leitores 60

Neste 60º artigo da Série de Ambientes de Trabalho dos leitores do Ubuntued, são apresentadas 26 excelentes submissões!

Neste conjunto de visuais enviados pelos leitores do Ubuntued, destaca-se o facto de a maioria ser Ubuntu e Kubuntu. Os ambientes KDE, tal como na semana passada, voltam a estar presentes mostrando a sua infinita personalização com transparências desfocadas. Para além disso, existe um vasto leque de diferentes conkys, uns complexos outros simplistas. Sem dúvida que é um excelente conjunto de visuais para você tirar ideias e aplicar ao seu Ubuntu!

 

Como funciona esta série?

Esta série só existe porque os leitores do Ubuntued participam de forma ativa para a manter ao mais alto nível! Por esse simples motivo a sua participação é muito importante! Como você pode participar? Muito simples, visite esta página que disponibiliza uma aplicação (ver imagem abaixo) para agilizar o processo de partilha! E depois partilhe o seu visual aqui:

Fórum do Ubuntued: Mostre o seu Desktop!

Ubuntued Desktop

Como está feito este artigo?

Como é já comum nos outros artigos desta série, cada visual apresentado neste artigo é da responsabilidade do seu Autor. Quer isto dizer que, se tem alguma questão sobre esse visual, o melhor será você questionar diretamente o Autor ou então em resposta ao post que foi originalmente apresentado por esse Autor.

Para esse efeito, em cada um dos visuais apresentados neste artigo, você tem a oportunidade de ver a descrição redigida pelos Autores, o link para o local original desse ambiente (que você pode e deve aceder para questionar algo), link direto para a página do utilizador para o questionar diretamente. Relativamente às imagens tridimensionais apresentadas em algumas das participações, se você quiser ver com melhor definição os screenshots originais deverá visitar o link do local original, intitulado: “Página deste ambiente”.

((ºº)) G And R ((ºº))

width="625"

((ºº)) Cat ((ºº))

width="625"

((ºº)) Lubuntu Ubuntued ((ºº))

width="625"

Kde Glass

width="312"width="312"

 

Sunset

width="312"width="312"

 

((ºº)) Et Estacionou Errado ((ºº))

width="625"

((ºº))Aston Martin Tron 2012 ((ºº))

width="625"

Sagres

width="407"

 

É Cedo

  • Página do Ambiente de Trabalho
  • Autor: Saresa
  • Sistema Operativo: Ubuntu 12.04 LTS Precise Pangolin
  • Interface: Unity
  • Tema GTK: Adwaita
  • Tema de janelas: Turrican
  • Ícones: gnome-wise
  • Wallpaper: whatsthelatest.net/Early_Blossom_ubuntu_1204_wallpaper.jpg
  • Conky: Baseado em: http://gnome-look.org/139024(contém os logotipos em .png para cada distribuição)
    Código: Selecionar todos
    # Conky settings #
    background no
    update_interval 1
    cpu_avg_samples 2
    net_avg_samples 2override_utf8_locale yesdouble_buffer yes
    no_buffers yestext_buffer_size 2048
    #imlib_cache_size 0temperature_unit celsius

    # Window specifications #

    own_window yes
    own_window_type override
    own_window_transparent yes
    own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below

    border_inner_margin 0
    border_outer_margin 0

    minimum_size 200 250
    maximum_width 200

    alignment tr
    gap_x 35
    gap_y 55

    # Graphics settings #
    draw_shades no
    draw_outline no
    draw_borders no
    draw_graph_borders no

    # Text settings #
    use_xft yes
    xftfont caviar dreams:size=8
    xftalpha 0.5

    uppercase no

    temperature_unit celsius

    default_color FFFFFF

    # Lua Load  #
    lua_load ~/.conky/clock_rings.lua
    lua_draw_hook_pre clock_rings

    TEXT
    ${voffset 8}${color ffffff}${font caviar dreams:size=16}${time %A}${font}${voffset -8}${alignr 50}${color FFFFFF}${font caviar dreams:size=38}${time %e}${font}
    ${color FFFFFF}${voffset -30}${color FFFFFF}${font caviar dreams:size=18}${time %b}${font}${voffset -3} ${color FFFFFF}${font caviar dreams:size=20}${time %Y}${font}${color ffffff}${hr}
    ${voffset 140}${font caviar dreams:size=10}${alignr} ${font}
    ${font caviar dreams:size=10}${alignr} ${font}
    #${font caviar dreams:size=12}${color FFFFFF}${alignr} ${execi 6 /usr/bin/sensors | grep [+] | cut -d”+” -f2 | cut -d”(” -f1}${font}
    #${font caviar dreams:size=12}${color FFFFFF}${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ LQBK temperature temperature 30}${font}
    ${image ~/.conky/new-ubuntu-logo.png -p 64,125 -s 70×20}

