Ubuntu Brasil.
O Ubuntued foi criado exclusivamente para VOCÊ, por isso, se tem sugestões de novos artigos ou de como melhorar a experiência dos leitores no nosso site, considere contactar-nos!
Se quer ver um determinado tema a ser analisado no Ubuntued, ou criou um novo software open-source, ou apenas quer ser esclarecido sobre uma determinada área, não hesite em contactar-nos.
Nós certamente tentaremos ajudar da melhor maneira.
Lembrando que a maioria dos temas podem ser encontrados no site do devianart
Como se faz para copiar e utilizar um tema dos que foram mostrados?
Os visuais têm os nomes dos temas e icones utilizados. É só procurar por esses temas (ou clicar nos links quando existem) e instalar.
Se não está confortável a instalar sozinho um tema, sugiro vivamente que comece a aplicar os temas apresentados nesta série pois a explicação das instalações é minuciosa: