Leitores 101

Neste 101º artigo da Série de Ambientes de Trabalho dos Leitores do Ubuntued apresentamos-lhe 19 ambientes trabalho submetidos pelos utilizadores do Fórum do Ubuntued.

Este conjunto de visuais mostra alguma diversidade de sistemas visuais, não se centrando apenas no Unity. Há vários ambientes XFCE, mas não só. Acompanhados com esses visuais base, há várias docks e conkys que embelezam o ambiente de trabalho. Venha conhecer estes ambientes e respetivos temas!

 

Como funciona esta série?

Esta série só existe porque os leitores do Ubuntued participam de forma ativa para a manter ao mais alto nível! Por esse simples motivo a sua participação é muito importante! Como você pode participar? Muito simples, visite esta página que disponibiliza uma aplicação (ver imagem abaixo) para agilizar o processo de partilha! E depois partilhe o seu visual aqui:

Fórum do Ubuntued: Mostre o seu Desktop!

Ubuntued-Deskmod

Como está feito este artigo?

Como é já comum nos outros artigos desta série, cada visual apresentado neste artigo é da responsabilidade do seu Autor. Quer isto dizer que, se tem alguma questão sobre esse visual, o melhor será você questionar diretamente o Autor ou então em resposta ao post que foi originalmente apresentado por esse Autor.

Para esse efeito, em cada um dos visuais apresentados neste artigo, você tem a oportunidade de ver a descrição redigida pelos Autores, o link para o local original desse ambiente (que você pode e deve aceder para questionar algo), link direto para a página do utilizador para o questionar diretamente. Relativamente às imagens tridimensionais apresentadas em algumas das participações, se você quiser ver com melhor definição os screenshots originais deverá visitar o link do local original, intitulado: “Página deste ambiente”.

Arch Away

width="407"

O Tirgre E O Dragão

width="312"width="312"

Suave

width="312"width="312"

Lights Of The Colossus

width="312"width="312"

3D Desktop

  • Página do Ambiente de Trabalho
  • Autor: esiemann
  • Sistema Operativo: Ubuntu 13.04
  • Tema: Uncomplicated
  • Ambiente Gráfico: Gnome-Clássico (Sem efeitos)
  • Ícones: Nitrux-Buttons
  • Wallpaper: Cor preta(transparente)
  • Compiz: Cubo Transparente(90%) + Plugin Wallpaper + Skydome
  • Cairo-Dock: Barra lateral esquerda = Menu, lançadores, programas e lixeira

width="312"width="312"
width="312"width="312"

Ubuntu Girl

width="312"width="312"

Abstrat

width="625"

Mint 14

  • Página do Ambiente de Trabalho
  • Autor: Scarface
  • Sistema Operativo: Linux Mint 14
  • Ambiente Gráfico: Mate
  • Ícones: Awoken
  • Outros: AWN; Conky
    Código: Selecionar todos
    background yes
    use_xft yes
    xftfont Storopia:size=9
    xftalpha 0.8
    update_interval 0.5
    total_run_times 0
    own_window yes
    own_window_type override
    own_window_transparent yes
    own_window_colour black
    own_window_hints undecorated,skip_pager,skip_taskbar
    double_buffer yes
    minimum_size 1024 5 #change the minimum size here to your screen resolution
    draw_shades no
    draw_outline no
    draw_borders no
    draw_graph_borders no
    stippled_borders 0
    border_margin 4
    border_width 0
    default_color white
    default_shade_color black
    default_outline_color black
    alignment top_left
    gap_x 140
    gap_y 150
    no_buffers yes
    uppercase no
    cpu_avg_samples 1
    net_avg_samples 1
    override_utf8_locale yes
    use_spacer yes
    mpd_host localhost
    mpd_portPort 6060
    #mpd_password

    TEXT
    ${alignc}${font}${color 8faeae}CPU: ${font}${color cdcdcd}$cpu%   ${execi 2 sensors | grep “Core 0″ | cut -c16-21}C  |  ${font}${color 8faeae}RAM: ${font}${color cdcdcd}$memperc%  |  ${font}${color 8faeae}SWAP: ${font}${color cdcdcd}$swapperc%  |  ${font}${color 8faeae}HDD: ${font}${color cdcdcd}${fs_free /} / ${fs_size /}  |  ${font}${color 8faeae}PROCESSES: ${font}${color cdcdcd}$processes  |  ${font}${color 8faeae}RUNNING: ${font}${color cdcdcd}$running_processes  |  ${font}${color 8faeae}UPTIME: ${font}${color cdcdcd}$uptime

    ${if_running rhythmbox}
    ${alignc}${font}${color 8faeae}ARTIST: ${font}${color cdcdcd}${exec rhythmbox-client –no-start –print-playing-format %aa}  |  ${font}${color 8faeae}TITLE: ${font}${color cdcdcd}${exec rhythmbox-client –no-start –print-playing-format %tt}  |  ${font}${color 8faeae}ALBUM: ${font}${color cdcdcd}${exec rhythmbox-client –no-start –print-playing-format %at}  |  ${font}${color 8faeae}TIME: ${font}${color cdcdcd}${exec rhythmbox-client –print-playing-format “%te / %td”}
    ${else}
    ${alignc}${font}${color 8faeae}ARTIST: ${font}${color cdcdcd}-  |  ${font}${color 8faeae}TITLE: ${font}${color cdcdcd}-  |  ${font}${color 8faeae}ALBUM: ${font}${color cdcdcd}-  |  ${font}${color 8faeae}TIME: ${font}${color cdcdcd}-
    ${endif}
    ${font Storopia:size=13}${color 8faeae}${alignc}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ LPPT temperature}ºC ${font Storopia:size=13}${color cdcdcd} Lisboa

    ${font Storopia:size=30}${color cdcdcd}${alignc}${time %A}, ${time %e} de ${time %B}
    ${font Storopia:size=40}${color cdcdcd}${alignc}${time %k:%M:%S}

width="407"

Science

width="407"

Laranja Destorcido

width="625"

Simples E Versátil

width="312"width="312"

Meu Xubuntu

  • Página do Ambiente de Trabalho
  • Autor: miles_maverick
  • Sistema Operativo: Xubuntu 13.04
  • Tema: Bluebird
  • Ícones: Padrão
  • Wallpaper: 163 (do projeto .365 do bo0xvn)
  • Outros: gmusicbrowser, Docky, Firefox, Localizador de aplicativos, Composição do XFCE
  • Composição: Sombras, transparência
  • Painel: 75% alpha, 91% fora e 94% dentro

width="625"

Whitex

width="625"

Xfce – Ubuntued.

width="407"

Negro

  • Página do Ambiente de Trabalho
  • Autor: joao
  • Sistema Operativo: Ubuntu 13.04
  • Tema: Zoncolorxtra-Redmond
  • Ambiente Gráfico: Unity
  • Ícones: Myhumanity
  • Outros:
    • Ficheiro “.conkyrc”:
      Código: Selecionar todos
      ####################################################
      #    Conky Theme : Infinity                        #
      #    Created by     : Harshit Yadav                #
      #    Version           : 1.0                    #
      #    Feel Free to distribute                        #
      #    For Installation Instrcutions See Read Me     #
      #                                                  #
      #    Modified by : http://www.NoobsLab.com         #
      ####################################################

      # Conky settings #
      background yes
      update_interval 1

      cpu_avg_samples 2
      net_avg_samples 2

      override_utf8_locale yes

      double_buffer yes
      no_buffers yes

      text_buffer_size 2048
      #imlib_cache_size 0

      temperature_unit celsius

      # Window specifications #

      own_window yes
      own_window_type conky
      own_window_transparent yes
      own_window_argb_visual yes
      own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below

      border_inner_margin 0
      border_outer_margin 0

      ## This Resolution is set according to the sreen resolution of 1366×768
      ## Adjust Accoring to yours

      minimum_size 800 560
      maximum_width 1366

      alignment tr
      gap_x 10
      gap_y 55

      # Graphics settings #
      draw_shades no
      draw_outline no
      draw_borders no
      draw_graph_borders no

      # Text settings #
      use_xft yes
      xftfont caviar dreams:size=8
      xftalpha 0.5

      uppercase no

      temperature_unit celsius

      default_color FFFFFF

      # Lua Load  #
      lua_load ~/.lua/scripts/haunted.lua
      lua_draw_hook_pre clock_rings

      ## Adjust these fields according to the your screen size i have modded them for 1366X768

      TEXT
      ${offset 700}${color EAEAEA}${font GE Inspira:pixelsize=120}${time %H:%M}${font}${voffset -84}${voffset 10}${color FFA300}${font GE Inspira:pixelsize=42}${time %d} ${voffset -15}${color EAEAEA}${font GE Inspira:pixelsize=22}${time  %B} ${time %Y}${font}${voffset 124}${font GE Inspira:pixelsize=58}${offset -800}${time %A}${font}
      ${offset 720}${voffset -100}${font Ubuntu:pixelsize=10}${color FFA300}HD ${offset 9}$color${fs_free /} / ${fs_size /}${offset 30}${color FFA300}RAM ${offset 9}$color$mem / $memmax${offset 30}${color FFA300}CPU ${offset 9}$color${cpu cpu0}%
      ${voffset 10}${offset 270}${color 2c2c2c}${hr 4}
      ${image ~/.conky/rev-eng.png}

      ${offset 130}${voffset 230}${font Santana:size=9:style=Bold}root : ${font Santana:size=9}${fs_used /}/${fs_size /}

      ${offset 130}${voffset -1}${color ffffff}${font Santana:size=9:style=Bold}swap: ${font Santana:size=8} ${swap} / ${swapfree}$font
      ${offset 570}${voffset -110} ${color EAEAEA}Linux ${kernel} kernel
      ${offset 570}${voffset 5} Uptime :${uptime}
      ${offset 825}${voffset -80}${color ffffff}${font Santana:size=10:style=Bold}${exec whoami}@${nodename}
      ${offset 825}${voffset 0}${color ffffff}${font Santana:size=8}${top name 5} ${top mem 5}

      ${offset 705}${voffset 130}${color ffffff}${font Santana:size=8}IP Address :${addr eth0}
      ${offset 705}${voffset 10}${color ffffff}${font Santana:size=8}Down :${downspeed eth0} k/s ${offset 8}Up:${upspeed eth0} k/s
      ${offset 705}${voffset 10}${color ffffff}${font Santana:size=8}Speed Graph :
      ${offset 705}${voffset -10}${color ffffff}${font Santana:size=8}${color #000000}${downspeedgraph eth0 32,150 000000 ffffff} ${color #000000}${upspeedgraph eth0 32,150 000000 ffffff}

    • Ficheiro “haunted.lua”:
      Código: Selecionar todos
      --[[
      Infinity by Harshit
      original by someone i can't remeber the name
      This script draws the left rings of the screen that is with the clock

      To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
      lua_load ~/scripts/haunted.lua
      lua_draw_hook_pre ring_stats

      Changelog:
      + v1.0 -- Original release (07/06/2012)
      ]]