    ${color FFFFFF}${goto 25}${voffset 35}${cpu cpu0}%
    ${color ffffff}${goto 25}CPU
    ${color FFFFFF}${goto 50}${voffset 23}${memperc}%
    ${color ffffff}${goto 50}RAM
    ${color FFFFFF}${goto 75}${voffset 23}${swapperc}%
    ${color ffffff}${goto 75}Swap
    ${color FFFFFF}${goto 100}${voffset 23}${fs_used_perc /}%
    ${color ffffff}${goto 100}Disk
    ${color FFFFFF}${goto 125}${voffset 25}${downspeed eth1}
    ${color FFFFFF}${goto 125}${upspeed eth1}
    ${color ffffff}${goto 125}Net

    ${color FFFFFF}${font caviar dreams:size=8}Uptime: ${uptime_short}
    ${color FFFFFF}${font caviar dreams:size=8}Processes: ${processes}
    ${color FFFFFF}${font caviar dreams:size=8}Running: ${running_processes}

    ${color ffffff}${font caviar dreams:size=8}${alignr}${nodename}
    ${color ffffff}${font caviar dreams:size=8}${alignr}${pre_exec cat /etc/issue.net}  $machine
    ${color ffffff}${font caviar dreams:size=8}${alignr}Kernel: ${kernel}

    clock-rings:

    Código: Selecionar todos
    --[[
    Clock Rings by Linux Mint (2011) reEdited by despot77
    This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num>5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num>3; conversely if you update Conky every 0.5s, you should use update_num>10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
    lua_load ~/scripts/clock_rings.lua
    lua_draw_hook_pre clock_ringsChangelog:
    + v1.0 -- Original release (30.09.2009)
    v1.1p -- Jpope edit londonali1010 (05.10.2009)
    *v 2011mint -- reEdit despot77 (18.02.2011)
    ]]settings_table = {
    {
    -- Edit this table to customise your rings.
    -- You can create more rings simply by adding more elements to settings_table.
    -- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
    name='time',
    -- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
    arg='%I.%M',
    -- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
    max=12,
    -- "bg_colour" is the colour of the base ring.
    bg_colour=0xffffff,
    -- "bg_alpha" is the alpha value of the base ring.
    bg_alpha=0.1,
    -- "fg_colour" is the colour of the indicator part of the ring.
    fg_colour=0xffffff,
    -- "fg_alpha" is the alpha value of the indicator part of the ring.
    fg_alpha=0.2,
    -- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
    x=100, y=150,
    -- "radius" is the radius of the ring.
    radius=50,
    -- "thickness" is the thickness of the ring, centred around the radius.
    thickness=5,
    -- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
    start_angle=0,
    -- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
    end_angle=360
    },
    {
    name='time',
    arg='%M.%S',
    max=60,
    bg_colour=0xffffff,
    bg_alpha=0.1,
    fg_colour=0xffffff,
    fg_alpha=0.4,
    x=100, y=150,
    radius=56,
    thickness=5,
    start_angle=0,
    end_angle=360
    },
    {
    name='time',
    arg='%S',
    max=60,
    bg_colour=0xffffff,
    bg_alpha=0.1,
    fg_colour=0xffffff,
    fg_alpha=0.6,
    x=100, y=150,
    radius=62,
    thickness=5,
    start_angle=0,
    end_angle=360
    },
    {
    name='time',
    arg='%d',
    max=31,
    bg_colour=0xffffff,
    bg_alpha=0.1,
    fg_colour=0xffffff,
    fg_alpha=0.8,
    x=100, y=150,
    radius=70,
    thickness=5,
    start_angle=-90,
    end_angle=90
    },
    {
    name='time',
    arg='%m',
    max=12,
    bg_colour=0xffffff,
    bg_alpha=0.1,
    fg_colour=0xffffff,
    fg_alpha=0.95,
    x=100, y=150,
    radius=76,
    thickness=5,
    start_angle=-90,
    end_angle=90
    },
    {
    name='cpu',
    arg='cpu0',
    max=100,
    bg_colour=0xffffff,
    bg_alpha=0.2,
    fg_colour=0xffffff,
    fg_alpha=0.8,
    x=50, y=300,
    radius=25,
    thickness=5,
    start_angle=-90,
    end_angle=180
    },
    {
    name='memperc',
    arg='',
    max=100,
    bg_colour=0xffffff,
    bg_alpha=0.2,
    fg_colour=0xffffff,
    fg_alpha=0.8,
    x=75, y=350,
    radius=25,
    thickness=5,
    start_angle=-90,
    end_angle=180
    },
    {
    name='swapperc',
    arg='',
    max=100,
    bg_colour=0xffffff,
    bg_alpha=0.2,
    fg_colour=0xffffff,
    fg_alpha=0.8,
    x=100, y=400,
    radius=25,
    thickness=5,
    start_angle=-90,
    end_angle=180
    },
    {
    name='fs_used_perc',
    arg='/',
    max=100,
    bg_colour=0xffffff,
    bg_alpha=0.2,
    fg_colour=0xffffff,
    fg_alpha=0.8,
    x=125, y=450,
    radius=25,
    thickness=5,
    start_angle=-90,
    end_angle=180
    },
    {
    name='downspeedf',
    arg='eth1',
    max=100,
    bg_colour=0xffffff,
    bg_alpha=0.2,
    fg_colour=0xffffff,
    fg_alpha=0.8,
    x=150, y=500,
    radius=25,
    thickness=4,
    start_angle=-90,
    end_angle=180
    },
    {
    name='upspeedf',
    arg='eth1',
    max=100,
    bg_colour=0xffffff,
    bg_alpha=0.2,
    fg_colour=0xffffff,
    fg_alpha=0.8,
    x=150, y=500,
    radius=20,
    thickness=4,
    start_angle=-90,
    end_angle=180
    },
    }

