Ambientes de trabalho dos leitores #49No artigo de hoje da Série de Ambientes de Trabalho dos Leitores do Ubuntued apresentamos-lhe 24 submissões. Neste conjunto de visuais, encontrará ideias das mais diversificadas. Aliás, são vários os ambientes aqui apresentados, desde o comum Unity, passando pelo LXDE, Gnome-Shell e até o lindíssimo Pantheon, do projeto Elementary!

Encontrará visuais limpos e complexos, coloridos e monocromáticos. Encontrará também várias configurações do conky bem como um conjunto de wallpapers muito interessantes. Procura ideias? Então veja este artigo! ;)

 

Como funciona esta série?

Esta série só existe porque os leitores do Ubuntued participam de forma ativa para a manter ao mais alto nível! Por esse simples motivo a sua participação é muito importante! Como você pode participar? Muito simples, visite esta página que disponibiliza uma aplicação (ver imagem abaixo) para agilizar o processo de partilha! E depois partilhe o seu visual aqui:

Fórum do Ubuntued: Mostre o seu Desktop!

Ubuntued Desktop

Como está feito este artigo?

Como é já comum nos outros artigos desta série, cada visual apresentado neste artigo é da responsabilidade do seu Autor. Quer isto dizer que, se tem alguma questão sobre esse visual, o melhor será você questionar diretamente o Autor ou então em resposta ao post que foi originalmente apresentado por esse Autor.

Para esse efeito, em cada um dos visuais apresentados neste artigo, você tem a oportunidade de ver a descrição redigida pelos Autores, o link para o local original desse ambiente (que você pode e deve aceder para questionar algo), link direto para a página do utilizador para o questionar diretamente. Relativamente às imagens tridimensionais apresentadas em algumas das participações, se você quiser ver com melhor definição os screenshots originais deverá visitar o link do local original, intitulado: “Página deste ambiente”.

Elementary Shell

width="312"width="312"
width="312"width="312"

Black And Red

width="625"

Simplicidade

width="625"

Be Original

width="625"

Blue Glass

width="625"

Ubuntudroid

width="625"

A RéPlica

width="625"

Meu Primeiro Lts

  • Página do Ambiente de Trabalho
  • Autor: Guilherme Paganini
  • Sistema Operativo: Ubuntu 12.04 LTS (Precise Pangolin)
  • Tema: Ambiance
  • Ambiente Gréfico: Unity 3D
  • Ícones: FS Icons Mono Dark http://ubuntued.info/fs-icons-ubuntu-os … -do-ubuntu
  • Wallpaper: http://2.bp.blogspot.com/-giSZCIomX-U/T … &White.jpg
  • Outros: Conky Lua, Rádio Tray, CompizConfig, Ubuntu Tweak
  • Instalação do conky: http://www.unixmen.com/configure-conky- … wto-conky/
  • .conkyrc:
    Código: Selecionar todos
    # Conky settings #
    background no
    update_interval 1
    cpu_avg_samples 2
    net_avg_samples 2

    override_utf8_locale yes

    double_buffer yes
    no_buffers yes

    text_buffer_size 2048
    #imlib_cache_size 0

    temperature_unit fahrenheit

    # Window specifications #

    own_window yes
    own_window_type override
    own_window_transparent yes
    own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below

    border_inner_margin 0
    border_outer_margin 0

    minimum_size 230 250
    maximum_width 300

    alignment tr
    gap_x 10
    gap_y 45

    # Graphics settings #
    draw_shades no
    draw_outline no
    draw_borders no
    draw_graph_borders no

    # Text settings #
    use_xft yes
    xftfont caviar dreams:size=8
    xftalpha 0.5

    uppercase no

    temperature_unit celsius

    default_color FFFFFF

    # Lua Load  #
    lua_load ~/.conky/clock_rings.lua
    lua_draw_hook_pre clock_rings

    #Cores
    color0 FF8C00
    color1 FFFAFA

    TEXT
    ${font FreeSans:size=22}${alignc}${color0}GPS${color1}
    #Dia
    ${voffset 0}${color1}${font FreeSans:size=16}${time %A}${font}${voffset -8}${alignr 50}${color0}${font FreeSans:size=38}${time %e}${font}
    ${color0}${voffset -30}${font FreeSans:size=18}${time %b}${font}${voffset -3} ${font FreeSans:size=20}${time %Y}${font}${color1}${hr}

    ${color0}${goto 0}${voffset 188}${font FreeSans:size=7}${cpu cpu0}%
    ${color1}${goto 0}${font FreeSans:size=8}CPU${font}
    ${color0}${goto 47}${voffset -28}${font FreeSans:size=7}${memperc}%
    ${color1}${goto 45}${font FreeSans:size=8}RAM${font}
    ${color0}${goto 92}${voffset -28}${font FreeSans:size=7}${swapperc}%
    ${color1}${goto 90}${font FreeSans:size=8}Swap${font}
    ${color0}${goto 0}${voffset 25}${font FreeSans:size=7}${wireless_link_qual_perc wlan0}%
    ${color1}${goto 0}${font FreeSans:size=8}Wireless${font}
    ${color0}${goto 47}${voffset -28}${font FreeSans:size=7}${downspeed wlan0}
    ${color1}${goto 45}${font FreeSans:size=8}Down${font}
    ${color0}${goto 92}${voffset -28}${font FreeSans:size=7}${upspeed wlan0}
    ${color1}${goto 90}${font FreeSans:size=8}Up${font}
    ${color0}${goto 0}${voffset 25}${font FreeSans:size=7}${fs_used_perc /}%
    ${color1}${goto 0}${font FreeSans:size=8}Ubuntu${font}
    ${color0}${goto 47}${voffset -28}${font FreeSans:size=7}${fs_used_perc /home}%
    ${color1}${goto 45}${font FreeSans:size=8}Docs${font}
    ${color0}${goto 92}${voffset -28}${font FreeSans:size=7}${fs_used_perc /media/sda4}%
    ${color1}${goto 90}${font FreeSans:size=8}Win${font}

    # System
    ${color0}${font FreeSans:size=10}Sistema ${color1}${hr}${font}
    Kernel:  ${alignr}${color0}${kernel}${color1}
    Hostname: ${alignr}${color0}${nodename}${color1}
    Tempo Ligado: ${alignr}${color0}${uptime}${color1}
    Tempo de bateria: ${alignr}${color0}${battery_time}${color1}
    Temperatura da CPU: ${alignr}${font FreeSans:size=8}${color0}${hwmon 0 temp 2}°C${color1}${font}
    Temperatura do disco: ${alignr}${font FreeSans:size=8}${color0}${hddtemp /dev/sda}°C${color1}${font}
    ${image ~/.conky/new-ubuntu-logo.png -p 150,560 -s 80×25}

    clock_rings.lua:

    Código: Selecionar todos
    --[[
    Clock Rings by Linux Mint (2011) reEdited by despot77 E editado novamente por LeandroNKZ, reeditado novamente por Guilherme Paganini.
    This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.

    IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num>5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num>3; conversely if you update Conky every 0.5s, you should use update_num>10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.

    To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
    lua_load ~/scripts/clock_rings.lua
    lua_draw_hook_pre clock_rings

    Changelog:
    + v1.0 -- Original release (30.09.2009)
    v1.1p -- Jpope edit londonali1010 (05.10.2009)
    *v 2011mint -- reEdit despot77 (18.02.2011)
    vBrWeather -- modificado por leandroNKZ
    *v1.4 -- modificado por Guilherme Paganini (28.04.2011)
    ]]

    settings_table = {
    {
    -- Edit this table to customise your rings.
    -- You can create more rings simply by adding more elements to settings_table.
    -- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
    name='time',
    -- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
    arg='%I.%M',
    -- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
    max=11.7,
    -- "bg_colour" is the colour of the base ring.
    bg_colour=0xFFFFFF,
    -- "bg_alpha" is the alpha value of the base ring.
    bg_alpha=0.1,
    -- "fg_colour" is the colour of the indicator part of the ring.
    fg_colour=0xFF8C00,
    -- "fg_alpha" is the alpha value of the indicator part of the ring.
    fg_alpha=0.3,
    -- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
    x=115, y=200,
    -- "radius" is the radius of the ring.
    radius=35,
    -- "thickness" is the thickness of the ring, centred around the radius.
    thickness=5,
    -- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
    start_angle=0,
    -- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
    end_angle=360
    },
    {
    name='time',
    arg='%M.%S',
    max=60,
    bg_colour=0xffffff,
    bg_alpha=0.1,
    fg_colour=0xFF8C00,
    fg_alpha=0.4,
    x=115, y=200,
    radius=45,
    thickness=5,
    start_angle=0,
    end_angle=360
    },
    {
    name='time',
    arg='%S',
    max=60,
    bg_colour=0xffffff,
    bg_alpha=0.1,
    fg_colour=0xFF8C00,
    fg_alpha=0.6,
    x=115, y=200,
    radius=55,
    thickness=5,
    start_angle=0,
    end_angle=360
    },
    {
    name='time',
    arg='%m',
    max=12,
    bg_colour=0xffffff,
    bg_alpha=0.1,
    fg_colour=0xFF8C00,
    fg_alpha=0.8,
    x=115, y=200,
    radius=65,
    thickness=5,
    start_angle=180,
    end_angle=360
    },
    {
    name='time',
    arg='%d',
    max=31,
    bg_colour=0xffffff,
    bg_alpha=0.1,
    fg_colour=0xFF8C00,
    fg_alpha=1,
    x=115, y=200,
    radius=75,
    thickness=5,
    start_angle=0,
    end_angle=180
    },
    {
    name='cpu',
    arg='cpu0',
    max=100,
    bg_colour=0xffffff,
    bg_alpha=0.2,
    fg_colour=0xFF8C00,
    fg_alpha=0.8,
    x=25, y=315,
    radius=20,
    thickness=5,
    start_angle=-90,
    end_angle=180
    },
    {
    name='memperc',
    arg='',
    max=100,
    bg_colour=0xffffff,
    bg_alpha=0.2,
    fg_colour=0xFF8C00,
    fg_alpha=0.8,
    x=70, y=315,
    radius=20,
    thickness=5,
    start_angle=-90,
    end_angle=180
    },
    {
    name='swapperc',
    arg='',
    max=100,
    bg_colour=0xffffff,
    bg_alpha=0.2,
    fg_colour=0xFF8C00,
    fg_alpha=0.8,
    x=115, y=315,
    radius=20,
    thickness=5,
    start_angle=-90,
    end_angle=180
    },
    {
    name='wireless_link_qual_perc',
    arg='wlan0',
    max=100,
    bg_colour=0xffffff,
    bg_alpha=0.2,
    fg_colour=0xFF8C00,
    fg_alpha=0.8,
    x=25, y=365,
    radius=20,
    thickness=5,
    start_angle=-90,
    end_angle=180
    },
    {
    name='downspeedf',
    arg='wlan0',
    max=100,
    bg_colour=0xffffff,
    bg_alpha=0.2,
    fg_colour=0xFF8C00,
    fg_alpha=0.8,
    x=70, y=365,
    radius=20,
    thickness=5,
    start_angle=-90,
    end_angle=180
    },
    {
    name='upspeedf',
    arg='wlan0',
    max=100,
    bg_colour=0xffffff,
    bg_alpha=0.2,
    fg_colour=0xFF8C00,
    fg_alpha=0.8,
    x=115, y=365,
    radius=20,
    thickness=5,
    start_angle=-90,
    end_angle=180
    },
    {
    name='fs_used_perc',
    arg='/',
    max=100,
    bg_colour=0xffffff,
    bg_alpha=0.2,
    fg_colour=0xFF8C00,
    fg_alpha=0.8,
    x=25, y=415,
    radius=20,
    thickness=5,
    start_angle=-90,
    end_angle=180
    },
    {
    name='fs_used_perc',
    arg='/home',
    max=100,
    bg_colour=0xffffff,
    bg_alpha=0.2,
    fg_colour=0xFF8C00,
    fg_alpha=0.8,
    x=70, y=415,
    radius=20,
    thickness=5,
    start_angle=-90,
    end_angle=180
    },
    {
    name='fs_used_perc',
    arg='/media/sda4',
    max=100,
    bg_colour=0xffffff,
    bg_alpha=0.2,
    fg_colour=0xFF8C00,
    fg_alpha=0.8,
    x=115, y=415,
    radius=20,
    thickness=5,
    start_angle=-90,
    end_angle=180
    },
    }

    -- Use these settings to define the origin and extent of your clock.

    clock_r=65

    -- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.

    clock_x=115
    clock_y=200

    show_seconds=true

    require 'cairo'

    function rgb_to_r_g_b(colour,alpha)
    return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
    end

    function draw_ring(cr,t,pt)
    local w,h=conky_window.width,conky_window.height

    local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
    local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

    local angle_0=sa*(2*math.pi/360)-math.pi/2
    local angle_f=ea*(2*math.pi/360)-math.pi/2
    local t_arc=t*(angle_f-angle_0)

    -- Draw background ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
    cairo_set_line_width(cr,ring_w)
    cairo_stroke(cr)

    -- Draw indicator ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
    cairo_stroke(cr)
    end

    function draw_clock_hands(cr,xc,yc)
    local secs,mins,hours,secs_arc,mins_arc,hours_arc
    local xh,yh,xm,ym,xs,ys

    secs=os.date("%S")
    mins=os.date("%M")
    hours=os.date("%I")

    secs_arc=(2*math.pi/60)*secs
    mins_arc=(2*math.pi/60)*mins+secs_arc/60
    hours_arc=(2*math.pi/12)*hours+mins_arc/12

    -- Draw hour hand

    xh=xc+0.7*clock_r*math.sin(hours_arc)
    yh=yc-0.7*clock_r*math.cos(hours_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xh,yh)

    cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
    cairo_set_line_width(cr,5)
    cairo_set_source_rgba(cr,1.0,1.0,1.0,1.0)
    cairo_stroke(cr)

    -- Draw minute hand

    xm=xc+clock_r*math.sin(mins_arc)
    ym=yc-clock_r*math.cos(mins_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xm,ym)

    cairo_set_line_width(cr,3)
    cairo_stroke(cr)

    -- Draw seconds hand

    if show_seconds then
    xs=xc+clock_r*math.sin(secs_arc)
    ys=yc-clock_r*math.cos(secs_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xs,ys)

    cairo_set_line_width(cr,1)
    cairo_stroke(cr)
    end
    end

    function conky_clock_rings()
    local function setup_rings(cr,pt)
    local str=''
    local value=0

    str=string.format('${%s %s}',pt['name'],pt['arg'])
    str=conky_parse(str)

    value=tonumber(str)
    pct=value/pt['max']

    draw_ring(cr,pct,pt)
    end

    -- Check that Conky has been running for at least 5s

    if conky_window==nil then return end
    local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)

    local cr=cairo_create(cs)

    local updates=conky_parse('${updates}')
    update_num=tonumber(updates)

    if update_num>5 then
    for i in pairs(settings_table) do
    setup_rings(cr,settings_table[i])
    end
    end

    draw_clock_hands(cr,clock_x,clock_y)
    end

width="312"width="312"

Previously On Lost

width="312"width="312"

Retina'S Pantheon

width="625"

Beautiful Simplicity

width="312"width="312"
width="312"width="312"

Azul Leve

width="312"width="312"
width="312"width="312"

Arch Of Doom

width="625"

Elementary Earth

width="625"

Ubuntu Purple Abstract

width="407"

Terra

width="625"

Nebula 12.04

width="312"width="312"
width="312"width="312"

Maçã Elementar

width="407"

PARENTHOOD

Apple Ubuntu

width="625"

Xubuntu Like Unity

width="312"width="312"

Ambience Polished

width="312"width="312"

Ubuntu Black And White V.2

width="625"

Apple In The Sky With Elementary

8 Respostas ate agora.

  1. Rogerio diz:

    como eu faço para instalar um desses temas apresentados no meu Ubuntu??

  2. Guilherme diz:

    Esse conky do ZehEdu ficou sensacional!

  3. Ron diz:

    Esta coleção de Ambientes ficou muito boa! Todos os contribuidores fizeram um ótimo trabalho. O meu favorito é o A Réplica.

  4. Di' stante diz:

    O Pantheon, ambiente gráfico do tão aguardado Elementary OS Luna deixou-me curioso. Aguardarei uma versão estável para testá-lo.

  5. Daniel diz:

    Azul Leve ganhou nessa edição. Graças principalmente ao tema de janelas.

  6. yuryrodrigues diz:

    O Elementary Shell do ron e A RéPlica do José estão belíssimos.
    Retina'S Pantheon está fora do comum e ao mesmo tempo esplendido.
    O Beautiful Simplicity do arison está de encher os olhos…
    Embora eu não goste do visual do OS do Mac, o Apple Ubuntu do ron está de parabéns.
    O Xubuntu Like Unity está com um visual muito elegante.

Deixe um comentario