      settings_table = {
      {
      -- Edit this table to customise your rings.
      -- You can create more rings simply by adding more elements to settings_table.
      -- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
      name='time',
      -- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
      arg='%I.%M',
      -- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
      max=12,
      -- "bg_colour" is the colour of the base ring.
      bg_colour=0xffffff,
      -- "bg_alpha" is the alpha value of the base ring.
      bg_alpha=0.1,
      -- "fg_colour" is the colour of the indicator part of the ring.
      fg_colour=0xffffff,
      -- "fg_alpha" is the alpha value of the indicator part of the ring.
      fg_alpha=0.2,
      -- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
      x=165, y=170,
      -- "radius" is the radius of the ring.
      radius=50,
      -- "thickness" is the thickness of the ring, centred around the radius.
      thickness=5,
      -- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
      start_angle=0,
      -- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger (e.g. more clockwise) than start_angle.
      end_angle=360
      },
      {
      name='time',
      arg='%M.%S',
      max=60,
      bg_colour=0xffffff,
      bg_alpha=0.1,
      fg_colour=0x4a89a7,
      fg_alpha=0.4,
      x=165, y=170,
      radius=56,
      thickness=5,
      start_angle=0,
      end_angle=360
      },
      {
      name='time',
      arg='%S',
      max=60,
      bg_colour=0xffffff,
      bg_alpha=0.1,
      fg_colour=0xe83737,
      fg_alpha=0.6,
      x=165, y=170,
      radius=62,
      thickness=5,
      start_angle=0,
      end_angle=360
      },
      {
      name='cpu',
      arg='cpu1',
      max=100,
      bg_colour=0xffffff,
      bg_alpha=0,
      fg_colour=0xffffff,
      fg_alpha=0.1,
      x=165, y=170,
      radius=70,
      thickness=5,
      start_angle=60,
      end_angle=120
      },
      {
      name='battery_percent',
      arg='BAT1',
      max=100,
      bg_colour=0xffffff,
      bg_alpha=0.1,
      fg_colour=0xebff46,
      fg_alpha=0.6,
      x=165, y=170,
      radius=72,
      thickness=11,
      start_angle=122,
      end_angle=210
      },
      {
      name='memperc',
      arg='',
      max=100,
      bg_colour=0xffffff,
      bg_alpha=0.1,
      fg_colour=0x46a646,
      fg_alpha=0.8,
      x=165, y=170,
      radius=83.5,
      thickness=8,
      start_angle=122,
      end_angle=210
      },
      {
      name='time',
      arg='%d',
      max=31,
      bg_colour=0xffffff,
      bg_alpha=0.1,
      fg_colour=0xebff46,
      fg_alpha=0.8,
      x=165, y=170,
      radius=70,
      thickness=5,
      start_angle=212,
      end_angle=360
      },
      {
      name='time',
      arg='%m',
      max=12,
      bg_colour=0xffffff,
      bg_alpha=0.1,
      fg_colour=0xf4732d,
      fg_alpha=0.8,
      x=165, y=170,
      radius=76,
      thickness=5,
      start_angle=212,
      end_angle=360
      },
      {
      name='memperc',
      arg='%m',
      max=100,
      bg_colour=0xb7b7b7,
      bg_alpha=0.5,
      fg_colour=0x2c2c2c,
      fg_alpha=1.0,
      x=165, y=170,
      radius=120,
      thickness=17,
      start_angle=-90,
      end_angle=30
      },
      {
      name='',
      arg='',
      max=100,
      bg_colour=0xb7b7b7,
      bg_alpha=0.2,
      fg_colour=0x2c2c2c,
      fg_alpha=1.0,
      x=165, y=170,
      radius=116,
      thickness=17,
      start_angle=82,
      end_angle=180
      },
      {
      name='fs_used_perc',
      arg='/home',
      max=100,
      bg_colour=0xffffff,
      bg_alpha=0.5,
      fg_colour=0xffffff,
      fg_alpha=0.6,
      x=165, y=170,
      radius=95,
      thickness=5,
      start_angle=0,
      end_angle=90
      },
      }

      clock_r=125

      clock_x=165
      clock_y=170

      clock_colour=0xffffff
      clock_alpha=0.5

      show_seconds=true

      require 'cairo'

      function rgb_to_r_g_b(colour,alpha)
      return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
      end

      function draw_ring(cr,t,pt)
      local w,h=conky_window.width,conky_window.height

      local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
      local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

      local angle_0=sa*(2*math.pi/360)-math.pi/2
      local angle_f=ea*(2*math.pi/360)-math.pi/2
      local t_arc=t*(angle_f-angle_0)

      cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
      cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
      cairo_set_line_width(cr,ring_w)
      cairo_stroke(cr)

      cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
      cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
      cairo_stroke(cr)
      end

      function draw_clock_hands(cr,xc,yc)
      local secs,mins,hours,secs_arc,mins_arc,hours_arc
      local xh,yh,xm,ym,xs,ys

      secs=os.date("%S")
      mins=os.date("%M")
      hours=os.date("%I")

      secs_arc=(2*math.pi/60)*secs
      mins_arc=(2*math.pi/60)*mins+secs_arc/60
      hours_arc=(2*math.pi/12)*hours+mins_arc/12

      xh=xc+0.7*clock_r*math.sin(hours_arc)
      yh=yc-0.7*clock_r*math.cos(hours_arc)
      cairo_move_to(cr,xc,yc)
      cairo_line_to(cr,xh,yh)

      cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
      cairo_set_line_width(cr,5)
      cairo_set_source_rgba(cr,rgb_to_r_g_b(clock_colour,clock_alpha))
      cairo_stroke(cr)

      xm=xc+clock_r*math.sin(mins_arc)
      ym=yc-clock_r*math.cos(mins_arc)
      cairo_move_to(cr,xc,yc)
      cairo_line_to(cr,xm,ym)

      cairo_set_line_width(cr,3)
      cairo_stroke(cr)

      if show_seconds then
      xs=xc+clock_r*math.sin(secs_arc)
      ys=yc-clock_r*math.cos(secs_arc)
      cairo_move_to(cr,xc,yc)
      cairo_line_to(cr,xs,ys)

      cairo_set_line_width(cr,1)
      cairo_stroke(cr)
      end
      end

      function conky_clock_rings()
      local function setup_rings(cr,pt)
      local str=''
      local value=0

      str=string.format('${%s %s}',pt['name'],pt['arg'])
      str=conky_parse(str)

      value=tonumber(str)
      if value == nil then value = 0 end
      pct=value/pt['max']

      draw_ring(cr,pct,pt)
      end

      if conky_window==nil then return end
      local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)

      local cr=cairo_create(cs)

      local updates=conky_parse('${updates}')
      update_num=tonumber(updates)

      if update_num>5 then
      for i in pairs(settings_table) do
      setup_rings(cr,settings_table[i])
      end
      end

      draw_clock_hands(cr,clock_x,clock_y)
      end

      --[[ RING WIDGET ]]
      --[[ Options (name, arg, max, bg_colour, bg_alpha, xc, yc, radius, thickness, start_angle, end_angle):
      "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
      "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
      "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
      "bg_colour" is the colour of the base ring.
      "bg_alpha" is the alpha value of the base ring.
      "fg_colour" is the colour of the indicator part of the ring.
      "fg_alpha" is the alpha value of the indicator part of the ring.
      "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
      "radius" is the radius of the ring.
      "thickness" is the thickness of the ring, centred around the radius.
      "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
      "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger (e.g. more clockwise) than start_angle. ]]

      function ring(cr, name, arg, max, bgc, bga, fgc, fga, xc, yc, r, t, sa, ea)
      local function rgb_to_r_g_b(colour,alpha)
      return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
      end

      local function draw_ring(pct)
      local angle_0=sa*(2*math.pi/360)-math.pi/2
      local angle_f=ea*(2*math.pi/360)-math.pi/2
      local pct_arc=pct*(angle_f-angle_0)

      -- Draw background ring

      cairo_arc(cr,xc,yc,r,angle_0,angle_f)
      cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
      cairo_set_line_width(cr,t)
      cairo_stroke(cr)

      -- Draw indicator ring

      cairo_arc(cr,xc,yc,r,angle_0,angle_0+pct_arc)
      cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
      cairo_stroke(cr)
      end

      local function setup_ring()
      local str = ''
      local value = 0

      str = string.format('${%s %s}', name, arg)
      str = conky_parse(str)

      value = tonumber(str)
      if value == nil then value = 0 end
      pct = value/max

      draw_ring(pct)
      end

      local updates=conky_parse('${updates}')
      update_num=tonumber(updates)

      if update_num>5 then setup_ring() end
      end

      --[[ END RING WIDGET ]]

width="625"

Dock

width="625"

Lion

width="625"

Olhos Verdes

width="625"

Aventador

width="407"

3 Respostas ate agora.

  1. AitonDMT diz:

    A MINT 14 ficou ótima! Parabéns ao autor!

    Se puder fazer um artigo sobre personalização no MINT para deixar como este agradeceremos muito! :p

  2. Guilherme Paganini diz:

    Muito bom! Acho massa quando lança novas versões do Ubuntu que a cada Domingo que acesso o Ubuntued pego uma dica… Fico mais de um mês ajustando meu sistema! hehehe

    Cláudio, não estou conseguindo logar no fórum. Tem como olhar se tem algo errado? Já tentei mandar email mas você não respondeu.

  3. Daronesi diz:

    A maioria ficaram muito bons! Parabéns a todos!!!

Deixe uma resposta a AitonDMT