    -- Use these settings to define the origin and extent of your clock.

    clock_r=65

    -- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.

    clock_x=100
    clock_y=150

    show_seconds=true

    require 'cairo'

    function rgb_to_r_g_b(colour,alpha)
    return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
    end

    function draw_ring(cr,t,pt)
    local w,h=conky_window.width,conky_window.height

    local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
    local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

    local angle_0=sa*(2*math.pi/360)-math.pi/2
    local angle_f=ea*(2*math.pi/360)-math.pi/2
    local t_arc=t*(angle_f-angle_0)

    -- Draw background ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
    cairo_set_line_width(cr,ring_w)
    cairo_stroke(cr)

    -- Draw indicator ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
    cairo_stroke(cr)
    end

    function draw_clock_hands(cr,xc,yc)
    local secs,mins,hours,secs_arc,mins_arc,hours_arc
    local xh,yh,xm,ym,xs,ys

    secs=os.date("%S")
    mins=os.date("%M")
    hours=os.date("%I")

    secs_arc=(2*math.pi/60)*secs
    mins_arc=(2*math.pi/60)*mins+secs_arc/60
    hours_arc=(2*math.pi/12)*hours+mins_arc/12

    -- Draw hour hand

    xh=xc+0.7*clock_r*math.sin(hours_arc)
    yh=yc-0.7*clock_r*math.cos(hours_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xh,yh)

    cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
    cairo_set_line_width(cr,5)
    cairo_set_source_rgba(cr,1.0,1.0,1.0,1.0)
    cairo_stroke(cr)

    -- Draw minute hand

    xm=xc+clock_r*math.sin(mins_arc)
    ym=yc-clock_r*math.cos(mins_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xm,ym)

    cairo_set_line_width(cr,3)
    cairo_stroke(cr)

    -- Draw seconds hand

    if show_seconds then
    xs=xc+clock_r*math.sin(secs_arc)
    ys=yc-clock_r*math.cos(secs_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xs,ys)

    cairo_set_line_width(cr,1)
    cairo_stroke(cr)
    end
    end

    function conky_clock_rings()
    local function setup_rings(cr,pt)
    local str=''
    local value=0

    str=string.format('${%s %s}',pt['name'],pt['arg'])
    str=conky_parse(str)

    value=tonumber(str)
    pct=value/pt['max']

    draw_ring(cr,pct,pt)
    end

    -- Check that Conky has been running for at least 5s

    if conky_window==nil then return end
    local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)

    local cr=cairo_create(cs)

    local updates=conky_parse('${updates}')
    update_num=tonumber(updates)

    if update_num>5 then
    for i in pairs(settings_table) do
    setup_rings(cr,settings_table[i])
    end
    end

    draw_clock_hands(cr,clock_x,clock_y)
    end

  • Covergloobus: 1366 (modificado) + lyrics widget
  • Cursor: Gruppled White
  • Outros:

cedo

Sympathy In White And Black

width="625"

((ºº)) Rhrhrhr ((ºº))

width="625"

Red Impact

width="625"

((ºº)) Viper Rom ((ºº))

width="625"

((ºº)) Galaxy ((ºº))

width="625"

((ºº)) Batman ((ºº))

width="625"

Linux Mint 13

width="625"

((ººº)) Branco No Preto ((ººº))

width="625"

((ººº)) Preto No Branco ((ººº))

width="625"

Green Car

greenCar2

 

Enquanto NãO Há FéRias...

width="625"

((ºº)) Gnome Nature ((ºº))

width="625"

Gnome Of The Rings

width="312"width="312"

 

2-D

width="407"

 

Kde 4 Times

width="625"

Light Green

width="625"

((ºº)) Mergulhamdo Profundo ((ºº))

width="625"

2 Respostas ate agora.

  1. Rodrigo Centofante diz:

    Nossa! Estão caprichadíssimos. A galera possui uma criatividade incrível!! Parabéns a todos!

  2. Paulo diz:

    Uma coisa que estou achando interessante, já a várias semanas, é que o pessoal que usa Unity usa o 2D e não o 3D. Será que são pelos problemas do Unity 3D?

Deixe uma resposta a Rodrigo Centofante